Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

[komgol]

DERP DERP.

That fixed it. I have no idea how I had the wrong startup.txt It took me a while to figure out that I had the RAPH500, and I suspect that I just failed to overwrite startup.txt with the correct one.

At any rate, it's booting now.

[chrialex]

No problem, most of us have overlooked things before, that's what gave me the idea to look at your startup.txt instead of glance over it.

[xlarkascendingx]

has anyone looked into u2nl? if not, ill have to do some intense research

[niralupatel]

I've been all over the place trying to fix my "Waiting for SD Card error", but no oluck. I have HTC touch pro-which i beleive shuld be using raphael startup.txt

I do have it on my root for SD card. SD card is formatted to FAT32, still no luck

Can anyone help me out please...Or can you just send me startup file to confirm I am using right one.

Startup config:

set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 1910
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=210 clock-7x00.a11=500 msmvkeyb_toggle=off gsensor_axis=-1,-2,3 board-htcraphael-navi.wake=0 physkeyboard=raph"
boot

set mtype 1910
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=210 msmts_calib=0x7a.0x5e.0x35a.0x37f clock-7x00.a11=500 msmvkeyb_toggle=off gsensor_axis=-1,-2,3 board-htcraphael-navi.wake=0 physkeyboard=raph"
boot

[makkonen]

If you're using a Verizon Touch Pro, that's a RAPH500. You're using the RAPH100 startup. Try fixing that, and if it doesn't fix the problem, we'll go from there.

deja vu.

[niralupatel]

I am on verizon network, but the phone is Alltel HTC Touch pro..

[xlarkascendingx]

then you need the right startup for the alltel touch pro

[makkonen]

Originally Posted by xlarkascendingx

has anyone looked into u2nl? if not, ill have to do some intense research

I have played with u2nl and autostart, to get an evo running on Cricket. It worked fine, after making sure all the paths pointed to the right places.

I'm not sure whether it is necessary or sufficient for an xdandroid phone to get working data on Cricket (though I suspect it is at least necessary, assuming you're on an account that uses a proxy, and not one of the full android accounts). I think in order to get it to work, you'll need at least a little comfort in messing with shell scripts. This download contains a precompiled binary and a good set of scripts; it's a good starting point. Read up on the steps necessary for flashing Android phones to Cricket for more info on how you'd install and run the scripts. (You can probably skip the autostart.apk stuff, since xdandroid's got plenty of spots where you can stick a command to run a script at startup.)

Good luck.

I am on verizon network, but the phone is Alltel HTC Touch pro..

Well, since it's CDMA, it's definitely not a RAPH100. Pull the battery; it'll be listed under there somewhere.

[niralupatel]

i have start ups for raph and raph 800. is it raph 800 then?

[niralupatel]

Well, since it's CDMA, it's definitely not a RAPH100. Pull the battery; it'll be listed under there somewhere.

Nope cant seem to find any info after pulling the battery except S/N and phone model #