|ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors

[GarrettSR5]

Originally Posted by GarrettSR5

Alright guys small issue. My phone won't send MMS. I can upload them to Facebook directly after taking the picture. But when I try to send them to someone via MMS, the phone "sends" it. Well says it does but they never get them. I tried emailing them via MMS and same thing.
It's a VZW TP2 on this ROM.

Thanks! (I didn't wanna make a new thread)

Anyone know the answer to this?

[KIOWA69]

Originally Posted by GarrettSR5

Anyone know the answer to this?

did you provision the phone for verizon after flashing the rom and letting it boot up? I would do that, then go in and check to make sure that all your settings are correct, sounds like a small issue if everything else is working and just your mms isn't. hopefully someone with verizon will chime in and post there settings so you can make sure that yours are set correctly.

[alacuna]

Originally Posted by KIOWA69

two ways to handle this, in CHT you have the option to enable wifi on in standby, and if that doesn't work then there is a cab file in the paperclip for the thread that has a cab for wifi on when in standby, one of those will work.

Sorry am a newbie at this. Can you tell me where the paperclip is with the cab file for this fix?

[KIOWA69]

Originally Posted by alacuna

Sorry am a newbie at this. Can you tell me where the paperclip is with the cab file for this fix?

Sorry I'm at work and check the site ocassionally when I have a chance. First off I'm pretty sure that the provisioning for Verizon is in the ROM already so you would be better off trying that first, if I remember right it's under tools and look for provisioning, click that then it will bring up a box asking you for your carrier, pick Verizon and then reboot phone and it should automatically set everything up for you. The paperclip is up one level where you clicked the link to get into this thread, if you look off to the right side of the thread name you will see a little paperclip and if you click that it will bring up all attachments that have ever been uploaded to this thread, then scroll down and look for Verizon MMS settings cab and then download that and then put it on your sd card wherever you store your cab files and then run that from your phone. Here's the link for the one that I seen in there, but I wouldn't try it until after you have seen if provisioning worked first.

http://forum.ppcgeeks.com/attachment...-5.2.12.45.cab

[GarrettSR5]

Hm my provisioning was not set. I'll set it and see what happens.

Thanks! This forum is awesome!


May have spoke too soon. As it was installing it asked me if I wanted to remove the old version of Verizon provisioning so I said yes then it said it could not be removed would i Like to continue? I just hit yes. And it said it was unsuccessful.

[KIOWA69]

Originally Posted by GarrettSR5

Hm my provisioning was not set. I'll set it and see what happens.

Thanks! This forum is awesome!


May have spoke too soon. As it was installing it asked me if I wanted to remove the old version of Verizon provisioning so I said yes then it said it could not be removed would i Like to continue? I just hit yes. And it said it was unsuccessful.

I'm not 100% sure but I would guess that the provisioning cab that's in the rom is newer than what's in the paperclip, you can run the provisioning cab that's included in the rom as much as you want and it shouldn't mess anything up, so just run what's in the rom and then soft reset your phone and all should be good to go.

[sly]

Originally Posted by Van G

Apologies in advance, can't locate: Looking for the link to the transparent image replacement to fix the dark red overlay on Contacts.

Going to flash 29017 21st tonight.

Look here: xda-developers - View Single Post - R [WWE|GER|FRA|ITA|NLD] |Mar 15| Energy™-.¸¸.·´¯ 6.5|21916 / 6.5.X|29017 * Sense 2021

I use RedContactCardFix-Texture.cab and it works great.

[frozenbutt]

Running the latest Titanium with IphoneToday and it is working wonderful. Thanks NRG. I do have one question/request for help. My contact info is hard to read. I can only see the number or info for the one that is highlighted. The rest I cannot see at all. Anyway to change the colours??



What you see in the rusty red with black text is unreadable on the phone. I can see that the black is there but can't read it at all. Must be some way to change it or a cab to replace the contact program??

Thanks

Paul

[speedyd718]

Originally Posted by frozenbutt

Running the latest Titanium with IphoneToday and it is working wonderful. Thanks NRG. I do have one question/request for help. My contact info is hard to read. I can only see the number or info for the one that is highlighted. The rest I cannot see at all. Anyway to change the colours??



What you see in the rusty red with black text is unreadable on the phone. I can see that the black is there but can't read it at all. Must be some way to change it or a cab to replace the contact program??

Thanks

Paul

look at the post before yours if you haven't already. the answer is there.

[NinjaDuck]

Originally Posted by PPCFreak

Wirelessly posted (VZW TP2: Opera/9.7 (WindowsMobile; PPC; Opera Mobi/35267; U; en; Presto/2.1.1))

having issue with wifi router.
It connects and works but when the backlight goes out and the device locks, i
I loose the connection.
Do I need the wifi on standby installed to keep the wifi router connected when device goes to standby?

Thought wifi router already did this.

Am looking forward to flashing the new roms tonight.

Thanks all.

Originally Posted by KIOWA69

two ways to handle this, in CHT you have the option to enable wifi on in standby, and if that doesn't work then there is a cab file in the paperclip for the thread that has a cab for wifi on when in standby, one of those will work.

I whipped up another more manual option for you that hopefully brings some additional utility. I have wanted to do this for myself for some time now. I like to disable WIFI on sleep personally for battery performance.

The attached cab has two mort scripts with Shortcuts in the tools folder that disable sleep (store your current config) and enable it with your previous values.

Let me know how it works out for you.

You will need to reboot to have the attached icons show up. The one with red eye piece disables sleep.

I had left feedback for NRG here. Feel free to click +1 on it. He responded that the router should do that by default.

Mortscript to disable sleep while ... / General forum / Energy ROM Feedback

You can actually take the mortscript and have it disable sleep, launch the router, wait for it to close, and enable sleep again if you like. If you do the work, please post back.