Apache WM6.1 Kitchen CE OS 5.2.19716 (Build 19716.1.0.0) - UPDATED 20080308

[echothreezero]

Originally Posted by zfactor

what os are you running??

XP Pro SP2

I was having probs with a 6.1 build (mostly centred around SMS issues like sender info not being received) so I wanted to do a new build and see if it was due to the particular combination of apps I included.

I have got to the point where I find it better to build a striped down ROM and the add apps later as although it means they are not integrated as well (eg s2u2 settings in control panel etc) it means I can easily upgrade when updates come out and I can remove software to troubleshoot bugs.

Long story short - I have gone back to a stripped out 6.0 build using the old kitchen until (if?) a new release of 6.1 is made. Hopefully by then my issue with the current kitchen will also have disappeared. I'm happy with 6.0 anyway - I don't really like 6.1's threaded sms - Pocket CM does it 1000 times better.

[Sarge, USMC]

I want to transfer the kitchen I built on the desktop over to the laptop so both machines are the same. What files do I need to transfer other than the *.txt kitchen configuration file?

[gguruusa]

Originally Posted by Sarge, USMC

I want to transfer the kitchen I built on the desktop over to the laptop so both machines are the same. What files do I need to transfer other than the *.txt kitchen configuration file?

You need to use the .msi to install on your laptop, then copy the kitchens and projects folders from your desktop to your laptop, finally, run the updater and update the buildos component as necessary.

[Pir8Man]

is it possible to use the new buildOS kitchen with the wm6.0 rom & OEM files?
I copied the rars and selections file to the new kitchen locations & edite the selections file to point to where the rars are.

I am wondering if it will compile correctly... The old kitchen had a selection list for the carrier type. The new kitchen just has a pull-down menu to select carrier type. I was wondering if they are compatible or would conflict.

Besides any behind-the-scenes areas that I am not aware of.

I am looking at rolling back to WM6 due to not being able to run non-certified applications. And would like to just use the one new kitchen moving forward, instead of keeping both kitchens installed on my PC.

[gguruusa]

Originally Posted by Pir8Man

is it possible to use the new buildOS kitchen with the wm6.0 rom & OEM files?
I copied the rars and selections file to the new kitchen locations & edite the selections file to point to where the rars are.

I am wondering if it will compile correctly... The old kitchen had a selection list for the carrier type. The new kitchen just has a pull-down menu to select carrier type. I was wondering if they are compatible or would conflict.

Besides any behind-the-scenes areas that I am not aware of.

I am looking at rolling back to WM6 due to not being able to run non-certified applications. And would like to just use the one new kitchen moving forward, instead of keeping both kitchens installed on my PC.

New kitchens will _not_ work with the prior buildos verisons. Old kitchens may work with the current buildos version, but you'll likely have warnings and duplicate module problems you'll need to address (if it loads, it should work - I haven't checked in a few weeks, but it used to load). WM6 (and WM5 for that matter) can be made available in new buildos format if there is enough demand.

[Eckxszo]

ia cannot open bluetooth explorer after flashing..what suppose to do to fix it? pls help..

[Pir8Man]

Originally Posted by gguruusa

New kitchens will _not_ work with the prior buildos verisons. Old kitchens may work with the current buildos version, but you'll likely have warnings and duplicate module problems you'll need to address (if it loads, it should work - I haven't checked in a few weeks, but it used to load). WM6 (and WM5 for that matter) can be made available in new buildos format if there is enough demand.

Thanks for the info. now i can roll back to WM6 and run my apps safely. I would like the previous kitchen updated to work with the newer OEM & Shareware modules. I would have pulled out the duplicates myself, but the kitchen file is protected. Many OEM's were moved from the main kitchen to the OEM rar and there are tons of duplicates if I try to use them together. To get it to work, I have the OEM file from each kitchen being referenced . Since the new BuildOS intent is to be a one-stop-shop for rom building, it would be nice if the WM5/6 kitchens were brought up to speed.

[Robtao]

Originally Posted by Pir8Man

is it possible to use the new buildOS kitchen with the wm6.0 rom & OEM files?
I copied the rars and selections file to the new kitchen locations & edite the selections file to point to where the rars are.

I am wondering if it will compile correctly... The old kitchen had a selection list for the carrier type. The new kitchen just has a pull-down menu to select carrier type. I was wondering if they are compatible or would conflict.

Besides any behind-the-scenes areas that I am not aware of.

I am looking at rolling back to WM6 due to not being able to run non-certified applications. And would like to just use the one new kitchen moving forward, instead of keeping both kitchens installed on my PC.

I could be off base here, but it sounds like the "no-certificate" error message. If that is the case, include the CF .NET3.5 OEM and it should make all the apps work.

[Pir8Man]

Originally Posted by Robtao

I could be off base here, but it sounds like the "no-certificate" error message. If that is the case, include the CF .NET3.5 OEM and it should make all the apps work.

I already included the .NET CF3.5 RTM OEM... do I also need to include the netCF35 Exception Messages OEM ??

[Robtao]

Originally Posted by Pir8Man

I already included the .NET CF3.5 RTM OEM... do I also need to include the netCF35 Exception Messages OEM ??

I did not have to. The main .NET 3.5 kitchen OEM fixed all my certificate issues. Sorry its not fixing yours.