Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[razorloves]

Originally Posted by Nagual

That's actually my PRI also...should it be newer with the new ROM even if I have an alternate radio (I use the Verizon)?

the pri will also be update when you flash the new sprint rom only if you flash following the instructions on the htc website where you downloaded it.

[coldheat06]

Originally Posted by captblaze

did you unzip the file? once you do that you run the file from your phone. that should put the phone in bootloader. if it does that you should be able to run hspl 0.37. if you cant unzip ssplmanual on your phone, just do it on your computer and then transfer to phone.

btw... make sure that you are connected via active sync

Thanks that seems to of worked....... Even though I did the same thing last night...... or at least I thought I did.


Thanks again.

[EvilRSA]

Okay guys, got my new Touch PRO, so much nicer then my Mogul, but I'm having a hell of a time unlocking this guy. Just up front, I read approx the first two pages in here, and the last 5, and did a search within the thread with the term "error". Also to point out, I'm on Windows 7 Ultimate x64 RTM.

I'm not getting very far, I've downloaded Raphael_CDMA_HSPL_037.exe, and made sure "Mobile Device Center" see's my device as connected, but when I run Raphael_CDMA_HSPL_037.exe I get all the windows I'm suppose to get, then the device reboots into the Tri-Color screen, and after a short timeout on the PC side, where the progress bar doesn't move it says that the USB cable is disconnected. I'm gone into the settings and changed how active sync handles the advanced network options, but with the advanced network unchecked I can't get Mobile Device Center to see my device....

I've picked up on two things, one, mem cards seem to have a change of fouling things up, espically if it has .nbh file on it, which mine doesn't, and I removed the mem card to to simplify things further

and two, that there is a why to flash from the phone / mem card...but I haven't been able to find any threads really detailing how to do so.

It's 5 o'clock here at work, so my game plan is to get home, and try again with my laptop, which is still running Win 7 Ult. x64, RC1 however, and try to attack my device again. If it fails, I'll check back on here and see if anyone can help me learn to do a flash from the mem card, and if it works, I'll post back that I got it work from a different system.

Thanks for reading my "War & Peace" post lol

[captblaze]

Originally Posted by EvilRSA

Okay guys, got my new Touch PRO, so much nicer then my Mogul, but I'm having a hell of a time unlocking this guy. Just up front, I read approx the first two pages in here, and the last 5, and did a search within the thread with the term "error". Also to point out, I'm on Windows 7 Ultimate x64 RTM.

I'm not getting very far, I've downloaded Raphael_CDMA_HSPL_037.exe, and made sure "Mobile Device Center" see's my device as connected, but when I run Raphael_CDMA_HSPL_037.exe I get all the windows I'm suppose to get, then the device reboots into the Tri-Color screen, and after a short timeout on the PC side, where the progress bar doesn't move it says that the USB cable is disconnected. I'm gone into the settings and changed how active sync handles the advanced network options, but with the advanced network unchecked I can't get Mobile Device Center to see my device....

I've picked up on two things, one, mem cards seem to have a change of fouling things up, espically if it has .nbh file on it, which mine doesn't, and I removed the mem card to to simplify things further

and two, that there is a why to flash from the phone / mem card...but I haven't been able to find any threads really detailing how to do so.

It's 5 o'clock here at work, so my game plan is to get home, and try again with my laptop, which is still running Win 7 Ult. x64, RC1 however, and try to attack my device again. If it fails, I'll check back on here and see if anyone can help me learn to do a flash from the mem card, and if it works, I'll post back that I got it work from a different system.

Thanks for reading my "War & Peace" post lol

when you flash from an sd card (no connection to pc necessary) you need to rename the file to RAPHIMG.nbh. you also have to manually put the device into bootloader... power off / press and hold power and vol down at the same time until tricolor screen appears. you should now be in bootloader mode and being asked if you would like to flash.

[EvilRSA]

does "RAPHIMG.nbh" have to be right on the root of the SD card I assume?

[Nagual]

Originally Posted by EvilRSA

does "RAPHIMG.nbh" have to be right on the root of the SD card I assume?

Yes, always.

[razorloves]

Originally Posted by EvilRSA

and two, that there is a why to flash from the phone / mem card...but I haven't been able to find any threads really detailing how to do so.

here's the sticky on flashing from mem card http://forum.ppcgeeks.com/showthread.php?t=61333

[EvilRSA]

hhrrrmmm....Okay, status update...

copied the file to the root of my sd card, renamed it to ralphimg, all caps, and did a soft reset. Now, I've been at a gray screen that says "loading...", and that's all it's doing for.......*looks at clock* 25 minutes now....

Bad flash image?
should I have deleted all the files off the sd card as well?
something else?

I saw in that thread about the sd flashing (thanks for the link) that it should have asked me to "Press power to continue" or something similar, but it never did so...just right to that "loading..." message......

what now? lol

[captblaze]

Originally Posted by EvilRSA

hhrrrmmm....Okay, status update...

copied the file to the root of my sd card, renamed it to ralphimg, all caps, and did a soft reset. Now, I've been at a gray screen that says "loading...", and that's all it's doing for.......*looks at clock* 25 minutes now....

Bad flash image?
should I have deleted all the files off the sd card as well?
something else?

I saw in that thread about the sd flashing (thanks for the link) that it should have asked me to "Press power to continue" or something similar, but it never did so...just right to that "loading..." message......

what now? lol

are you trying to unlock your phone after flashing the new maintenance ROM from HTC?

if so you need to do this ---> download SSPLManual_Raphael.zip to your phone / unzip / connect via active sync / run SSPLManual from your phone / you should now be in boot loader / unlock with HSPL 0.37

[EvilRSA]

Originally Posted by captblaze

are you trying to unlock your phone after flashing the new maintenance ROM from HTC?

if so you need to do this ---> download SSPLManual_Raphael.zip to your phone / unzip / connect via active sync / run SSPLManual from your phone / you should now be in boot loader / unlock with HSPL 0.37

Nope. I might still need to do what you suggest though.

Here's my story.

Happy Mogul user for nearly 2 years, but saw WinMobile 6.5, and said, wooo, I want that...

got an upgrade to the Touch Pro. Got it on Friday, had some problems with data services, got that all fixed on tuesday, and now want to get MightROM 6.5 running on it. On Mighty Mike's thread about installing the ROM he said the phone needs to be unlocked and started there.

Thats where I got the file I said in the post above, that wouldn't load through the PC, so I took the RalphIMG and put in on the SD card and did the soft reset.....

Thanks for everyone's help! This community ROCKS!

Okay, got ahold of sspl-manual, ran it from my phone, and everything worked like a charm. check the "tri-color" screen just for verification and I have SPL-0.37.CMONEX now. On to the next steps!