|
|
08-11-2010, 09:03 PM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
Quote:
This cab is for the "SetCpuSpeed1.0d" cab solution... Also made the "phoneSleep" reg setting cab for SOD on calls, into a cab... So far this cab is for the "SetCpuSpeed1.0d" cab solution... unless you need it for the "script" solutions.. Also delay startup in another cab. This cab is for either solutions... You can Install any of these cabs AFTER installation of either cab solutions... The "SetCpuSpeed1.0d" cab is an app type solution, which in theory is supposed to be better than the early "Script" base solutions.. BUT it did not hold the setting solid enough for some users so that is why the "low" polling time is needed/used for them, as lowering gives less chance for the OS to reset speed & freeze at high overclock. It is common consensus (almost) that the script based solutions run more solid/smoother for some, soo.. Of the "script" solutions, I recommend for TP2, the latest "OC_ Auto_v4.21.cab" here: http://forum.ppcgeeks.com/showpost.p...&postcount=281 It has interface and simple to install/use. All that is needed is make shure you have latest netripper Msm7k cab installed and of course mortscript. For me it worked better than "SetCpuSpeed1.0d" cab, but with so many variables, each user will have different results. EDIT: FOR latest iwfratz OCT app, which has dynamic overclock, GO HERE: http://forum.xda-developers.com/show...&postcount=162 EDIT: For latest "setcpuspeed 1d cab" and good info, GO HERE: http://forum.ppcgeeks.com/showpost.p...&postcount=375 EDIT: THINGS TO LOOK FOR in speed limits: look to see if the "Msm7kcpu" app blinks steady. look to see if you can quikly swipe pictures in sense tab without lag. look to see if unit freeze while using keyboard on texting or Opera posting.
__________________
Last edited by Maxx134; 08-17-2010 at 11:41 PM. Reason: update 
|
| This post has been thanked 3 times. |
|
08-12-2010, 04:55 PM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
After last night, I realized that checktime = polling time and 20-30 is waaaay too low, it seemed like I was burning battery by the second!
|
|
08-12-2010, 09:49 PM
|
||||
|
||||
Re: Overclock TP2 in WM?
I don't know if anyone has had this problem... throughout the day the phone gets slower even at 787.2MHz and this makes sense... so I ran Ram Sweeper and then the phone froze with the backlight off and it would not come on. My phone has done this many times before (the black screen)... especially when it boot on when is installing a large file and the screen the screens goes black, it sometimes takes a bit before it comes back on but this time I had to reset the phone (the physical reset button w/ the stylus). Does Ram Sweeper or similar programs stop or kill something that the OC_auto is doing and therefore causing the phone to freeze?
__________________
************************************************** *****************************************
"It is not about personal religious views/opinions... it is about Truth being absolute and not relative. There can only be ONE TRUTH and ONE WAY - Jesus is it!"
|
|
08-12-2010, 09:53 PM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
I noticed that when I ran memaid and it would crash/lockup if I had "close running programs", probably because it closes setcpuspeed.
|
|
08-13-2010, 07:53 AM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
|
| This post has been thanked 2 times. |
|
08-13-2010, 12:28 PM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
__________________
|
|
08-12-2010, 10:40 PM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
BUT... it did not hold the setting solid enough for some users so that is why the polling time needed to be set low for them... I am now on the latest Script solution, the "OC_ Auto_v4.21.cab" which for some reason hold the unit down better for me and I no longer need the 20 or 30 checkTime AND ALSO am not needing the SOD cab which sets the reg "phone on sleep" to zero, anymore. Edit: I re-installed SOD cab Because of one occurance with freeze when Unplugging & plugging powercord while phone was sleeping... SOOOoo for me I can't believe it but this Script base solution is working better for me.. I currently have the poll interval (a setting for this script cab) set to 200 but I may increase it.. Here is the link & encourage others to try both solutions and post your results: http://forum.ppcgeeks.com/showpost.p...&postcount=281 THINGS TO LOOK FOR in speed limits: look to see if the "Msm7kcpu" app blinks steady. look to see if you can quikly swipe pictures in sense tab without lag. look to see if unit freeze while using keyboard on texting or Opera posting. Last edited by Maxx134; 08-13-2010 at 09:03 AM.
|
| This post has been thanked 4 times. |
 |
|
«
Previous Thread
|
Next Thread
»
Hybrid Mode
|
|
All times are GMT -4. The time now is 06:05 AM.
