An Easy Guide to Upgrading

[quantumforce1]

Originally Posted by sroussey

OK, I thought I would give this a try since there was a First Timers guide and all. I guess I have first timers problems...

I got my Mogul when it first came out, before it hit the stores. When it hit the stores I updated the ROM via the RUU program, which worked fine even though I was on Vista. As of this morning I was on the latest ROM/RUU from the HTC web site. No problems...

Following these intructions, I got the information from #1 & #2. Since I have a stock Sprint ROM, I skipped #3 as it describes. Now all my problems are in #4. When I ran it is started then stopped saying that there were communication problems. The mogul was in the bootloader. I started again, and it went for a while, then errored out suggesting that I follow some instructions to pull out the battery, etc. I did that but it lost communication again.

At this point the boot loader says TITA100 MFG / SPL-2.03.1000 / CPLD-9.

Now when I run the RUU I get error 328. Restared it with XP compat but no difference. Searching the forums brought up a reference to this post (http://www.modaco.com/content/Window...ltimate-guide/). It didn't make sense to me since I have already had success with Vista, but I followed it anyway. Now the RUU does not error but it did hang at 0% for the last few hours.

Now what?

Wow. That really stinks.
Try unplugging your phone and then rebooting the computer.
Turn off your phone and then back on. This should put you back into the
bootloader screen (tri-color).
I have noticed that Vista can get picky sometimes and just needs a reboot.
I have only used Vista for all my flashes. And only once did I absolutely have
to reboot it. But that did solve the problem.
Hope this helps you.

[sroussey]

Originally Posted by quantumforce1

Wow. That really stinks.
Try unplugging your phone and then rebooting the computer.
Turn off your phone and then back on. This should put you back into the
bootloader screen (tri-color).
I have noticed that Vista can get picky sometimes and just needs a reboot.
I have only used Vista for all my flashes. And only once did I absolutely have
to reboot it. But that did solve the problem.
Hope this helps you.

Rebooting didn't help.

[quantumforce1]

Originally Posted by sroussey

Rebooting didn't help.

Go back to step 3. Re-run the reLocker.
Once you get 1.06 SPL Bootloader installed either run the Unofficial Sprint 3.16 release
again. Or install an official carrier released rom (2.09/2.17).

[sroussey]

I found the solution! I used titan_exitbl.exe to get out of the bootloader. But first I had to use the taskmgr to find a wmdc background process (mobsync?) that kept the usb locked up (even though the usb connection setting was turned off in the wmdc settings).

Next up... custom rom

[lakai180]

ok newb question... i did everything right but every time i ran 3.16 i get stuck after it loads (not in the tri color boot load screen) but after the part where u reset ur phone and u get the sprint logo... on the bottom it says 3.16... but no matter whos rom i use it wont load after that... the only rom i am able to use now is telus wm5... im so confused as to why none of the roms i have work... any ideas... ive tried everything for the last 3 days... ive been three days wit out my mogul some one help me b4 i go crazy!!! hahaha... no but really any thoughts???

[penuch]

Okay so I am stuck at Step 4. I downloaded the file to my computer but now what?? When I try and open it on my computer nothing happens? Do I need to put it on my phone?

[Pasukun]

I feel like an idiot, but I am already stuck at step 1..

I have a Verizon version of Titan running an official carrier ROM. (never flashed)
I have so far.. HARD resetted the device back the factory default. and dialed *228 to re-authorize the phone use.

Later, when I dialed ##778# to get the ESN, MSID, and A-Key info..
I get a Verizon voice system telling me that.. "Your call can not be completed as a dial.. blah blah blah.." and I never see the EPST menu.

Could anyone please help me get through this step..?

Thank you in advance.

1. Get your ESN, MSID and A-Key info:
>>> a. dial ##778#, that will launch the EPST configuration menu
>>> b. select view
>>> c. make note of your ESN (Hex) value
>>> d. make note of your ESN (Dec) value
>>> e. make note of your MSID value (looks like a 10 digit tel number)
>>> f. select <view info> and select A-Key
>>>>>>Some carriers leave this blank, some need this info
>>>>>>If there is info here, make note of it now
>>> g. click <cancel> to exit the configuration menu

[Pasukun]

Okay, I figured it out.

It is just ##778 for Verizon.

[quantumforce1]

Originally Posted by Pasukun

Okay, I figured it out.

It is just ##778 for Verizon.

I made the update on page one. Thanks for the feedback.
Happy Flashing!!

[TONEEDO]

Can someone verify if their windows live/hotmail push still work using 3.16 rom? Mine stop working after i updated my phone...i really need the push mail and would go back to 2.17 if theres no fix. Thanks in advance.