Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[BfA]

Telus Touch Pro. [New refurb, just got it a week ago]
Phone was at 100% battery power.
WMC said the phone was connected.

OK, hopefully I didn't **** up too badly. n00b mistake in that I watched the video walk-through and then downloaded the Diamond unlocker that was linked from it.

- accidentally ran diamond unlocker
- got error wrong device

Re-read it and saw I needed the Touch Pro unlocker so I went to that thread and downloaded it:

- ran raphael cdma hspl 037 unlocker
- got error
- asks to run recovery
- runs recovery and for current rom version says nothing
- i select update rom
- goes back to saying there was an error

At this point I just wanted to get the phone back to working

- ran raphael cdma relocker
- gets to screen where the file transfer is going
- says there was an error
Error [262]: Update Error
The ROM utility has encountered communication errors during the update process

- asks to run recovery
- I take the phone off the cradle, unplug the battery turn it back on and re-cradle it
- says that error recovery has been successful and the update process is ready to resume
- runs recovery and for current rom version says nothing
- i select update rom
- goes back to saying there was an error



Doing all this from my USB cradel. The final error I get on the security unlocked screen is:

Red Area:
RAPH000
SOL-0.38.0000
MicroP-Hermann (LED) v0C85

Green Area:
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVI v20

Upgrade ROM code error
Please try again

Then in the white area it says "Serial" if turned on while not on cradle or "USB" while on cradle.

DID I BRICK MY PHONE? If not could someone let me know how to fix it?

[Edit] Searched on the forums and it looks likes this might have to do with Windows 7 (x64) and WMC not properly connecting with the USB?

[timmy timtim]

Hey guys! I'm kinda a lurker on here, but I've actually been follwing PPCGeeks for a while. And it was suggested to me that I should finally contribute. So, here you go.

I found this today after some difficulty getting ActiveSync to open up the Hard-SPL files. Easy enough, it's a cab that installs directly into a System Tools folder in your Start Menu. Bootloader magic at your fingertips!

This may cause an issue if you happen to brick your phone, but the choice is yours...


Also, to give credit where it's due, here's the link where I plucked this puppy.

http://forum.ppcwarez.org/viewtopic....&view=previous

[Playboy83]

I tried to install the rom and now I am stuck at the bootloader screen with red, green, blue, and white, can't get out of it, what do I do?

[razorloves]

Originally Posted by Playboy83

I tried to install the rom and now I am stuck at the bootloader screen with red, green, blue, and white, can't get out of it, what do I do?

what rom?
need details. tell us everything it says on the bootloader screen.

[dtownsboy]

thanks for this unlocked and installed my first custom rom

[chrialex]

I noticed that as well on a replacement from TheSignal.com (US Cellular's insurance) and was wondering if the difference between them is worth knowing. In other words, would it be worthwhile to put .40 on in place of .37?

[mkturner74]

As soon as I ran the 'Manual' exe from my Verizon TouchPro2 the device screen went black and device is now unusable. Won't boot, hard or soft reset, nothing. Battery out and restarted but won't even fire up.

Any suggestions?

Originally Posted by cmonex

UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)


CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!

SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!

there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).

1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.

2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.

3. 0.35 for Verizon touch pro's ONLY.


Important:

first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!


preparations before flash:

1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).


instructions:

1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.

NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.

NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.

NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.

--------------------------------------------------------------------------

Finally, Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!!

the same thing keeps happening for me.

Originally Posted by mkturner74

As soon as I ran the 'Manual' exe from my Verizon TouchPro2 the device screen went black and device is now unusable. Won't boot, hard or soft reset, nothing. Battery out and restarted but won't even fire up.

Any suggestions?

[razorloves]

Originally Posted by french.vanilla

the same thing keeps happening for me.

this is the touch pro unlocker thread.

[nubbert]

oops nevermind. deleted post