H|July 4|.¸¸.·´¯`·.¸¸. Energy .¸¸.·´¯ 6.5|21916 / 6.5.X|29022 * Sense 2019

[DrUnKeN_TiGeR]

i dont wanna hard reset (

[erkme73]

Originally Posted by rootlinux

Let the Stock rom fully setup before flashing to NRG.
That will make sure it is fully working before you try another flash.
Check the stock setup for any problems since you are having issues.
If you have the same issues with the stock rom you may have a problem with the device itself.

Flash to stock hard reset and then check for errors.
If it is good to go then flash to NRG and see if the problems come back.

Let us know what happens and if you need help just post back.
Good flashing will save you a TON of headaches.

Stock shipped stprint image flashed great... installed standard 9/05 (thx ahuskis). It booted up after frst flash, finished configuration, and did another HR. It's booting up now. "setting up device" for second time now... Should know if this worked in just a few minutes.

[ahuskins]

Originally Posted by DrUnKeN_TiGeR

i dont wanna hard reset (

Did you soft reset?

[ahuskins]

Originally Posted by erkme73

Stock shipped stprint image flashed great... installed standard 9/05 (thx ahuskis). It booted up after frst flash, finished configuration, and did another HR. It's booting up now. "setting up device" for second time now... Should know if this worked in just a few minutes.

This is good. Which is faster Ambien or NRG ROM?

[EricBergan]

Originally Posted by DrUnKeN_TiGeR

i dont wanna hard reset (

Sashimi is your friend - not trivial to get set up, but pays huge dividends on future ROM downloads and hard resets!

[DrUnKeN_TiGeR]

Originally Posted by ahuskins

Did you soft reset?

many times

[DrUnKeN_TiGeR]

Originally Posted by EricBergan

Sashimi is your friend - not trivial to get set up, but pays huge dividends on future ROM downloads and hard resets!

i have vip installer something er other dont member never set it up i think its a mortscript

[erkme73]

Ok all caught up:

Sprint OEM shipped image flashed
Completely installed with stock customizations
Dialer worked just fine. No delays.
Hard reset.
Reloaded/customized back into stock image.
Again, no problems.
Flahsed Energy 9/5/09 standard rom
Booted, customized, rebooted.
Hard Reset
Booted, customized itself, rebooted.

Now, when I make a call, the soft hangup button appears to work so long as I hang up AFTER the call has connected. If i hang up while it still says "dialing", it hangs, and the call continues. The screen drops out of the dialer, back to the today screen.

Pressing the talk/phone button brings nothing but panic. These are very similar symptoms to the original post.

How do I know what the default dialer is on the standard Rom, and how to I change it? I'm embarassed taht I don't know these things. I am watching the sushimi tutorial videos on youtub though - that has to count for something

[erkme73]

Originally Posted by ahuskins

This is good. Which is faster Ambien or NRG ROM?

At it's peak, I had a hard time forming sentences - or even getting out of the PM section to post a thanks publicly. It's potent stuff. No roosters in my room, that's for sure. On the upside, i have no recollection of what I do for four hours after I take one.

I might just find my mailbox post in my garage tomorrow, spackled, sanded and painted - with no clue who did it... but it was me. Great way to get work done around the house. Though, I'm sure it kickstarts allzheimers somehow.

[iknowsquat]

Originally Posted by erkme73

Ok all caught up:

Sprint OEM shipped image flashed
Completely installed with stock customizations
Dialer worked just fine. No delays.
Hard reset.
Reloaded/customized back into stock image.
Again, no problems.
Flahsed Energy 9/5/09 standard rom
Booted, customized, rebooted.
Hard Reset
Booted, customized itself, rebooted.

Now, when I make a call, the soft hangup button appears to work so long as I hang up AFTER the call has connected. If i hang up while it still says "dialing", it hangs, and the call continues. The screen drops out of the dialer, back to the today screen.

Pressing the talk/phone button brings nothing but panic. These are very similar symptoms to the original post.

How do I know what the default dialer is on the standard Rom, and how to I change it? I'm embarassed taht I don't know these things. I am watching the sushimi tutorial videos on youtub though - that has to count for something

First page, Post #3 nrgz has a tachi disabler cab, BUT read the warning, you wont be able to dial from Touch Flo.