Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS! - Page 297

**makkonen** · #**2961** (**permalink**) 06-20-2010, 05:33 AM

Did you say where exactly it freezes up? Right after 'loading linux' goes away? (Sorry, too lazy at 4:30am to go check.) If so, my strong suspicion would be that it lies in the mach_type/mtype definition, which is in the startup.txt. But you say you've checked that, so I'm sort of stumped, too. (Maybe try other startup.txts, even if you know they're wrong, to see what happens.)

I trust that if we kept at it, we could figure out what was wrong. Computing technology is still deterministic (...as I have to keep telling myself). But I also can totally understand throwing your hands up in frustration and giving up.

Edit: Yes. You did say. While I was writing. Even though it looks like I can't read, I swear I can.

4218kris · #**2962** (**permalink**) 06-20-2010, 07:05 AM

i still havent got the data working for cricket anyone have any it working?

88fingerslukee · #**2963** (**permalink**) 06-20-2010, 11:20 AM

Quote:

Originally Posted by makkonen

Did you say where exactly it freezes up? Right after 'loading linux' goes away? (Sorry, too lazy at 4:30am to go check.) If so, my strong suspicion would be that it lies in the mach_type/mtype definition, which is in the startup.txt. But you say you've checked that, so I'm sort of stumped, too. (Maybe try other startup.txts, even if you know they're wrong, to see what happens.)

I trust that if we kept at it, we could figure out what was wrong. Computing technology is still deterministic (...as I have to keep telling myself). But I also can totally understand throwing your hands up in frustration and giving up.

Edit: Yes. You did say. While I was writing. Even though it looks like I can't read, I swear I can.

Is there a possibility that his WinMo installation is messing with Haret? Perhaps something got "jack'd up!" and Haret doesn't know how to get beyond it? It's a long shot, but maybe a hard-reset?

What's funny is that I'm on Bell, in Vancouver, running SKI-ROM and can (and have been able to for about 3-4 months now) run Android no problem. I should drive over to HotSauce's house,show him my TP running Android and yell "neener neener!"

Anyway, I'm still fuzzy on HOW exactly haret works so I'm not sure if winmo even impacts it.

sfhub · #**2964** (**permalink**) 06-20-2010, 12:59 PM

Quote:

Originally Posted by HotSauce

This is f'ing stupid. Running haret STILL keeps freezing my phone. I'm using the latest AIO, I'm using the right startup.txt, and I've re-downloaded the AIO and re-tried many times. I'm going to backup my SD card, then put andboot back on and see if that works. If that doesn't, then **** it because I'm out of ideas.

Try creating a file earlyharetlog.txt in the same directory as haret.exe

haret.exe should then create haretlog.txt which possibly can shed more light on what is going on.

**arrrghhh** · #**2965** (**permalink**) 06-20-2010, 02:07 PM

Quote:

Originally Posted by HotSauce

The bar fills up full then boom, frozen.

That's almost certainly a startup.txt issue as others have pointed out...

With that said, I'm not aware of anything within WinMo that would prevent Android from booting. But there's a first time for everything... It's an extreme long-shot, but have you tried hard resetting the device so WinMo is wiped clean? Or flashed another ROM? I know it sounds stupid, but it's worth a shot. It would also rule that piece out

shiverz26 · #**2966** (**permalink**) 06-20-2010, 02:33 PM

what about formating the SD card?

EDIT** I went back and look at the responses to Hotsauce's posts and it was mentioned before to format or try a new SD card but he never acknowledged if he had done this responses to other suggestions are there but omits the SD card suggestion from what i can see, has this been tried? I apologize if i missed something.

hamagc · #**2967** (**permalink**) 06-20-2010, 08:02 PM

new system uploaded today with hw3d built in and voice search.

HotSauce · #**2968** (**permalink**) 06-20-2010, 08:35 PM

Quote:

Originally Posted by makkonen

Did you say where exactly it freezes up? Right after 'loading linux' goes away? (Sorry, too lazy at 4:30am to go check.) If so, my strong suspicion would be that it lies in the mach_type/mtype definition, which is in the startup.txt. But you say you've checked that, so I'm sort of stumped, too. (Maybe try other startup.txts, even if you know they're wrong, to see what happens.)

I trust that if we kept at it, we could figure out what was wrong. Computing technology is still deterministic (...as I have to keep telling myself). But I also can totally understand throwing your hands up in frustration and giving up.

Edit: Yes. You did say. While I was writing. Even though it looks like I can't read, I swear I can.

Quote:

Originally Posted by 88fingerslukee

Is there a possibility that his WinMo installation is messing with Haret? Perhaps something got "jack'd up!" and Haret doesn't know how to get beyond it? It's a long shot, but maybe a hard-reset?

What's funny is that I'm on Bell, in Vancouver, running SKI-ROM and can (and have been able to for about 3-4 months now) run Android no problem. I should drive over to HotSauce's house,show him my TP running Android and yell "neener neener!"

Anyway, I'm still fuzzy on HOW exactly haret works so I'm not sure if winmo even impacts it.

Quote:

Originally Posted by sfhub

Try creating a file earlyharetlog.txt in the same directory as haret.exe

haret.exe should then create haretlog.txt which possibly can shed more light on what is going on.

Quote:

Originally Posted by arrrghhh

That's almost certainly a startup.txt issue as others have pointed out...

With that said, I'm not aware of anything within WinMo that would prevent Android from booting. But there's a first time for everything... It's an extreme long-shot, but have you tried hard resetting the device so WinMo is wiped clean? Or flashed another ROM? I know it sounds stupid, but it's worth a shot. It would also rule that piece out

Quote:

Originally Posted by shiverz26

what about formating the SD card?

EDIT** I went back and look at the responses to Hotsauce's posts and it was mentioned before to format or try a new SD card but he never acknowledged if he had done this responses to other suggestions are there but omits the SD card suggestion from what i can see, has this been tried? I apologize if i missed something.

Hey guys, thanks for the responses. I formatted my SD card yesterday, ran haret.exe and it worked! But now I'm trying to run it again today and it's still freezing! So I'm stumped. But I'm not quite prepared to do a hard reset or flash a new ROM just to see if Android works. Could it still be the startup.txt if it haret works one time, but keeps freezing after? I have a RAPH 800, and I'm using the one from the RAPH 800, startup config folder.

If anyone has any other startup.txt files for the RAPH 800, I would like to try them. I'll also post my startup.txt for you guys to look at.

And I'll make that earlyharetlog.txt file and post the log file.