Treo Pro CDMA HardSPL - Page 19

bushe777 · #**181** (**permalink**) 03-15-2010, 04:47 AM

Can someone help me. I did the SD method and am stuck at bootloader, so then I tried SD method again to install stock SPL and same result, stuck at bootloader, and now I can't make the sd method work again neither its stuck at loading... when trying to install HardSPL or stock SPL, and using CFAY CustomRUU also appears stuck at 0%.

What can I do to fix this?

**skeegcpp** · #**182** (**permalink**) 03-15-2010, 09:29 AM

Quote:

Originally Posted by bushe777

Can someone help me. I did the SD method and am stuck at bootloader, so then I tried SD method again to install stock SPL and same result, stuck at bootloader, and now I can't make the sd method work again neither its stuck at loading... when trying to install HardSPL or stock SPL, and using CFAY CustomRUU also appears stuck at 0%.

What can I do to fix this?

well, make sure ur sd card is formatted to FAT32, once u've done that, download cmonex's unlocker instead. to unlock via sd, find the ruu_signed_.nbh file, rename it to PANTIMG.nbh, and paste it to the root of ur sd card. now if the card was already formatted to FAT32, delete all the other images from the root of ur sd card. and only paste the newly renamed .nbh to the root of ur sd card. to unlock via usb, sync ur fone to a pc using activsync or wmdc. run the unlocker application. now, i've noticed that unpluginng the fone when u cee the tri-color screen and then replugging ur fone completes this process(shudnt have to do this when flashing roms, ONLY when unlocking the device) once everything is done go back into bootloader, it shud say .36.cmonex now.

tiffanista · #**183** (**permalink**) 03-18-2010, 01:32 AM

1st, I'd like to thank you for this update. I was able to download this with no major problems. Now WMDC doesn't recognize my phone when I plug it with the USB. Please help.

**skeegcpp** · #**184** (**permalink**) 03-18-2010, 07:18 AM

Quote:

Originally Posted by tiffanista

1st, I'd like to thank you for this update. I was able to download this with no major problems. Now WMDC doesn't recognize my phone when I plug it with the USB. Please help.

did u try the basics 1st? soft reset, check or uncheck advanced functionality? reboot pc?

bk money · #**185** (**permalink**) 03-25-2010, 02:32 PM

I am using Vista Ultimate 64 Bit. Had the issue with adding hardspl through usb. Unplugged after bootloader started, plugged back in and process completed. Thank you for all the info.

dexxyboy · #**186** (**permalink**) 03-28-2010, 01:59 PM

i have tried everything but still does not work pleasse help me because i have a dutch version of the palm treo t850 and i have followed all the instruction you posted but still can not change my rom.
When it get to the tricolour screen it does not move again after i hear the sync signal dead and it does not connect again.I have also found another version of the rom realvga but that is able to take me to the screen where it should start to load after the tricolor stage but there too it does not move at all till it tells me there is no connection with my phone am desperate please help me

zantac · #**187** (**permalink**) 03-29-2010, 08:32 PM

I had trouble keeping my phone connected with activesync. I downloaded the cab file thats recommended when you have this problem. I still couldnt get this to work. Finally I downloaded CFAY_Treo_Pro_WM6.5_1.0.rar from this site and it installed without any issues. Just thought I would share that with people having problems flashing their phones.

**ooxteme** · #**188** (**permalink**) 03-30-2010, 01:47 PM

Quote:

Originally Posted by zantac

I had trouble keeping my phone connected with activesync. I downloaded the cab file thats recommended when you have this problem. I still couldnt get this to work. Finally I downloaded CFAY_Treo_Pro_WM6.5_1.0.rar from this site and it installed without any issues. Just thought I would share that with people having problems flashing their phones.

It's all about where you disconnect and reconnect your usb when running HardSPL. Like me most of the lick is on the 2nd screen before the unlocker begins to run

arturoocu12 · #**189** (**permalink**) 03-31-2010, 07:03 PM

i was trying to do unlock the palm treo pro on the sd so i follow the directions and when the bootloader find the file says to cancel or continue so i pressed the power botton to continue with the update and then says loading and thats it it got stock right there and i tryed to take the battery off to start the phone normaly but it doesnt work it keep showing up the bootloader screen with 4 colors :/ what should i do?

**skeegcpp** · #**190** (**permalink**) 03-31-2010, 07:15 PM

Quote:

Originally Posted by arturoocu12

i was trying to do unlock the palm treo pro on the sd so i follow the directions and when the bootloader find the file says to cancel or continue so i pressed the power botton to continue with the update and then says loading and thats it it got stock right there and i tryed to take the battery off to start the phone normaly but it doesnt work it keep showing up the bootloader screen with 4 colors :/ what should i do?

ok when unlocking via sd, the fone didnt display the "rom upgrade complete" message like when flashing a rom. what i did was after a short while i removed the battery then removed the sd card. reset and put fone into bootloader, if u used cmonex's unlocker, its gona say XXXX.cmonex. if thats there, congrats, ur PTP is unlocked.