08-08-2010, 01:33 AM
|
||||
|
||||
Re: Overclock TP2 in WM?
I can do 710 and 748 and it works well. Seeing a some extra battery drain but I assume its because of active sync and exchange... On busy exchange email days I notice more drain for obvious reasons. I tried 787 but had boot to lockup on my custom rom. and I didn't install the OC_Auto4.2 to the SD card... Thank god for XDA_UC! Good thing Im used to flashing several times a week...
Other then that its really cool we can OC. I am thinking of making an EXT to cook it in and maybe make rom first boot a little faster... Thanks all!
__________________
VZW TP2 WM6.5.x...HTC Sense 2.x... , 8gb SD Card
ipaq2200 - ipaq4100 - ipaqhx2110(wm6.5) - dell axim v3 - motoQ - i760 - xv6800 PPCK 23081 
|
|
08-08-2010, 01:53 AM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
At 710 right now, but a quick question. Would overclocking make my phone a lot hotter and reduce the life of the cpu?
|
|
08-08-2010, 02:00 AM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
If you are afraid or just do not want to deal with scripts, then this post is for you: Quote:
And also to set the startup on a reset to 2min, which is needed to give enough time for the phone to fully boot up before the OC kicks in(on a soft-reset). So all-you-need, three cabs here: EDIT: I think Msm7kCpuSpeed_v2 app not needed, just 2 other cabs, but I still install it anyway to check the speed, then close that app. Never leave it open as it will crash when unit sleeps. EDIT2: For those lucky enough to clock higher... OR un-lucky enough to need more control from SOD... USE THE SCRIPTS!!: Quote:
__________________
Last edited by Maxx134; 08-08-2010 at 12:30 PM.
|
| This post has been thanked 4 times. |
|
08-08-2010, 02:01 AM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Here are my results with SPB Benchmarks v1.6. All results are in Ms and lower is better/faster
ROM = Formula's SPB MobileSense 3.5.5 - Formula.LD.23563.E.080410.exe (WM 6.5 COM5) Clean flash done right before tests with Task29 prior(to assure integrity) Fresh reboot + 2 mins wait(to make sure startup apps are fully loaded) done before EACH run. ------------------------------------------------------------ Stock (530mhz) - neither Msm7kCpuSpeed nor any other OCing program installed RUN #1 ----------FILE SYSTEM---------- Write 1MB file = 454ms Read 1MB file = 64ms Copy 1 MB file = 489ms Write 10kb x 100 files = 3910ms Read 10kb X 100 files = 336ms Copy 10kb X 100 files = 3275ms Dir. list of 2k files = 1202ms Internal adatabase read = 808ms -----------------MISC.----------------- Compress 1MB file using ZIP = 2719ms Decompress 1024x768 JPEG file = 409ms CPU Test: Whetstones MFLOPS = 3485ms CPU Test: Whetstones MOPS = 1023ms CPU Test: Whetstones MWIPS = 7316ms Copy 1MB using memcpy = 8ms RUN #2 ----------FILE SYSTEM---------- Write 1MB file = 453ms Read 1MB file = 64ms Copy 1 MB file = 487ms Write 10kb x 100 files = 3820ms Read 10kb X 100 files = 327ms Copy 10kb X 100 files = 3218ms Dir. list of 2k files = 1201ms Internal adatabase read = 795ms -----------------MISC.----------------- Compress 1MB file using ZIP = 2705ms Decompress 1024x768 JPEG file = 401ms CPU Test: Whetstones MFLOPS = 3488ms CPU Test: Whetstones MOPS = 1030ms CPU Test: Whetstones MWIPS = 7319ms Copy 1MB using memcpy = 8ms RUN #3 ----------FILE SYSTEM---------- Write 1MB file = 455ms Read 1MB file = 66ms Copy 1 MB file = 488ms Write 10kb x 100 files = 4088ms Read 10kb X 100 files = 342ms Copy 10kb X 100 files = 3323ms Dir. list of 2k files = 1218ms Internal adatabase read = 788ms -----------------MISC.----------------- Compress 1MB file using ZIP = 2743ms Decompress 1024x768 JPEG file = 409ms CPU Test: Whetstones MFLOPS = 3478ms CPU Test: Whetstones MOPS = 1020ms CPU Test: Whetstones MWIPS = 7300ms Copy 1MB using memcpy = 8ms ----------------------------------------------------------- Overclocked to 787Mhz with Auto_OC tool via Msm7kCpuSpeed V2 RUN #1 ----------FILE SYSTEM---------- Write 1MB file = 441ms Read 1MB file = 57ms Copy 1 MB file = 482ms Write 10kb x 100 files = 3148ms Read 10kb X 100 files = 284ms Copy 10kb X 100 files = 3036ms Dir. list of 2k files = 1030ms Internal adatabase read = 639ms -----------------MISC.----------------- Compress 1MB file using ZIP = 2370ms Decompress 1024x768 JPEG file = 303ms CPU Test: Whetstones MFLOPS = 2358ms CPU Test: Whetstones MOPS = 737ms CPU Test: Whetstones MWIPS = 4977ms Copy 1MB using memcpy = 7ms RUN #2 ----------FILE SYSTEM---------- Write 1MB file = 436ms Read 1MB file = 58ms Copy 1 MB file = 495ms Write 10kb x 100 files = 3152ms Read 10kb X 100 files = 294ms Copy 10kb X 100 files = 3077ms Dir. list of 2k files = 1043ms Internal adatabase read = 652ms -----------------MISC.----------------- Compress 1MB file using ZIP = 2359ms Decompress 1024x768 JPEG file = 307ms CPU Test: Whetstones MFLOPS = 2367ms CPU Test: Whetstones MOPS = 751ms CPU Test: Whetstones MWIPS = 4987ms Copy 1MB using memcpy = 7ms RUN #3 ----------FILE SYSTEM---------- Write 1MB file = 430ms Read 1MB file = 56ms Copy 1 MB file = 494ms Write 10kb x 100 files = 3158ms Read 10kb X 100 files = 278ms Copy 10kb X 100 files = 3056ms Dir. list of 2k files = 1021ms Internal adatabase read = 604ms -----------------MISC.----------------- Compress 1MB file using ZIP = 2401ms Decompress 1024x768 JPEG file = 308ms CPU Test: Whetstones MFLOPS = 2358ms CPU Test: Whetstones MOPS = 753ms CPU Test: Whetstones MWIPS = 4972ms Copy 1MB using memcpy = 7ms As you can see OCing to 787Mhz brings tremendous benefits. Not a single problem during overclocked state. Did not notice any excessive battery drain, nor did phone overheat during intensive benchmarking(Battery temp stayed under 40c) All the tests took a bit over 3 hours, hitting thanks button takes less than 3 seconds  , but then again i didnt do it for thanks
__________________
Current: GS4(2.3Ghz)+TP2(787Mhz),HTC prior Diamond, TP,Wizard.HTC freak since Wallaby '02
Who needs home net?  When you can tether for free?: D 
|
| This post has been thanked 11 times. |
|
08-08-2010, 03:37 AM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
 Way to take one for the team buddy. I was really wondering how well the OverClocker actually worked, and now I have my answer. So thank you very much kind sir. I actually download this like a week ago, but still have yet to put it on my Phone, as I wanted to wait until I got a bit more info on it.
__________________
Phone: hTc Evo 4g LTE
HBoot: 1.12.2222 (S-Off) ROM: MeanROM v6.0 (OC @ 1.72 GHz) Kernel: #Mean-v0.5.1728
|
|
08-08-2010, 10:12 AM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
For me, I can OC to 729. Anything more and it locks up. That's good enough for me.
 Engergy ROM with CHT 8/1 Using Msm7kCPUspeed v2 Dont know what the build date is since I cannot ##786# with this ROM Last edited by Scoob; 08-08-2010 at 10:14 AM.
|
|
08-08-2010, 11:26 AM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
|
|
08-08-2010, 12:03 PM
|
||||
|
||||
|
Re: Overclock TP2 in WM?
Quote:
OK added higher OC values for those lucky people out there  http://forum.ppcgeeks.com/showpost.p...&postcount=281 Should go up to 902mhz now.
|
| This post has been thanked 4 times. |
 |
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
All times are GMT -4. The time now is 10:15 AM.
