Android For The Vogue Is Here!!!

[jim2561]

Originally Posted by Bermz

hey guys. like many others over here and on xda, I can't get the newest version of the SDK to install on my phone. I follow the instructions verbatim, yet during the installation I receive the following message...

Failed to mount SD card
/bin/sh: can't access tty; job control turned off.

And then NOTHING.

do u think the fact that I am using an 8gb SDHC have anything to do with it?

well first off, you shouldn't need to use any sdk anymore..just use the real thing. its on dzo's site here: http://it029000.massey.ac.nz/vogue/

under
Files:

Latest Version ( <- yes i really made this a link)

delete any and all files you can find that you have previously used with/for android, on or off the card.

what fs is your card using?

be sure that there are no files named data.anything or system.anythingelse.

then just do a fresh install from the latest version link.

the size of your card COULD do it..and I have had problems with mine in the past (6gb) that others didnt have, though I doubt that once you're above that threshold there are still yet other differences. if it works for me w/ my 6gb it should work for you with your 8gb

[njakobs]

Originally Posted by Bermz

do u think the fact that I am using an 8gb SDHC have anything to do with it?

Works fine for me with a 8gb sdhc.

[JM-PDA]

I've installed that latest version (android-24-10-08.zip) on to my Sprint HTC Touch.
It is running perfectly... except for one thing. It does not recognize the SD Card.

I have an SDHC 8Gb card. When I boot up, I go to Developer Tools and initiate "Media Scanner". A Window opens and says "Media Scanner started. scanning /sdcard" and just hangs there.

Questions:
1) How long does it take to scan an SD Card? 5 minutes? 1 hour?
2) Any ideas on how I can get it to read my SD Card?

Thanks!

[jim2561]

Originally Posted by JM-PDA

I've installed that latest version (android-24-10-08.zip) on to my Sprint HTC Touch.
It is running perfectly... except for one thing. It does not recognize the SD Card.

I have an SDHC 8Gb card. When I boot up, I go to Developer Tools and initiate "Media Scanner". A Window opens and says "Media Scanner started. scanning /sdcard" and just hangs there.

Questions:
1) How long does it take to scan an SD Card? 5 minutes? 1 hour?
2) Any ideas on how I can get it to read my SD Card?

Thanks!

sd support is really not implemented too well just yet. hang in there and I'm sure it will be pretty soon as I think its sort of high on the priority list. Right now it kind of depends. If your card is small, it should take less than 10 minutes, can't remember exactly how long it took w/ my 2gb but i think like 3 minutes. As for my 6gb, it never works so ya :S

[casualonejp]

I just downloaded the latest 28-10-2008.zip from dzo website and unzipped the files to /storage card/ and when I try to run haret it goes into an endless loop either saying "sd init retry | mmc0: data error (-110)" and just keeps going and going.

I did remove all other instances before placing the new files on the device as well. I am not sure if the default.txt file is correct. Here it is just in case:


Quote:
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
#
# The following kernel parameters are useful
# ppp.username - The username used to connect to the network when dialing #777
# ppp.password - The password used to connect to the network when dialing #777
# msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller
# pm.sleep_mode - The mode used when the phone is off
# 0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep,
# 3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt
# Default is 3, use 0 for best power savings
# board-htcvogue.panel_type - Panel type used to power the panel off and on
# 0=Don't power off the panel (Default)
# 1=Hitachi 2=Topoly 3=Samsung
#
set cmdline "ppp.username=mobile@jamamobile ppp.password=telecom"
# msm_sdcc.msmsdcc_fmax=32000000 pm.sleep_mode=0 board-htcvogue.panel_type=1
# fbcon=rotate:1
# console=ttyMSM0"
boot

Edit: I tried reinstalling the .cab installer and it works fine. I then removed the entire presence and installed the newest (28-10-200 version and it gets the same error again from above. Tried replacing zImage from the .cab installer with the new one and again same error but if I just use the one that came with the .cab then it works.?

[fredcatsmommy]

has anyone run into the situation that android boots up and after unlocking the screen, it is not responsive to touching the screen? I did not have this problem pre-official release.

[keenish27]

Hi,

I just used the 10-28 zip and installed android on my phone. Its the verizon vx6900. Everything seems to work fine except when i put it to sleep with the little red button it won't wake up. any ideas?

Edit: Its just when the screen goes to sleep period. I made a call and then the phone was unresponsive after the screen went to sleep.

Edit:... ok i have no sound...only when i'm on the phone....

[kevkranker]

The newest version 10-28 is working really well for me. It has been very stable. I haven't had to reboot once today. Great work guys!!!

[fireshaper]

Even with the newest release I still get sh: can't access tty; job control turned off. And then just Android power: wakeup messages.

I've tried putting all the files in the SD card's root and also just putting the system and data files in teh root and the rest in an Android folder with the same results. Any help?

[cjmedina]

i also download the newest one and works pretty good .very stable once you get a hang of how the buttons are mapped its very usable. i could not get it to work on my 8 gig sndisk card but ran perfect of the 512 one good jobs guys