|ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors

[willyjay]

Originally Posted by sandfox24

For MMS to work - try the instructions on this post
Make sure you read the part in red on top, then scroll down to your carrier
http://forum.ppcgeeks.com/showpost.p...ostcount=18943

If you've already installed an arcsoft mms cab, can you simply remove it and try this?? I'll give that a try in the morning...Thanks!

Originally Posted by proxhack

Or you can just go to this post, install these 2 cabs and you are done.

http://forum.ppcgeeks.com/showpost.p...ostcount=21328

Originally Posted by sandfox24

Is that just for sprint?

Must be, seeing as it uses Flyers sprint cab.

[proxhack]

Originally Posted by willyjay

If you've already installed an arcsoft mms cab, can you simply remove it and try this?? I'll give that a try in the morning...Thanks!





Must be, seeing as it uses Flyers sprint cab.

Here is the us cellular but first use zenyee's cab

[netengineer]

Maybe someone can help me with this really annoying issue…. Well, in a nut shell it is hit or miss when trying to answer an incoming call. I am at least able to hang up on a call with my Bluetooth now though. Lol

I made changes to fix the Bluetooth issue, I was able to answer the call the first time one comes in but after that I can’t answer a call. I can’t even answer it by using the slider on the phone’s screen. It looks like it answers but all it does is silence the ringer.

This what I did:

1. I set up my carrier provisioning to Sprint and soft reseted my phone, then I had to go to settings, connections then connections again. From there, I selected "Advanced" selected "select networks" and set both "programs that..." options to "Sprint”

2. I followed the instructions to update the Microsoft Voice Command with the 6.5.x patch.
http://forum.ppcgeeks.com/showthread.php?t=100022

[sandfox24]

Originally Posted by willyjay

If you've already installed an arcsoft mms cab, can you simply remove it and try this?? I'll give that a try in the morning...Thanks!

Not sure, definitely try it. If it doesn't work start fresh and it will.

Originally Posted by sandfox24

Is that just for sprint?

Originally Posted by willyjay

Must be, seeing as it uses Flyers sprint cab.

Ya, i was surprised to see a 6MB mms fix.

For 6MB you can have my bootscreen
http://forum.ppcgeeks.com/showpost.p...ostcount=18969

[proxhack]

Originally Posted by sandfox24

Not sure, definitely try it. If it doesn't work start fresh and it will.







Ya, i was surprised to see a 6MB mms fix.

For 6MB you can have my bootscreen
http://forum.ppcgeeks.com/showpost.p...ostcount=18969

I posted the us cellular too.

[sandfox24]

Originally Posted by netengineer

Maybe someone can help me with this really annoying issue…. Well, in a nut shell it is hit or miss when trying to answer an incoming call. I am at least able to hang up on a call with my Bluetooth now though. Lol

I made changes to fix the Bluetooth issue, I was able to answer the call the first time one comes in but after that I can’t answer a call. I can’t even answer it by using the slider on the phone’s screen. It looks like it answers but all it does is silence the ringer.

This what I did:

1. I set up my carrier provisioning to Sprint and soft reseted my phone, then I had to go to settings, connections then connections again. From there, I selected "Advanced" selected "select networks" and set both "programs that..." options to "Sprint”

2. I followed the instructions to update the Microsoft Voice Command with the 6.5.x patch.
http://forum.ppcgeeks.com/showthread.php?t=100022

Try checking this reg setting..


[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings], make sure SuspendResume is set to #777 (not anything containing GPRS).

[mkappeli]

Originally Posted by Maan76

the Ideal pp size for the last release is16 Mb , I have benchmarked the ROM with 22 Mb , 20 , 18 , 16 and even 12 ...........the highest speed and read write processing is via setting up the pp to 16 .
I did a comparison of different NRG ROMs with different PP as well as the 16 jul DINIK ROM for 22 vs 16 Mb PP.


the net result is for DINIK glass ENERGY 21911 ideal pp is16 Mb.
good luck

What about 23xxx builds? anyone benchmark on that... Very curious because I am very happy with the new 23673 dinik build. By far the fastest yet and IMHO extend the life of the phone for me. Never really played with the PP because I just trusted that NRG was configuring for best performance.. but definitly been curious as all of our needs are different.

[Maan76]

Originally Posted by mkappeli

What about 23xxx builds? anyone benchmark on that... Very curious because I am very happy with the new 23673 dinik build. By far the fastest yet and IMHO extend the life of the phone for me. Never really played with the PP because I just trusted that NRG was configuring for best performance.. but definitly been curious as all of our needs are different.

honestly ...I dont work with 6.5.xx I like stability and speed , yes Ive heared the last build NRG has used was fast , but it is 6.5.xx.
ask me any tweaking details for 6.5 and you will have an answer.
NRG set up the PP so the phone never freezes no matter how many apps you run together and his configuration support multitasking function of the device, but as you know for DINIK ENERGY such high quality graphics take memory , so what I do , I steal 6 ,sometimes 8 MB (sometimes even more )from the PP towards the RAM and then benchmark and see the speed , and this absolutely gives me better performance.

hit thanx if this helps

[netengineer]

Originally Posted by sandfox24

Try checking this reg setting..


[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings], make sure SuspendResume is set to #777 (not anything containing GPRS).

Mine was set to "GPRS" so I changed it to #777, I hope that works. I will test it in the morning and let you know. Thanks for the help.

[sandfox24]

Originally Posted by netengineer

Mine was set to "GPRS" so I changed it to #777, I hope that works. I will test it in the morning and let you know. Thanks for the help.

That was definitely the problem. Could have happened if you used Advanced Config in the tools folder.