|
|
||||
Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)
CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you! SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!! there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C). 1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc. ![]() 2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands. 3. 0.35 for Verizon touch pro's ONLY. Important: first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device. to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com. but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!! preparations before flash: 1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en 2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx 3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip). instructions: 1) download Hard-SPL package from attachment, extract to an empty folder. 2) you must Have Phone Synced with PC in Windows Mobile! 3) run HardSPL exe that you downloaded before. 4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar. 5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL. 6) SPL flashes, device automatically reboots, job done. 7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG). NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL! to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears. NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious. make sure to get SSPL-Manual specifically for Verizon phones from the verizon package. NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here. NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's. -------------------------------------------------------------------------- Finally, Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!!
__________________
Main device: Athena (x7500)
![]() Other devices: Shift, Kaiser, Diamond (GSM version), Universals (Qtek 9000, Vodafone VPA IV) + non HTC ones. Donations To cmonex Last edited by cmonex; 12-07-2008 at 11:57 PM. |
This post has been thanked 762 times. |
This post has been thanked 41 times. |
|
||||
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
Problem..After following everything to a tee. When I turn my phone on all I get is the start screen that says TOUCH pro2. It just sits there and ges no further. I really need some help on this. After running the unlock software with no problem I used a custom rom from xda that was well liked the file name is EnergyROM_21885_RHODIUM_25.Dec.2009_StandardM2.5.r ar
Last edited by itspec; 12-28-2009 at 12:10 PM. |
|
||||
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
Quote:
If you do have the Verizon/Sprint TouchPro2, then use the unlocker located here: http://rhodiumw.htc-unlocks.com/hard-spl.php Make sure you use this one, not the GSM version. Use only one made for CDMA phones. I think that using a GSM unlocker on a Verizon/Sprint TP2 will brick the phone. If you do have a TP2, I'm not sure what you did to the phone and can recover. If you actually have the original TP, then ignore all the above because it doesn't apply to you. Bob
__________________
|
|
||||
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
Hey guys i just picked up a sprint touch pro that has some issues and needs to go to HTC's repair company(pcd) for repairs under warranty, it had the stock rom, i didn't try to flash anything on it but i do see in the bootloader
RAPH800 SPL-0.40.0000 not sure if that's the stock spl or not, when i had a tp before it had spl 0.37 and the same goes for the unlocker in the first post. does that seem right or should i do anything before i send it for repairs ? Thanks
__________________
T-Mobile MDA\HTC Wizard--> At&t Tilt--> Sprint Touch Pro (MetroPCS)--> Sprint Touch Pro 2 (Sold) --> Moto DROID (MetroPCS) --> T-Mobile HD2 --> EVO 4G (MetroPCS) --> Thunderbolt
“Scientists dream about doing great things. Engineers do them.” James A. Michener You can find me on XDA under Lebmb, everywhere else under Mikezpc |
|
||||
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
Quote:
|
This post has been thanked 1 times. |
|
||||
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
Hi, I have a brand new Sprint pro 2 which I want to connect to metropcs. It came with a sim card inside the phone. Do I remove it before I do anything with it? I've nerver flashed or unlocked a phone, but I know I can do it with the correct instructions. Is it possible for to guide me on how to do it or where to find the instructions? I heard of rhodium w hard-spl, is this one of the things I need to use to have my new phone working and running? Please give some advise, donation is not a problem.
Juan |
|
||||
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
you guys you are the best.
Thank you. donation on its way. Last edited by gatolsf; 11-05-2009 at 12:31 AM. |
This post has been thanked 5 times. |
|
||||
Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
thank you guys but im a noob at this, the instructions seem pretty thorough too. one question...
what is the "hard-spl"? -Chez |
This post has been thanked 2 times. |
![]() |
|
|
|