Treo Pro CDMA HardSPL

[Malachi]

Can anybody help me?

Long story short, I was flashing back to stock SPL, using sd card, and pulled the sd card out while it was flashing (don't ask, I seemed to forget for a moment what I was doing and realized I needed my card for my other phone Now, I have the stock SPL, shows PANT200 SPL-0.36.0000 CPLD-2 when phone starts, and says Upgrade ROM code error Please Try Again. But, if I put my sd card in it with PANTIMG.nbh SPL file, then I get a screen that says "Loading...". And that's it, left it like that forever it seems and no change.

Any idea? It won't connect to the computer so I can't flash from computer. Even QPST won't find it.

TIA,
Malachi

[skeegcpp]

Originally Posted by Malachi

Can anybody help me?

Long story short, I was flashing back to stock SPL, using sd card, and pulled the sd card out while it was flashing (don't ask, I seemed to forget for a moment what I was doing and realized I needed my card for my other phone Now, I have the stock SPL, shows PANT200 SPL-0.36.0000 CPLD-2 when phone starts, and says Upgrade ROM code error Please Try Again. But, if I put my sd card in it with PANTIMG.nbh SPL file, then I get a screen that says "Loading...". And that's it, left it like that forever it seems and no change.

Any idea? It won't connect to the computer so I can't flash from computer. Even QPST won't find it.

TIA,
Malachi

have u tried doing it, connected to ur pc?

[Malachi]

yes, tried that too, but it won't connect to pc. bootloader screen shows USB, but activesync won't recognize it and RUUs wont' either.

Thanks for the effort though.

[fedie]

Will this work with a Telus pro? and can i restore it back to stock? (telus phone) and finally, is there any telus compatible 6.5 roms?

Thanks

[Malachi]

Originally Posted by Malachi

yes, tried that too, but it won't connect to pc. bootloader screen shows USB, but activesync won't recognize it and RUUs wont' either.

Thanks for the effort though.

Bump. anybody?

[Malachi]

OK, thanks to Cmonex I got it fixed.

Here is what she told me:

"hi, just connect to mtty, and use: "set 16 0".
itwill be fine then "

I did it, and soft reset, and everything is fine.

[starboy450]

does this werk well?

[nuke747]

I have updated to the Hard-SPL and successfully got a ROM ofWindows 6.5 onto the Treo Pro. However this is a brand new phone and people are complaining of not being able to hear me (which is not a problem of the new ROM, it occured fresh from the factory that way).

Now I need to reload it back to the factory SPL (which was 32 not 36). I am having a tough time finding posts that make sense to me.

I know that the first post of this thread shows how to restore it, but I'm having no success...and will it restore it to the default Alltel load?

[skeegcpp]

Originally Posted by nuke747

...and will it restore it to the default Alltel load?

yupps...jus flash the stock rom first, then restore the hspl. after doing that and a hard reset after it boots for the first time, shud have u back stock.

[jacktee]

Hay I have two alltel treo Pros. The older one I am not using so I tried the flash on it and worked great, but the new one i am using will not Hardspl.
The new one when in boot loader says
Pat200
spl-0.38.0000
cpld-2 when I do it with the buttons. PANTHER_CDMA_HSPL_V101.exe Will not work I get the Make shure the device is properly synced window. I ended partners with the old one and made new with this one but still the same. sspl Manual boot loader runs then it sayes
Pat200
SPL-0.32sspl
cpld-2 but still will not hspl same even when I tried PANTIMG.NBH from the sd card it just sets at the tricolor mode and does nothing. Allso I tried the 6.5 flash from Big-ERom23511
that gets to the loading stage but sits a 0% for ever intill I get a conection error. any help please mybe ths sd flash but it just sits in the tricolor screen. is ther somthing im missing on the sd flash I renamed and put the PANTIMG.NBH file from your link on the card. Help.