Overclock TP2 in WM? - Page 37

**1999TL** · #1 (**permalink**) 08-15-2010, 08:16 PM

I'm about done with this overclock...AGAIN. Keep getting lockups.

puff601 · #2 (**permalink**) 08-15-2010, 08:26 PM

Quote:

Originally Posted by 1999TL

I'm about done with this overclock...AGAIN. Keep getting lockups.

try the oct app, it doesnt cause sod.

jerryyyyy · #3 (**permalink**) 08-15-2010, 08:57 PM

Quote:

Originally Posted by 1999TL

I'm about done with this overclock...AGAIN. Keep getting lockups.

I am using one of the older scripts and have not had a problem at all. If you want I can upload (I did). There are several similar versions available depending on your REG settings, but this approach has been bomb-proof for me.

**1999TL** · #4 (**permalink**) 08-15-2010, 08:44 PM

Thanks. Looks like I'm going to have to.

chuggy · #5 (**permalink**) 08-15-2010, 09:05 PM

I'm slightly confused right now. I've got the following installed:

MSM7kCpuSpeed V2
MortScript
OC Auto 4.21

I've set everything at 729 but when I open MSMykCpuSpeed it only shows 604. I have 604 set as my throttle speed. Is this what it should show, or did i do something wrong?

**popdog54** · #6 (**permalink**) 08-15-2010, 09:15 PM

Sometimes it takes a minute or two for the changed speed to show up. Check again. If it's still 604 then reboot and wait about 5 minutes before checking. When I first tried the program I kept rebooting, thinking it wasn't working.

chuggy · #7 (**permalink**) 08-15-2010, 09:19 PM

Quote:

Originally Posted by popdog54

Sometimes it takes a minute or two for the changed speed to show up. Check again. If it's still 604 then reboot and wait about 5 minutes before checking. When I first tried the program I kept rebooting, thinking it wasn't working.

So I've got the right components installed? I'll try restarting.

puff601 · #8 (**permalink**) 08-15-2010, 09:32 PM

Quote:

Originally Posted by chuggy

So I've got the right components installed? I'll try restarting.

yep, youve got the right stuff installed.... if you still have issues, try the oct app attached. also, make sure you install whatever oc app you use to your storage card..

**Maxx134** · #9 (**permalink**) 08-16-2010, 12:52 AM

Quote:

Originally Posted by chuggy

I'm slightly confused right now. I've got the following installed:
MSM7kCpuSpeed V2
MortScript
OC Auto 4.21
I've set everything at 729 but when I open MSMykCpuSpeed it only shows 604. I have 604 set as my throttle speed. Is this what it should show, or did i do something wrong?

did you click on the OC Auto 4.21 icon and apply settings there and reset when it told you before opening the msm7k app?

Quote:

Originally Posted by neudof

With the newest app I noticed that my CPU speed reads 528 when I stop the app. If I start it at any other speed higher or lower, it jumps to that speed and slowly drops down to around 100. Is this normal?

yea those are default settings.
to know whats your top speed, try setting "#Steps" to zero so it wont auto-scale down.
Then try higher speeds & when you freeze, you hit your limit.
No prob just reset it should revert to default & you have to set your settings to apply again.

**drewcam888** · #10 (**permalink**) 08-16-2010, 07:47 AM

anyone have any further suggestions for me to get this working since I am having this error message.
"Backlight / DispOn key was not found! Exiting"