Any good sites for docks and accessories yet?

[BigDiesel07]

Originally Posted by 1999TL

You've got a point. If I'm working out, I should just use the stock case. Post some pics when you get your case. It's a nice case. Nicest case I've seen.

I just found a great list of Touch Pro/Fuze accerssorys... Go here to check it out... It includes Cases, BT headsets, Charging solutions, and wired solutions.. Also, it includes a review of every item listed..

[[sammich]]

Originally Posted by BigDiesel07

I just found a great list of Touch Pro/Fuze accerssorys... Go here to check it out... It includes Cases, BT headsets, Charging solutions, and wired solutions.. Also, it includes a review of every item listed..

Thanks!

I'm liking that emergency charger alot...

[jimmyz]

Originally Posted by 1999TL

I think you should request the case 1 cm wider. I do find the case is too tight. I had to stretch it out using my mogul, but it seems to tighten back up. IT's actually getting better now, but specifying 1 cm thicker would be better.
I used the specs from here: http://forum.ppcgeeks.com/showthread.php?t=42394
10.1L x 5.2W x 1.8D Also, I'd get one side lower like a member here photoshopped.
Did they get back to you on the red stitching?

Hi - I got my case from EaseCase and can confirm that it is WAY too tight (I used the measurements above)- I can't get the phone out! Its so tight that shoving the phone in depresses the power button. Its a real shame considering how nice the case is!

[micro254]

thanks for the link bd

[skimco]

just checking to make sure...... no one has a link to anyone that has the video out cable for the touch pro right??? still on back order from expansys

[mp1]

Originally Posted by jimmyz

Hi - I got my case from EaseCase and can confirm that it is WAY too tight (I used the measurements above)- I can't get the phone out! Its so tight that shoving the phone in depresses the power button. Its a real shame considering how nice the case is!

I want to order this case; exactly which dimension is too small? Could you post a pic?

[jimmyz]

Originally Posted by mp1

I want to order this case; exactly which dimension is too small? Could you post a pic?

I will post pics later- the case is definitely too small but I realize that when I measure my touch pro its longest dimension is actually 10.6 cm NOT 10.1- this is probably the biggest problem and is my fault- should have measured it myself!

[Edwood]

Originally Posted by jimmyz

Hi - I got my case from EaseCase and can confirm that it is WAY too tight (I used the measurements above)- I can't get the phone out! Its so tight that shoving the phone in depresses the power button. Its a real shame considering how nice the case is!

I don't think they followed my measurements. I think they just used the GSM Touch Pro's measurements, which is slightly smaller than the CDMA Sprint one. Because mine has the lower left side, I don't have problems with the power button being depressed because it's exposed, and it's a little easier to remove since there is less squeezing.

I've been stretching mine out with putting in larger stuff in it, and it fits like a glove now. I'll keep stretching it. Fortunately, leather does break in, so keep stretching, it should get better. Leather will stetch and stay that way. But it does take some time. It will make a for a perfect fit and the phone won't fall out on it's own.

Here's pics of mine. BTW, I'm the one that Photoshopped the Easecase pics as instructions for it's construction.













I normally have my Touch Pro in there face down (towards belt clip side) with the power button showing, I have it flipped the other way to show how I leave it in there when tethering, showing the EXT USB port exposed enough to be able to have something plugged in while in the case.

In short, this Easecase is simply THE best leather pda phone case I've ever owned. Only one that comes close are Vaja cases which come in at 3-5 times the price, and are not even close to being as custom fitted as thing one.

As Much as I'd like a little bit looser fit, I prefer a slightly tighter fit over one that is so loose, the the phone will just fall out if you tip it over. In hindsight, I'd give them a measurement of maybe a half a cm or up to a cm larger in every dimension.

Perhaps there could be a separate Leather Fetish Thread instead of posts of fine leather cases getting lost in this overly general accessories thread.

-Ed

[[sammich]]

Originally Posted by Edwood

I don't think they followed my measurements. I think they just used the GSM Touch Pro's measurements, which is slightly smaller than the CDMA Sprint one. Because mine has the lower left side, I don't have problems with the power button being depressed because it's exposed, and it's a little easier to remove since there is less squeezing.

I've been stretching mine out with putting in larger stuff in it, and it fits like a glove now. I'll keep stretching it. Fortunately, leather does break in, so keep stretching, it should get better. Leather will stetch and stay that way. But it does take some time. It will make a for a perfect fit and the phone won't fall out on it's own.

Here's pics of mine. BTW, I'm the one that Photoshopped the Easecase pics as instructions for it's construction.


I normally have my Touch Pro in there face down (towards belt clip side) with the power button showing, I have it flipped the other way to show how I leave it in there when tethering, showing the EXT USB port exposed enough to be able to have something plugged in while in the case.

In short, this Easecase is simply THE best leather pda phone case I've ever owned. Only one that comes close are Vaja cases which come in at 3-5 times the price, and are not even close to being as custom fitted as thing one.

As Much as I'd like a little bit looser fit, I prefer a slightly tighter fit over one that is so loose, the the phone will just fall out if you tip it over. In hindsight, I'd give them a measurement of maybe a half a cm or up to a cm larger in every dimension.

Perhaps there could be a separate Leather Fetish Thread instead of posts of fine leather cases getting lost in this overly general accessories thread.

-Ed

I'm going to be ordering my EaseCase soon. Same setup as you except with red stitching and red suede interior.

I think I might leave the leather though, because i don't use the USB cable while my phone is charging. Also, what is with the hole on the bottom?

Thanks for the pictures

[Edwood]

Originally Posted by saumaun

I'm going to be ordering my EaseCase soon. Same setup as you except with red stitching and red suede interior.

I think I might leave the leather though, because i don't use the USB cable while my phone is charging. Also, what is with the hole on the bottom?

Thanks for the pictures

The hole in the bottom is for being able to easily push the phone out of the case with your finger and take it out one handed. That's part of why I don't have problems with the tight fit right now. If you don't have the lowered side like I do, you'll absolutely need the bottom "push" hole. It will be very difficult to remove from the case otherwise, even with a looser fit.

As for the lowered side, I often use my Touch Pro tethered with my Tablet PC on the go. I use a compact retractable USB cable, so it allows me to be able to walk around with my Tablet PC in my hands, with the thing USB cable connected to my Touch Pro which is on my belt. I'm right handed so, I usually hold my Tablet PC in my left hand, so the lowered side is facing front, when I wear the case on my left side of my belt. Geeky and practical.

-Ed