WM 6.5 Kitchen QVGA and VGA Developer Edition - Page 751

ali3nfr3ak · #**7501** (**permalink**) 09-01-2009, 02:50 AM

im sure this has prolly been asked b4 and sorry if it has, im trying to take the start menu order of 23037 and import it to 23016, but im not having much luck, t i have tried is exporting the reg entries found hklm\security\shell\start and adding them to my custom reg entries but that doesnt seem to work,also i have tried just swapping the mixinit_startmenu.provxml that does not seem to work either, does anyone have an idea which rgu/provxml/dll controls the start menu order please?

Nagrom Nniuq · #**7502** (**permalink**) 09-01-2009, 03:24 AM

Can someone please give me some guidance? I am using the Vogue 6.5 Kitchen from the first post of this thread. I then removed all the SYS files and replaced them with the new 23037 ones from http://ppcgeeks.com/forums/showthread.php?t=77176. I then ran BuildOS which completed and I had the ROM. However, when I flash it i have 21139 on my phone and a bunch of OEM files installed that I did not select in BuildOS.

Forgive my ignorance, but I have been reading and trying to build a 6.5 23037 ROM for the Vogue for the last week (spending an hour or two a day and trying to us PPCK and this kitchen and Ervius Kitchen) and have had 0 luck.

Please tell me what I am doing wrong, missing, or need to change.

Quote:

Originally Posted by m4f1050

In a nutshell:

1.You don't have to remove old files from ppckitchen unless it's the same build.
2.You have to inject the XIP file (my mistake when I 1st tried it too) using WinRAR to the ROM folder in BuildOS/Kitchens/[platform]_Common.rar In your case Vogue_Common.rar
3.You have to add under BuildOS/Projects/Groups/BuildBases the new build. You can copy/paste WM6.5_96DPI_QVGA_21501_0409.txt to WM6.5_96DPI_QVGA_23037.txt and edit all 3 21501 on the new file to 23037
4.Edit BuildOS/Projects/Groups/DeviceBases/Vogue_WM6.1.txt and add the new build. You can copy/paste the last line under [BaseGroup] and change WM6.5_21501 to WM6.5_23037 and Vogue_21501.enc.bin to Vogue_23037_xip.bin

I'm not using PPCK though. As I said, I'm using the kitchen from the beginning of this thread.

Quote:

Originally Posted by ali3nfr3ak

check this post out

http://ppcgeeks.com/forums/showpost....9&postcount=76

Again, not using PPCK. I am using your files though Ali3n. Thanks!

Quote:

Originally Posted by swampy395

Hi mate
when HTCROMTool runs ckeck that the os-new.nb is the one from the correct kitchen,
example if you have 2 kitchens on your pc, sometimes it will build the rom in the wrong kitchen,
click the button "OS ..." and check it's the correct kitchen folder, Also if you put your mouse over the os-new.nb file the date and time should be within 2-3 mins of compleation,

I'm not sure what you mean by this. I don't run any HTCROMTool. Here is what I did exactly:

I downloaded the Vogue kitchen from the first post of this thread. I extracted the files to a folder. I deleted everything in the SYS folder and then placed Ali3n's 23037 files in the SYS folder. I then ran the BuildOS and unselected everything listed (I want a clean ROM to test from). I then clicked Build and it worked but the RUU I get is no good.

cac2us · #**7503** (**permalink**) 09-01-2009, 04:04 AM

Have you considered ppckitchen, it works for me.It just takes a little time to process the Rom, but the results are perfect.

**joojoobee666** · #**7504** (**permalink**) 09-01-2009, 07:54 AM

Quote:

Originally Posted by Nagrom Nniuq

Can someone please give me some guidance? I am using the Vogue 6.5 Kitchen from the first post of this thread. I then removed all the SYS files and replaced them with the new 23037 ones from http://ppcgeeks.com/forums/showthread.php?t=77176. I then ran BuildOS which completed and I had the ROM. However, when I flash it i have 21139 on my phone and a bunch of OEM files installed that I did not select in BuildOS.

Forgive my ignorance, but I have been reading and trying to build a 6.5 23037 ROM for the Vogue for the last week (spending an hour or two a day and trying to us PPCK and this kitchen and Ervius Kitchen) and have had 0 luck...

Ok, sounds like you didn't replace any of the XIP (MSXIPKernel) related files. I am pulling it down to take a look at it to see if I cannfind what you missed, but I would bet that there may be a better kitchen for cooking for the Vogue than this Kitchen (i.e. Visual Kitchen or PPCKitchen).

UPDATE: Looks like your going to need to manually insert the XIP into the payload in order for the version to show properly. Frankly, I am amazed it booted at all for you

ahmedfikry · #**7505** (**permalink**) 09-01-2009, 09:45 AM

23041 posted on XDA here id download link:

http://rapidshare.com/files/27421623...XIP_B23041.rar

**joojoobee666** · #**7506** (**permalink**) 09-01-2009, 09:54 AM

Quote:

Originally Posted by ahmedfikry

23041 posted on XDA here id download link:

http://rapidshare.com/files/27421623...XIP_B23041.rar

Already found and sorting.

No 96DPI though, so I working to see what's changed on the 192. Quite a few packages are 23039 now...

m4f1050 · #**7507** (**permalink**) 09-01-2009, 10:07 AM

jjb is the 23405 an unofficial build number or is it something leaked out like 23037?

Also, what's with the SMS/MMS (mail) dragging and slowing down the phone? I noticed this yesterday when I took my Touch Pro out to see the world....hehe

Oh, and why do I get a scroll bar on the dialer when there is nothing to scroll about... I am guessing the fatter bottom curtain/softkeys... Can that be addressed via registry edition?

**joojoobee666** · #**7508** (**permalink**) 09-01-2009, 10:13 AM

Quote:

Originally Posted by m4f1050

jjb is the 23405 an unofficial build number or is it something leaked out like 23037?

They are all leaked out. As far as the number goes, that just has to do with the branch of code that the leak was from.

m4f1050 · #**7509** (**permalink**) 09-01-2009, 10:24 AM

Quote:

Originally Posted by joojoobee666

They are all leaked out. As far as the number goes, that just has to do with the branch of code that the leak was from.

I see. It works great for me, besides the SMS/MMS dragging and the scroll bars on the dialer everything works perfect. I got the dialer to work by not installing one, but would like to have a white skin for it. I even got the volume on my InCalls to work by not installing the volume control and for system volume I installed SetVolume 0.6.1 (will provide link if you don't know how to search... LOL)

ahmedfikry · #**7510** (**permalink**) 09-01-2009, 10:38 AM

Quote:

Originally Posted by m4f1050

I even got the volume on my InCalls to work by not installing the volume control

can you please give me more instructions about how to do this?

how to "not install volume control"?

i would like my In-call voulme to go up & down from side buttons without having to drop the taskbar & do it on screen too

Thanks