|ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors

[BFEHB]

I have the Sense 2.5 Cookie June 11th ROM installed on my phone and initially I really, thoroughly enjoyed it! Unfortunately (after about a month or so), it started to progressively become more and more problematic and seemingly unstable with lockups. Finally, one day the phone just stopped working: I could not get any key to work including the power button. I pulled the battery to see if that would help, it did not.

So, I entered bootloader mode and reinstalled the ROM. I called the Verizon *228 number to get the phone set up again with Verizon. Everything seemed okay, except that I could not get the Data Connection to work, even the toggle button produced either an Error 8 or Error 11 message. I called Verizon and had them reset the A-key, as was suggested on the forum here, no joy! I have reinstalled the ROM with the Airplane Mode turned On, no joy! I have made sure the user name and pw are correct. No luck!

Verizon has no idea what to do and suggested that they would ship a new phone, which is nice and all but.... I would have to reinstall the original ROM, figure out how to relock the phone, radio and SIM card and hope that I do it correctly so as to not void the warranty.

I know that there are other folks that have had the data connection error (I have followed what I believe to be all the suggested steps to resolving this issue) and I was wondering if I am simply missing a step to get this resolved. Any help that you can offer would be greatly appreciated. Cheers!

[bmick2003]

i just install energy rom 23673 jul24, great rom, very stable and fast. i only have one issue, on the lock screen new text messages are automatically displayed. is there anyway that i can get a notification rather than having the whole message displayed???

[muzik]

Originally Posted by bmick2003

i just install energy rom 23673 jul24, great rom, very stable and fast. i only have one issue, on the lock screen new text messages are automatically displayed. is there anyway that i can get a notification rather than having the whole message displayed???

A good example of how no one rom can please everyone...I really like that feature. If I can see it isn't important I don't have to unlock and go there to read it. I love the new 7/24 GTX. Maybe there will be a fix someone will have or come up with. You could use a different locker?

When I do as you ask, it does as expected...goes to the calendar... then goes back to the today screen.

Originally Posted by m4f1050

Can you please hit the date (top right of the time) on MaxSense and then hit "CANCEL" button, let me know what happens?

Thanks!!

[ryanmv213]

If anyone is interested in overclocking there phone I have combined a couple of the brilliant guides and ideas from xda into something that worked extremely well my tp2. I originally posted this in Bignadad's thread but I'm currently using this on NRGZ's ROM and it works brilliant. I'll describe the setup I'm using with the newest script by jpc073 at xda for the last day and I've been getting great benchmarks and no battery drain. I am happy to say I am now overclocked at 729 mhz stable without SOD and without having to change the frequency every time the phone sleeps.

Follow the easy guide by Buru898 in this post: http://forum.xda-developers.com/showthread.php?p=7330081#post7330081 BUT replace the arguments; 'under.mscr' at the end of 'step 4' with the 'startup.mscr' you create here by using this script : http://forum.xda-developers.com/showpost.php?p=7344437&postcount=602. Highlight the entire script and drop it into a blank text document and save it as 'startup.mscr'(without the quotations). This script may have to be edited to find where you DispOn is located within your registry. Here are those steps to find and edit the mortscript to make sure it will work with your TP2 (I found the DispOn in my registry under HKLM\Drivers\Display).
1. On your phone open the registry editor and search for "DispOn" in the entire registry. If it does not show you won't be able to use this script. You could, however still use the power script and OC always to 604 but that is no fun!
2. Once you have the location of the "DispOn" Value ensure this is right in the script. To do this first locate the Root it is found in. This will be HKLM, HKCU etc. Ensure that the Root is correct in the script (the one I posted it is "HKCU"). To change this look for 'reg_root = "HKCU"' in the script. Change the HKCU to whatever the root is that your "DispOn" was found in.
3. Next do the same thing for the key. Locate the line 'reg_key_bkl = "ControlPanel\BackLight"' and change the ControlPanel\BackLight to whatever the Key is that your "DispOn" was found in.

After this is saved then copy it to the root of your registry with total commander. Edit the file with total commander and make sure it is startup.mscr and not startup.mscr.txt. Once again this mortscript you created will be used instead of under.mscr in the arguments at the end of step 4 in Buru898's guide and follow the rest of the steps. I'll include my startup.mscr that works for sprint tp2 if anyone's interested. You can also change the values inside the startup.mscr when it is a text document because some tp2's can run a higher overclocked frequency. Mine works great at 768 but 787 is an EPIC FAIL!

[DaveTN]

Originally Posted by BFEHB

I have the Sense 2.5 Cookie June 11th ROM installed on my phone and initially I really, thoroughly enjoyed it! Unfortunately (after about a month or so), it started to progressively become more and more problematic and seemingly unstable with lockups. Finally, one day the phone just stopped working: I could not get any key to work including the power button. I pulled the battery to see if that would help, it did not.

So, I entered bootloader mode and reinstalled the ROM. I called the Verizon *228 number to get the phone set up again with Verizon. Everything seemed okay, except that I could not get the Data Connection to work, even the toggle button produced either an Error 8 or Error 11 message. I called Verizon and had them reset the A-key, as was suggested on the forum here, no joy! I have reinstalled the ROM with the Airplane Mode turned On, no joy! I have made sure the user name and pw are correct. No luck!

Verizon has no idea what to do and suggested that they would ship a new phone, which is nice and all but.... I would have to reinstall the original ROM, figure out how to relock the phone, radio and SIM card and hope that I do it correctly so as to not void the warranty.

I know that there are other folks that have had the data connection error (I have followed what I believe to be all the suggested steps to resolving this issue) and I was wondering if I am simply missing a step to get this resolved. Any help that you can offer would be greatly appreciated. Cheers!

I would start by going back to the original radio for your phone.

After you do that try Start > Tools > Carrier Provisioning > Verizon and see if that helps.

If all else fails, flash back to stock rom to make sure your phone is ok before you return it.

and NEVER tell tech support you are running a non-standard ROM. Warranty orn not, you will be stuch with it and tech support will no longer help you.

David

[bteljuice]

Originally Posted by ryanmv213

If anyone is interested in overclocking there phone I have combined a couple of the brilliant guides and ideas from xda into something that worked extremely well my tp2. I originally posted this in Bignadad's thread but I'm currently using this on NRGZ's ROM and it works brilliant. I'll describe the setup I'm using with the newest script by jpc073 at xda for the last day and I've been getting great benchmarks and no battery drain. I am happy to say I am now overclocked at 729 mhz stable without SOD and without having to change the frequency every time the phone sleeps.

Follow the easy guide by Buru898 in this post: http://forum.xda-developers.com/showthread.php?p=7330081#post7330081 BUT replace the arguments; 'under.mscr' at the end of 'step 4' with the 'startup.mscr' you create here by using this script : http://forum.xda-developers.com/showpost.php?p=7344437&postcount=602. Highlight the entire script and drop it into a blank text document and save it as 'startup.mscr'(without the quotations). This script may have to be edited to find where you DispOn is located within your registry. Here are those steps to find and edit the mortscript to make sure it will work with your TP2 (I found the DispOn in my registry under HKLM\Drivers\Display).
1. On your phone open the registry editor and search for "DispOn" in the entire registry. If it does not show you won't be able to use this script. You could, however still use the power script and OC always to 604 but that is no fun!
2. Once you have the location of the "DispOn" Value ensure this is right in the script. To do this first locate the Root it is found in. This will be HKLM, HKCU etc. Ensure that the Root is correct in the script (the one I posted it is "HKCU"). To change this look for 'reg_root = "HKCU"' in the script. Change the HKCU to whatever the root is that your "DispOn" was found in.
3. Next do the same thing for the key. Locate the line 'reg_key_bkl = "ControlPanel\BackLight"' and change the ControlPanel\BackLight to whatever the Key is that your "DispOn" was found in.

After this is saved then copy it to the root of your registry with total commander. Edit the file with total commander and make sure it is startup.mscr and not startup.mscr.txt. Once again this mortscript you created will be used instead of under.mscr in the arguments at the end of step 4 in Buru898's guide and follow the rest of the steps. I'll include my startup.mscr that works for sprint tp2 if anyone's interested. You can also change the values inside the startup.mscr when it is a text document because some tp2's can run a higher overclocked frequency. Mine works great at 768 but 787 is an EPIC FAIL!

I have been using Buru's procedure and works great for me but only at 710. Above that is SOD.

Anyhow, I will test yours as well and try it out. If it works as described, I'll add it in this thread made for TP2 CDMA here http://forum.ppcgeeks.com/showthread...80#post1883080

it is the same one as NetRipper but here on TP2 PPCGeeks after his authorization was accepted since not everyone here is on XDA.

[KIOWA69]

Originally Posted by rocknyc

LOL...my bad. i did an overall forum search for 'keyboard problem' and came up with a million results. i'm usually pretty diligent in searching forums before asking questions but i didn't really know what keywords to search for. glad to hear it's an easy fix.

Yeah like they said it's an easy fix, I understand Dave's frustration as I have answered this quiet a few times myself, but at least you tried to do a search on it, but from now on to help you out if you at least read the OPs <original poster> first few posts you'll see some of the issues, fixes and cabs for the ROM, and I would advise reading the last 5-10 pages so you know how the ROM is running and what issues everyone is having. Now to answer your question you need the sprint keyboard fix with is on the first page within the first couple of posts, download that, install, soft reset phone and type away.

[KIOWA69]

Originally Posted by freshpl

How can I run the WIFIROUTER when the screen goes into standby?

also how can I change the ringtone so it rings and not VIB+RING
(I have the ring option for ring only)

Go up one level to where you clicked the link to get in this thread, look off to the right side of the thread name and you will see a paperclip icon, click that and it will show all the things that have been uploaded to this thread, look for the wi-fi in standby cab and download and install that.

To change how your phone acts when you receive a call go here start>settings>sounds and notifications>at the top press the arrow to the right to go to notifications>then look for ring type and change it there.

[chuggy]

Hey Everyone,

I was having some issues with the last MaxSense ROM so i decided to flash the newest ROM.

I flashed to stock, ran task29, flashed the newest ROM, and now i cannot make a call. I was getting the "cannot complete the call. Signal may be unavailable" message, but now i hit talk and it simply doesnt connect, and drops the call.

Any ideas?