|ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors

[Monfro]

Originally Posted by krazydude

thanks nrg for the reply!!
btw sir my salutations for a super rom
can u advise which cab might be acting up? also would really appreciate your help on deciding which cabs to remove..I install a lot of battery saving cabs and cabs recommended by other PPC geekers and most of them are available on the paperclip..at the end of the day am yet a noob..so i take advise and install the cabs in my UC folder.
so here goes :
01.No push internet v2
nue battery 2
02ssk tp2 dynamic resource proxy
04Nrgz disable document indexer
20 Louder phone
Astro Navigator 2
Atom enhanced d3d driver
clean ram
core player 1.3.5
hypnotic 2010 all battery tweaks
ipollesion tp2 colume increase
maxx 134 battery savingreduce polling
mini 5 wm (opera mini)
neos2007 driver pack 3
new maxx complete battery tweaks
shaolin battery saver
resco explorer 8.10
spb mobile shell v3.5.5
spb taveller 2.9.0
spb wireless moniotor
swype 3.9.5032
verizon keyboard fix
wvgafix4 (for changing screen resolution to run astro navigator)
ziggy 471 backup and restore
the others are my email customizations etc

would really appreciate your help on which cabs i can remove from this list..and which cab might be affecting the dialer??
cheers

On the same standard version everything was running fine for me, without problems at all.

There are not needed for sure:
- 04Nrgz disable document indexer (no more Document tab cooked)
- Atom enhanced d3d driver (cooked in rom)

NRGZ suggested to not run neos2007 driver pack 3.

I think you run too many battery saving cab...one should be enough (test what is working best for you).

What "ziggy 471 backup and restore" does??
If it backup registry entries and you flash a rom based on a different WM build than the version you had before it probably will break a lot of things (eg. backup of 28244 and restore with 29013).

[krazydude]

Originally Posted by Monfro

On the same standard version everything was running fine for me, without problems at all.

There are not needed for sure:
- 04Nrgz disable document indexer (no more Document tab cooked)
- Atom enhanced d3d driver (cooked in rom)

NRGZ suggested to not run neos2007 driver pack 3.

I think you run too many battery saving cab...one should be enough (test what is working best for you).

What "ziggy 471 backup and restore" does??
If it backup registry entries and you flash a rom based on a different WM build than the version you had before it probably will break a lot of things (eg. backup of 28244 and restore with 29013).

thnx for the feedback monfro (+1)
i normally dont use ziggy backup.
i guess i just have it stored on xda_uc and have been too lazy to remove it.(now is a good time to remove it
thanks for the suggestions tho...
but yet cannot figure what is messing up the dialer..any ideas?

[krazydude]

reflashed the rom...and did task 29 also!!!!
also took out the cabs indicated by monfro
also reinstalled monfros dialer via cab file again......
but yet same problem
any help NRG / monfro / anyone?????
cheers

[teradog]

hey krazey... ur not posting much any more..
u know the process, do not load anything including UC... dont let it run.. install rom & use with NO changes.. see here: #30924

if the prob. is gone then... go to the next step

*edit* here's what I (only MHO) would leave in there...

Originally Posted by krazydude

... deciding which cabs to remove.....
01.No push internet v2
04Nrgz disable document indexer
20 Louder phone
Astro Navigator 2
clean ram
ipollesion tp2 colume increase ???prob take out???
mini 5 wm (opera mini) (I dumped mini & tweaked NRG version, just as fast...)
new maxx complete battery tweaks
resco explorer 8.10
spb mobile shell v3.5.5
spb taveller 2.9.0
spb wireless moniotor
verizon keyboard fix
wvgafix4 (for changing screen resolution to run astro navigator)
....cheers

CHEERS!

[madkoopa]

Originally Posted by MisterTedster

Im using Energy.RHODCDMA.29013.Sense2.5.Cookie.2.0.sencity. Mar.12 and everytime I put the phone down face-up it unlocks on its own. Is this some kind of new feature or a bug? If it's a feature, how do I disable it?

I'm a noob, so my advice may not be as direct:

It sounds like the proximity sensor is on. Go to your CHTEditor settings and there may be a setting to turn the proximity sensor off. Or if you scroll to the right on your home screen, there may be a toggle switch button to turn it off or on with.

[eazy2001x]

Originally Posted by MisterTedster

Im using Energy.RHODCDMA.29013.Sense2.5.Cookie.2.0.sencity. Mar.12 and everytime I put the phone down face-up it unlocks on its own. Is this some kind of new feature or a bug? If it's a feature, how do I disable it?

I have a problem like this with the phone upside down.. I pocket dialed a few times because of this. Grr..

[fade007]

Originally Posted by mdphoenix

Well, that's two of us. Anyone else? I swore there were more people with this issue.

I too have the bluetooth hangup problem.
I've had it on all NRG ROMS that I've flashed.
Same with my wife's TP2.

I use a Jabra BTooth headset and she uses Ford's Sync.

Didn't have the problem on stock ROM or on a certain
mouse's ROM (we don't say that name around these parts).
Not that I even contemplate going back to either of those ROMs,
just making sure that NRG knows that it's not a hardware issue.

Also, sometimes I forget about the problem and I try hanging up
from the BTooth headset. It doesn't, obviously, and after that I can't
hang up even by hitting the buttons on the phone; soft or hard buttons.
It will hang up on it's own but it takes at least 10 or 15 secs after that.

[savaytse66]

Originally Posted by DatBoiDame

One thing I do like about the 23127 build is that the text message menu is in the right order now!
New
Reply
Forward
Delete

LOL I got tired of accidentally deleting text messages.. Im still setting up and the build seems extremely stable & fast. 2 thumbs up from me so far!

I just flashed the March 12 ROM and I keep deleting text messages accidentally. The menu order is:

New
Delete
Reply
Forward

Is there any way to change this? This is the first time I flashed Energy ROM, and I have not followed this thread, but I did do a search to see if this is a common issue. Hopefully this isn't something that's been beaten to death or a Newbie question. If it is, my apologies.

[MisterTedster]

Originally Posted by madkoopa

I'm a noob, so my advice may not be as direct:

It sounds like the proximity sensor is on. Go to your CHTEditor settings and there may be a setting to turn the proximity sensor off. Or if you scroll to the right on your home screen, there may be a toggle switch button to turn it off or on with.

Thanks for that. I use spb mobile shell, so the proximity sensor wasnt accessible with sense "disabled" but it seemed that even though my settings indicated that it was "disabled", it was running in the back. All I had to do was enable and re-disable sense and it seems to have solved my problem.

[NRGZ28]

OKay... working on the bluetoth problem now.. got a scala rider headset here to test with