Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS) - Page 59

s_inderjit · #**581** (**permalink**) 10-16-2008, 02:16 AM

I'm OKTA TOuch user on telecom new zealand network. I used .40 to downgrade the bootloader now stuch with spl 2.01.0000. Telecom has not released any exe rom. when i try to install any other it gives an error "invalid vendor ID" what can be done at this stage.....
Please suggest....
thanks

jljohnson919 · #**582** (**permalink**) 10-20-2008, 02:46 AM

Quote:

Originally Posted by ImCoKeMaN

I have made an unlocker/patched bootloader for the touch. This is similar to the Hard-SPL for the Titan (Thanks Olipro for the lessons and the modified version of Pof's JumpSPL). It will CID unlock your device and allow you to flash unsigned code, these changes allow custom roms to be used.

If you need your device to be perfect for work etc. you might want to make sure you have a backup plan before running this. It has been tested successfully, but just remember you don't NEED to use this unlocker =)

This is only the first step for custom roms, but if you look in my folder on the FTP you will see a test rom that will give you 10mb more storage space with no additional chances. It wasn't customized, but it was to test that the unlocker worked. The same tools for rom making on the Titan work for the Vogue by the way.

Please read all the instructions in the unlocker itself. It will need to be downloaded to the PC and then run while the device is attached with activesync. At one point you need to disconect and reconnect. At this point it will look like it's flashing a rom (standard rom update utility). Let that complete. Finally you will need to disable USB in activesync for the exitbl step. That's about it, if you have trouble re-read this post and the instructions again.

When completed successfully it will show version 0.41.CoKe or 2.31 CoKe and your device will be unlocked.

If you think you are done and see 0.36.Coke or 2.00.CoKe they are sspl loaders only and you are not unlocked yet DO NOT FLASH ROMS FROM THEM. Re-read this post and follow all the instructions in the black screen that comes up when running the EXE and it will get you unlocked.

Notes:

* No need to extract, it will run straight from the exe (it's not just an RUU)

* When flashing roms or this unlocker, be prepared for a hard reset

* This will not enable you to flash roms made for other devices (titan, 6700 etc.)

* This is for a CDMA device; the HTC Vogue aka Sprint Touch. (not Elf)

Thanks to my brave testers: Lattisimo and Sonny.

Alright here it goes:
2.31 version: (specifically designed for GPS capable 3.xx roms, ensure you see 2.31.CoKe before flashing an exe)
Thank you Colonel for your diligent and brave testing while my vogue was bricked!
WARNING: this will only work with the 3.xx roms (Alltel EXE only at this point) and may not allow older roms. It will not be overwritten like the 0.40 SPL however so it won't leave you completely bricked like running the alltel exe was doing before this.

ftp://up.ppcgeeks.com/Vogue/Users/ImCoKeMaN/Vogue_unlocker_MFG_2.31.exe
or
http://rapidshare.com/files/113951076/Vogue_unlocker_MFG_2.31.exe
BTW: This is an MFG SPL and after flashing the alltel exe you can do SuperCID with rtask a like titan

0.41 Version (this one has overwrite protection like the 2.31, but is non GPS)
Use this one if you are not currently using/flashing a GPS radio/rom.
(not fully installed correctly until you see 0.41.CoKe)

http://rapidshare.com/files/11395035...ocker_0.41.exe

Original 0.40 Version (mosty outdated except for "relocking" ability, also more dangerous than 0.41 and 2.31)
VERY IMPORTANT / Warning: If your carrier did not release a rom and you flash an exe of another carrier with the 0.40 unlocker you won't be able to flash ANY rom until unlocking again (this requires booting into WM)

ftp://up.ppcgeeks.com/Vogue/Users/Im...e_unlocker.exe

* I haven't protected the 0.40 bootloader from overwriting so any stock EXE (includes a bootloader) ROM will relock the device. I suggest only flashing custom nbh files after using the 0.40 unlocker (they don't generally include bootloaders). I did this so that there is no need to create a custom relocker (for warranty concerns), and in general if installing only custom roms it won't be a problem.

P.S. Let's try to keep this thread on topic. The hard-SPL thread in the titan forum got a bit out of hand. If you have questions about making custom roms, tools (same as titan), boot screens etc. please use a different thread.

with this unlocker will i be able to use the stock rom to access gps with google maps or will i need a custom rom as well as the unlocker??

cjmedina · #**583** (**permalink**) 10-25-2008, 08:27 PM

if i use this tool how do i get it back to stock other than flashing stock rom? if i have a warranty problem how do i go back to the stock spl

dette · #**584** (**permalink**) 10-26-2008, 03:27 AM

Quote:

Originally Posted by jljohnson919

with this unlocker will i be able to use the stock rom to access gps with google maps or will i need a custom rom as well as the unlocker??

You will need a custom ROM.. What carrier are you on? ..

Quote:

Originally Posted by cjmedina

if i use this tool how do i get it back to stock other than flashing stock rom? if i have a warranty problem how do i go back to the stock spl

It says you have a Kaiser? If so you are in the wrong section!.. If not then you will need to flash to the 0.40 unlocker and the flash the official ROM depending on your carrier this will differ

cutz · #**585** (**permalink**) 10-27-2008, 04:03 PM

will this work on spl 2.01 on the newer htc touch?????

dette · #**586** (**permalink**) 10-27-2008, 04:29 PM

Quote:

Originally Posted by cutz

will this work on spl 2.01 on the newer htc touch?????

yep

neo3d · #**587** (**permalink**) 10-28-2008, 02:42 AM

Quote:

Originally Posted by kurupte

I've tried to install the unlocker 10 times now. No matter what I do i always get error 262. I've read the readme, followed all the instructions in it as well as the instructions in the program itself and i cant seem to figure it out. Additionally i've read through this entire post. Can anyone give me even more detailed instructions as to what to do? Im started to fell like a complete idiot. thank you in advance

Also are you supposed to always end up in recovery or is the program supposed to complete itself when run without any type of errors.

Same here, been at it for about 3hrs and I get the same Error 262 everytime:

on 1 XP laptop, tried diff USB ports and diff USB cables
on 1 Vista HP desktop, " "
on 1 XP desktop, " "

Initially, I ran a clean install of the latest Sprint ROM from the HTC website. Removed memory card. Rebooted PC. It seems like a good chunk of folks on here getting Error 262. It seems too common to be an isolated problem.

Any ideas?

*BTW, my brother says you can't run the HTC Sprint update from Vista, he had problems with it all day but it worked perfect on XP.