Flash Touch Diamond from Sprint to Alltel - Page 8

madcapperx · #71 (**permalink**) 11-07-2008, 01:19 AM

Quote:

Originally Posted by thumper01

... After it was unlocked I flashed it with conflipper's ROM and then had to edit the EPST to add my phone number and home SID/NID (126/65535). There were a few other settings in the M.IP settings/profiles and Security settings that I had to change as well. I just used the values that were in the EPST on my 6700. I can post those settings here or e-mail them if you need them.

Man if you could post them or PM them I would really appreciate it. I have no way of getting those settings from my 6800. I don't guess any of that info would be in a regular cell phone would it? Thanks man.

thumper01 · #72 (**permalink**) 11-07-2008, 01:27 AM

Quote:

Originally Posted by madcapperx

Man if you could post them or PM them I would really appreciate it. I have no way of getting those settings from my 6800. I don't guess any of that info would be in a regular cell phone would it? Thanks man.

I'll do that tomorrow evening. I don't know if they are available in a regular phone.

**conflipper** · #73 (**permalink**) 11-07-2008, 10:14 AM

okay here is a sample of how my EPST setting look on my sprint diamond, with full data working on alltel network. try these settings, The important steps for data are 8, 10 and 11. if you can get these the way i have them then you will not have a problem.

Also remember to update your PRL to an alltel PRL file.

If you have any questions please feel free to ask.

Where XXXXXXXXXX is this should be your cell phone number.

EPST Menu

1 Display- Change Nothing Here

2 A-Key - Change Nothing

3 NAM Settings- Use this to Change your MIN and MDN if you know what these are. This is where your phone number is stored at, so for pogramming of your phone.

4 CDMA Settings- Shouldn't Have to change anything here either.

5 Home SID/Home NID- for me these settings are 1236/65535

6 Modem Settings- I didnt change anything here

7 PRL- use this to update your PRL

8 Security-

HDR AN AUTH USER ID- XXXXXXXXXX@alltel.net
HDR AN AUTH Password- alltel
PPP User ID- XXXXXXXXXX@alltel.net
PPP Password- alltel

9 Data Parameters (dont worry about)

10 M.IP Settings

Number of profiles-6
Active User Profile-1
MIP_Mode- Mobile IP preferred
MIP Registion Retries- 2
MIP Registration retry 1750 ms
MIP Pre-Registration-10
Mobile Node-HA Auth-Disable
Send a Registrtaion Req- Disable
Dormant Handoff Optimattion- Enable

11 M.IP Default Pofile (depending on what you use for Active User profile in step 10 set up that profile.

Enable Profile-Enable
NAI- XXXXXXXXXX@alltel.net
MN HA SPI Set- Enable
MN HA SPI Value-4D2
MN AAA SPI Set-Enable
MN AAA SPI Value-4D2
Revers Tunneling Preference- Enable
Home address- 0.0.0.0
Primary HA Address- 255.255.255.255
Secondary HA Address- 68.28.113.76
HA Shared Secret- secret
AAA Shared Secret- alltel
DMU public Key- 0
MN Authenicator-0

12 M.IP Default Profile1 (if you use Active user profile set to 1, then set up the infomation in step 11 here)

madcapperx · #74 (**permalink**) 11-07-2008, 06:59 PM

Quote:

Originally Posted by conflipper

....Also remember to update your PRL to an alltel PRL file.

how do I update the prl file? You are absolutely awesome for taking the time to write all that down for me. Thank you very much. my phone didn't come today, I am hoping it will be here tomorrow. Thanks to you guys, I will likely have it running soon after. Thank you all.=D>

madcapperx · #75 (**permalink**) 11-07-2008, 07:13 PM

Oh I forgot to ask you conflipper, does your phone have the roaming triangle going all the time? Are you using the radio that came with the sprint phone? Thank you again for your time and help.

**conflipper** · #76 (**permalink**) 11-07-2008, 08:00 PM

I updated to the verizon radio. it helps with the battery life.

Yes I do have the roaming trialngle. that is because of some setting on sprint that is not right with alltel. but once alltel provides an official ship rom for this phone that will go away.

To update to prl just check out this link. it also has PRL file downloads.

thumper01 · #77 (**permalink**) 11-07-2008, 08:37 PM

Those were my settings. The home SID was different, but that appears to be normal. Mine is 125 and my friend who is in Kentucky has 128.

Is there any way to reverse the changes made by installing the DCD Alltel carrier cab?

njkid32 · #78 (**permalink**) 11-07-2008, 08:37 PM

Con, are you using an alltel home sid or a sprint one? I'm not using the diamond but I would think it would act the same way. Anyway, my phone was a sprint phone and I had to not only change to an alltel prl but I had to change the home sid to an alltel one. Where I live I use a verizon tower so I have the flashing triangle icon. But, when I go into town I am on alltel and it goes away.

Just a thought

madcapperx · #79 (**permalink**) 11-07-2008, 08:58 PM

Quote:

Originally Posted by njkid32

Con, are you using an alltel home sid or a sprint one? I'm not using the diamond but I would think it would act the same way. Anyway, my phone was a sprint phone and I had to not only change to an alltel prl but I had to change the home sid to an alltel one. Where I live I use a verizon tower so I have the flashing triangle icon. But, when I go into town I am on alltel and it goes away.

Just a thought

what rom are you using? did you change your radio? thanks

njkid32 · #80 (**permalink**) 11-07-2008, 09:02 PM

Quote:

Originally Posted by madcapperx

what rom are you using? did you change your radio? thanks

I originally ran this RUU_Vogue_4350_ALLTEL_WWE_3.04.671.2_Radio_4350H_3 .37.10_Alltel_NV2.00_PRL30008_0331_Ship_withSpecia lNBH
rom. After I was up and running and had the phone connected on Alltel I changed to a modded rom. But, the main things I had to make sure were updated and correct were the PRL and home SID. Since then I upgraded to the latest radio by flashing the bell rom. Then flashing back to the modded rom.