nueSPL-2.47

[hindjew]

Originally Posted by scutler

I have tried to get this radio installed several times and was not able to. I downloaded the 2.47 unlocker, followed the instructions and on the first attempt it worked. I also downloaded the relocker and it returned the bootloader back to the original and left the newly installed radio alone. My thanks to No2Chem.

Looks like you have a Sprint Mogul. Just go to this thread, download the file and run it. Don't worry about unlocking your device. This will upgrade your Radio and get you WM6.1. This is the newest Sprint ROM.

AFTER YOU UPGRADE YOUR DEVICE WITH THE ABOVE FILE:
Now if you see you have a need to run a custom rom. (ie No2Chem's great ROMS), then you will need this SPL (to unlock your device). Go to the first page of this thread and read his DETAILED instructions on how to unlock the device.

[s4n3_0n3]

Originally Posted by no2chem

nueSPL-2.47 will update your device to the latest HardSPL. This SPL is NOT MFG. This SPL update no longer requires activesync, and should reduce problems for vista users. It can even be used by users with MacOS or Linux. You must have a microSD card (included with the phone) to use this method. Credit goes to Olipro for fixing my hardspl.

This SPL is not necessarily better than Olipro-2.40, however it is off a newer version of the SPL, Olipro-2.40 is from a SPL in September, this one is from a SPL in Feb. Because it is not MFG, it lacks some commands in bootloader.

DO NOT USE with a NON GPS RADIO (2.xx). Only use with GPS RADIOS (3.xx). A version check will be added soon.

To use, you need to copy the SPL update to your device and run it. It is intended to be run from the device, not the computer. Please see the included PDF instructions for complete details, and be sure to READ them before running the update.

Thanks to the testers - colonel00, astainhellbring, lennysh and mromblad for helping test and diagnose problems. Thanks to cmonex and olipro for advice and direction and fixing the SPL. Thanks to pof for JumpSPL.

Find the spl here:
ftp://up.ppcgeeks.com/Titan/Users/No...ueSPL-2.47.rar

you just helped me out alot with this app loveing the work keep it up no2chem

[s4n3_0n3]

what roms could you flash to with this i keep getting stuck at the htc screen with all the custume roms

[Athasian]

I've personally flashed 2 no2chem 2.2 previews (5 and 7) and the unofficial official sprint rom. For the no2chem ones, I just had to pull the battery at first boot.

[s4n3_0n3]

how come i cant get the 5069k to work with this spl

[s4n3_0n3]

never mind i figured it out i just had to pull out the battery for a little bit then put it back in and the 5069k loaded up

if it wasnt for no2chem i would of never been able to flash to any of his roms

[Robtao]

Originally Posted by lafester

its fine to use this to unlock and flash to a gps rom from a non gps rom.
you cannot keep or flash a non gps rom once you have unlocked AND you cannot relock and flash back to a non gps rom.

1.xx (non gps) radios are not compatible with this bootloader.
once you flash a 3.xx radio you cannot flash back to a 1.xx radio even if you relock to a stock bootloader without risking a brick (not 100% but risky).

So from a Non-GPS stock radio and ROM, the following is possible all performed without a PC from a properly prepped SD card?

1. Flash the SPL-2.47 by running the .exe from anywhere on the device or card(?).
2. Flash an updated 3.xx radio (is it necessary to avoid trying to operate the device before the radio update?) as a TITAIMG.nbh file in root of card. (Not sure if this is essential or just recommended. Is the brick risk only if downgrading?)
3. Flash to whatever GPS ROM floats your boat as a TITAIMG.nbh file in root of card.

Would appreciate any corrections, clarification, or stamp of approval.

At any rate, this whole proceedure has advanced to a state of simplicity and coolness that boggles the mind!

No2Chem: Thanks for what you have done and are continuing to do. Truly impressive!

[PapstDFrisco]

Hi All,
!st Post - been doing a lot of reading on all this upgrade rom stuff. Not sure that these questions belong in this thread - but it seems like a reasonable place to me - so here goes.

My question(s) from this thread is based on this statement:

************************************************** **********
DO NOT USE with a NON GPS RADIO (2.xx). Only use with GPS RADIOS (3.xx). A version check will be added soon
************************************************** **********

Are these radio or rom versions? What about pre 2.xx on a VZW xv600 - mine shows 1.30.60 for the radio and 2.09.605.8 for rom? Both of these are stock from what I can tell and Verizon shows now current updates on their support pages.

It seems there are so many variations and variables that it hard for a noob, technical as I may be, to figure out which is the correct path and sequence for the greatest chance of success.

So, from my stock xv6800 via activesync 4.5 connection:
1) Run Hard-SPL-MFG ver 2.4 (alt: titan_SPL_2.4-olipro)
2) Run Titan_Radio_ROM_3.42.30
3) Run a VZW custom rom ruu_signed.nbh (like NO2Chem's nueROM v2.1 build 5069-k)
4) Remove battery and re-boot.

No for some more questions: I've also come across TitanUnlocker.exe from olipro I think, Is this the same or does it basically do the same thing as the Hard-SPL?

I've also seem some threads that recommend running a dcd Verizon Carrier 20080706.cab - does this need to be done? What will it do? Pro's? Con's?

Also, through all this upgrading stuff, what happens to the Microsoft programs - that's not very clear to me either? I have been using wireless sync to Outlook - will I be able to continue with this? Do the custom roms suppport the office tools? Do you have to do the OfficeMobile_Licensed_0409_US.msi to patch it? Are there any licensing issues/problems associated - Microsoft seem to be getting more picky my the day.
So, what's the advice typically given or alternatives that work equivalently?

Thanks so much to all those who have contributed their insights so far in so so many threads. Especially No2Chem, olipro, ImCoKeMaN, dishe, quanumforce1, & cornelius2. Also thanks to those who have created roms - you've given me many choices to decide upon - but what glorious frustration.

BTW - anyone done a utube of this upgrade process on a xv6800? Guess I'll go do some more searching....

Thanks in advance for your responses to my noob questions. (whew - more than I expected to write)

[iceblue]

Great work, was not expecting this.

[s4n3_0n3]

Originally Posted by iceblue

Great work, was not expecting this.

me nether no2 really knows what hes doing all my props go to him