Telecom NZ - Upgrade Issues (and fixs)

njakobs · #1 (**permalink**) 04-29-2008, 01:27 AM

Hi wondering if anyone has any suggestions on how to resolve my problem.

I am on 'Telecom' in New Zealand which may be the cause of the problem. I upgraded as directed using 2.31 unlocker and rev and gps for Alltel. Then JD's test2.1 gps rom.

I did not let the customization run for the Alltel rom, but did for JD's.

For about 12 hours everything ran perfectly. Then the internet just stopped working. Phone and sms work perfect, just no data connection.

On my network there is a user name and password for access which I have entered in.

I don't really wont to go back to square one as I don't think that is the problem.

Cheers

Nigel

PapaDocta · #2 (**permalink**) 04-29-2008, 04:06 AM

enter the ESPT and check the Security entry ( using ##778 and you will need to know your 778 code try GetSPC) ... that happened to me a few times due to the settings in the security entry which keeps changing back to alltel ... even i didn't let the customization run

njakobs · #3 (**permalink**) 04-29-2008, 06:36 AM

Thanks, will give that a try. Not sure what any of it meant but I am sure I can find it on this awesome site.

Cheers

PapaDocta · #4 (**permalink**) 04-29-2008, 07:15 AM

on the dial pad dial ##778 and hit send it will open up a menu.. choose edit and enter your MSL number (look here for how to get MSL # http://forum.ppcgeeks.com/showpost.p...96&postcount=4) on the left side you will see View info click on and a menu will expand.. choose Security and look at the values there. replace them with your own..

hope this help

**wldthng842** · #5 (**permalink**) 04-29-2008, 02:45 PM

I would suggest deleting the username and password that you entered. I think this can make the internet not work anymore. usually those settings are saved internally to the device and should not be altered. Try removing them and see if the net comes back.

njakobs · #6 (**permalink**) 04-29-2008, 07:06 PM

Quote:

Originally Posted by wldthng842

I would suggest deleting the username and password that you entered. I think this can make the internet not work anymore. usually those settings are saved internally to the device and should not be altered. Try removing them and see if the net comes back.

Thanks, I tried that and a screen pops up asking for user name and password.

Quote:

Originally Posted by PapaDocta

on the dial pad dial ##778 and hit send it will open up a menu.. choose edit and enter your MSL number (look here for how to get MSL # http://forum.ppcgeeks.com/showpost.p...96&postcount=4) on the left side you will see View info click on and a menu will expand.. choose Security and look at the values there. replace them with your own..

hope this help

I have EPST working and can view values, I can't see any security settings?

I can't get into the edit mode so maybe I will see more options there. I have downloaded and used GetSPC and followed all the instructions excatly and the code it gives me is not accepted by EPST to unlock it.

Going to see if my provider can give me my MSL to unlock EPST.

Thanks for the ideas and suggestions guys

**wldthng842** · #7 (**permalink**) 04-29-2008, 09:23 PM

Quote:

Originally Posted by njakobs

Thanks, I tried that and a screen pops up asking for user name and password.

I have EPST working and can view values, I can't see any security settings?

I can't get into the edit mode so maybe I will see more options there. I have downloaded and used GetSPC and followed all the instructions excatly and the code it gives me is not accepted by EPST to unlock it.

Going to see if my provider can give me my MSL to unlock EPST.

Thanks for the ideas and suggestions guys =D>

Sorry I couldn't be more help. That is what fixed mine, or at least it worked when I left them blank.

aikidoka · #8 (**permalink**) 04-30-2008, 08:52 PM

Quote:

Originally Posted by wldthng842

I would suggest deleting the username and password that you entered. I think this can make the internet not work anymore. usually those settings are saved internally to the device and should not be altered. Try removing them and see if the net comes back.

When I go to security I have:

HDR AN Auth User Id(LONG)

-That has ****@hcm.sprintpcs.com

HDR AN Auth Password(LONG)

-That has a bunch of symbols

PPP USER ID

-blank

PPP PASSWORD

-blank

Are my settings correct? I havent entered passwords, didnt let alltel customizations run and using JD's test ROM on top of that. I havent had any problems accessing the internet, I'm just not sure I have rev A speeds yet.

ginnie · #9 (**permalink**) 04-30-2008, 09:04 PM

OK, looks like we need to find somebody who hasn't upgraded their OKTA touch and find out what their settings are.

It could be that this radio just isn't compatible with our EVDO network, in that case we could probably go back to the old radio by flashing the sprint factory ROM (containing the old radio) and then the TNZ dumped OS rom.

I'll wait a while and see if it can be fixed first though.

bungeeman · #10 (**permalink**) 04-30-2008, 10:24 PM

Hi Guys,

I checked it on a friend's phone:
36B107XX@evdo.jamamobile.co.nz
410aa09bb67XXXXXX
mobile@jamamobile
telecom

I changed the user and pass (x) above.

So it looks like everybody has his own username = device serial and his own password.

I will verifiy the setting on another fried's phone to see if the password is the same, but I cant believe that this will be the case.

Cheers
Enno