WM 6.5 Kitchen QVGA and VGA Developer Edition

[tdemeza]

Would anyone mind sharing a 6.5 Diamond Rom for testing? If it matters, I am on Alltel. I have been using/flashing custom Roms for a long time and tend to use Conflippers Roms as they are about as stable as you could want. I know the 6.5 Roms are not exactly ready, but I would be happy to help test. Cooking Roms is just not for me yet. But I really want to play with this thing

Thanks everyone!

[jdume]

Any one happen to know why I can't get my data connection to work I'm using the Conflipper Vogue kitchen that was for alltel I did not let customizations run and i installed DCD carrier cab for my carrier. Still got nothing! However I can still make and receive phone calls.

Hello,

i need your help

i have big problem with windows mobile 6.5
acutally i try windows mobile 6.1 21114 there are the same problem.

the problem is, after os-logo no calibration screen come.
big problems to call "welcome.lnk"
only whenn i insert in wrong path to welcome.lnk the today-screen display ???

do you know this bug ???

here is the rgu of the welcome-center, i think it's not compatible with m800 ???
is this welcome-center new in the 21xxx-builds ???

over one week and no succed with wm65.
at the moment the same problems with wm61 21115



REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:M SWelcomeCenter]
"0"="MSWelcomeCenter" ; class name
"1"="wcsan.exe" ; exe to launch
"2"=dword:1 ; perf hint (RAI_PERF_*)
"3"=dword:0 ; app type (?)
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CWelco meCenter]
"Disabled"=dword:0
[HKEY_CLASSES_ROOT\.wcml]
@="wcmlfile"
"Content Type"="text/html"
[HKEY_CLASSES_ROOT\wcmlfile\DefaultIcon]
@="browsres.dll,-6703"
[HKEY_CLASSES_ROOT\wcmlfile\Shell\Open\Command]
@="iexplore.exe file:%1"
[HKEY_CLASSES_ROOT\welcomecenterapp\DefaultIcon]
@="coreres.dll,-20797"
[HKEY_CLASSES_ROOT\welcomecenterapp\SelectIcon]
@="coreres.dll,-20798"
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Redirect"=":MSWELCOMECENTER"
[HKEY_LOCAL_MACHINE\System\WelcomeCenter]
"CmdLine"=""
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Group"=dword:1


hope you can help...

[tdemeza]

Originally Posted by jdume

Any one happen to know why I can't get my data connection to work I'm using the Conflipper Vogue kitchen that was for alltel I did not let customizations run and i installed DCD carrier cab for my carrier. Still got nothing! However I can still make and receive phone calls.

I know you may have tried this, but if not, try dialing *228 (SEND) for programming after you install your new Rom. It may just be that simple. I hope so

Good luck.

[jdume]

Originally Posted by tdemeza

I know you may have tried this, but if not, try dialing *228 (SEND) for programming after you install your new Rom. It may just be that simple. I hope so

Good luck.

Yup I tried that too. Still nothing. Gonna try to work on it more.

[sam7128]

Originally Posted by everal

Hello,

I'am a german rom-cooker for glofiish m800-device.
i work since over one week on windows mobile 6.5.
I'am not success today.

The Problem is:

- No Calibration (Welcome.lnk) is launched by initflashfiles.dat
but in the file the entry is included
the biggest problem, becouse the device is unusable
- The Startmenu is wrong, only a white screen open. (very small) no solution with gwes.exe from wm61 20924 sys.
- the grey taskbar on the today-screen

i have replaced gwes.exe from working windows mobile 6.1 sys 20924
i have changed shell.exe and shellres32.dll in shell-directory from sys
to change user.hv and default.hv from metadata
to delete user.hv and default.hv from metadata
to replace folder for shell
to replace folder for phone
to replace folder for redist.
to include wince.nls in sys-folder too

The wince.nls is in my xip (rom-directory) (my kitchen need the extracted version of xip.bin)

I don't know what the problem is.

I have ported XIP 21159 from Diamond, from TouchPro, from glofiish m700, from glofiish m500 and much more. I'am sure i use actually an VGA-XIP (from Diamond, 1.post in this Thread)
but i don't know which version this is (21139 or 21159 ???)

all the same problem.
i use my kitchen based on windows mobile 6.1 and included the g'reloc.exe from WM65 Kitchen (forwarder) and the wmreloc.exe.
since my kitchen is ready for wm65. all works great by compiling the new temp.dat (the flash-file for glofiish devices)

I read i must use the same sources for XIP and SYS !!!
But what are the same Sources ???

Can anyone send me an working 21159 XIP for VGA ???
When i try to port "Diamond Payload 21159" from XDA-Developers with Xipport and Xipporterex the xip is ok, but when i insert in my kitchen, the prog "buildos" stop their working, nothing happens in command-window.

So i'am very pleasent when you can send me an working source 21159 SYS for VGA and an working Source 21159 XIP for VGA...

I'am at the end...
I think WM'Reloc is not compatible with my device ???

Please help me for porting Windows Mobile 6.5

Thanks
Everal

I do not have VGA machine. But the latest working WM6.5 rom I use sys from Da_G beta 6 RK, which is very silimlar to conflipper beta 3. This sys is smaller and no tmail problem for my QVGA machine and it is VGA RK. And from Da_G kitchen, you can have both sys and xip which will be the same version.

http://forum.xda-developers.com/showthread.php?t=474406

For G'reloc, I did not use WM'Reloc as well becaseu I am not sure about it. I use the method that post here by convert all dll folder in BROWSINGCORE and browsingie to module and then do G'reloc, it will work fine. The 2nd method that I use which credit to my friend from PDAMobiz is by moving out shell folder (may be together with BROWSINGCORE folder) out from sys then do G'reloc after complete put them back and redo G'reloc again. By above method you can use original G'reloc without any problem.

[sam7128]

Originally Posted by everal

Hello,

i need your help

i have big problem with windows mobile 6.5
acutally i try windows mobile 6.1 21114 there are the same problem.

the problem is, after os-logo no calibration screen come.
big problems to call "welcome.lnk"
only whenn i insert in wrong path to welcome.lnk the today-screen display ???

do you know this bug ???

here is the rgu of the welcome-center, i think it's not compatible with m800 ???
is this welcome-center new in the 21xxx-builds ???

over one week and no succed with wm65.
at the moment the same problems with wm61 21115



REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:M SWelcomeCenter]
"0"="MSWelcomeCenter" ; class name
"1"="wcsan.exe" ; exe to launch
"2"=dword:1 ; perf hint (RAI_PERF_*)
"3"=dword:0 ; app type (?)
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CWelco meCenter]
"Disabled"=dword:0
[HKEY_CLASSES_ROOT\.wcml]
@="wcmlfile"
"Content Type"="text/html"
[HKEY_CLASSES_ROOT\wcmlfile\DefaultIcon]
@="browsres.dll,-6703"
[HKEY_CLASSES_ROOT\wcmlfile\Shell\Open\Command]
@="iexplore.exe file:%1"
[HKEY_CLASSES_ROOT\welcomecenterapp\DefaultIcon]
@="coreres.dll,-20797"
[HKEY_CLASSES_ROOT\welcomecenterapp\SelectIcon]
@="coreres.dll,-20798"
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Redirect"=":MSWELCOMECENTER"
[HKEY_LOCAL_MACHINE\System\WelcomeCenter]
"CmdLine"=""
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Group"=dword:1


hope you can help...

I had been there for a few days. After green WM6.5 logo and the ding sound, the touch screen does not work at all. It pop up the word to go to alinge screen but touch screen does not work. I have to go back to very clean rom, put in only required oem folders to build a new rom to get pass this stage. I still don't know why. All oems I use they work good in WM6.1 RK. Then I start to put in other oems one by one to get to the new rom I want. And I find out some oem, if I put it in this problem will come.

[dsi76]

I'm using DaG's Raphael 6.5 SYS as well as the Vogue ROM's QVGA (DPI96) SYS files to port to my Elfin. Everything seems to work decently. The two main problems I have are:

- Network icon shows no signal, but there really is a connection
- Can't change ringtones for the phone; it just changes back to the default ringtone in the dropdown menu after you select one

Any ideas?



Regarding the ringtones, I have the following:

\Windows\Rings (from my initflashfiles.dat):
- Ring-OldPhone.wma
- Ring-Organic.wma
- Ring-Standard2.wma

SYS\Phone_Redist_Lang0409 has (also under \Windows):
- Ring-Standard.wma

All 4 of these ringtones show up in the menu pulldown, but if you select one, it goes back to the default, "Ring-Standard".


EDIT: Fixed it.. had a badly ported XIP, such that the boot.rgu was missing the lsomacore.dll reference.

[J0KER]

Originally Posted by dsi76

All 4 of these ringtones show up in the menu pulldown, but if you select one, it goes back to the default, "Ring-Standard".

What happens if you browse to the files via File Explorer, tap and hold ("right click") one of them and select "Set As Ringtone"? That has worked for me.

[SOHKis]

if you need the xip for diamond you should be able to pull it from the reducedROM link i posted a few pages back (depending on how many posts per page you show)