|ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors

[KIOWA69]

Well like was put out before it is a new rom so give it some time and it will get fine tuned eventually, even after it's fine tuned it's not going to be for everyone, luckily with the Energy Series you have lots of choices on what version of the rom to run.

[siniority]

on the gtx rom you should remover the arkswitch hotkey on the top left of the screen if you already have task manager default on the right when you press the clock..also...whats up with mms only able to send out 300k....we like to see more on the next update please...being limited to only send out minimal when our phones can send out massive better quality photos

[tkedch]

Originally Posted by siniority

on the gtx rom you should remover the arkswitch hotkey on the top left of the screen if you already have task manager default on the right when you press the clock..also...whats up with mms only able to send out 300k....we like to see more on the next update please...being limited to only send out minimal when our phones can send out massive better quality photos

Here you go, just change the reg below, that gave me 5 or 4.8 (in reality).
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"Wap2SendLimit1"=dword:00019000
"Wap2SendLimit2"=dword:00032000
"Wap2SendLimit3"=dword:0004b000
"Wap2RecvLimit1"=dword:00019000
"Wap2RecvLimit2"=dword:00032000
"Wap2RecvLimit3"=dword:0004b000
"Wap1SendLimit1"=dword:00019000
"Wap1SendLimit2"=dword:00032000
"Wap1SendLimit3"=dword:0004b000
"Wap1RecvLimit1"=dword:00019000
"Wap1RecvLimit2"=dword:00032000
"Wap1RecvLimit3"=dword:0004b000
"Wap1RecvCount"=dword:00000003
"Wap2RecvCount"=dword:00000003
"Wap2SendCount"=dword:00000003
"Wap1SendCount"=dword:00000003

Change wap2recvlimit3 and wap2sendlimit3 to 5000000 or whatever number you like under decimal, NOT HEX. then you should be able to see under mms options that the third selection will be changed to 4.xmb.

[siniority]

Originally Posted by tkedch

Here you go, just change the reg below, that gave me 5 or 4.8 (in reality).
[HKEY_LOCAL_MACHINE\SOFTWARE\ArcSoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"Wap2SendLimit1"=dword:00019000
"Wap2SendLimit2"=dword:00032000
"Wap2SendLimit3"=dword:0004b000
"Wap2RecvLimit1"=dword:00019000
"Wap2RecvLimit2"=dword:00032000
"Wap2RecvLimit3"=dword:0004b000
"Wap1SendLimit1"=dword:00019000
"Wap1SendLimit2"=dword:00032000
"Wap1SendLimit3"=dword:0004b000
"Wap1RecvLimit1"=dword:00019000
"Wap1RecvLimit2"=dword:00032000
"Wap1RecvLimit3"=dword:0004b000
"Wap1RecvCount"=dword:00000003
"Wap2RecvCount"=dword:00000003
"Wap2SendCount"=dword:00000003
"Wap1SendCount"=dword:00000003

Change wap2recvlimit3 and wap2sendlimit3 to 5000000 or whatever number you like under decimal, NOT HEX. then you should be able to see under mms options that the third selection will be changed to 4.xmb.

thanks a mill that did the trick

[f1n3st]

im trying to activate this phone over to my little brothers account, when i call up to sprint and try to do it the CS person tells me to punch in some numbers that have ## in the beginning and it doesnt do anything, i think the reason why is because im using energys rom. is there a different way of getting into the ##778# settings without flashing my rom back to the stock?

[cmajewsk]

Originally Posted by mabbott

lol, woops! Totally missed it. Only thing is though, I don't have an active data connection going... maybe it's the same thing, maybe not. I'll try his fix and see what I can find out.

Edit: Yeah, it's still happening despite making the aforementioned resolution.

Hmmm...well that fix totally worked for me! Here it is if you want to import the setting...

[cmajewsk]

Originally Posted by f1n3st

im trying to activate this phone over to my little brothers account, when i call up to sprint and try to do it the CS person tells me to punch in some numbers that have ## in the beginning and it doesnt do anything, i think the reason why is because im using energys rom. is there a different way of getting into the ##778# settings without flashing my rom back to the stock?

Yes, install the Sprint provisioning cab. You can do this all with the ROM. Go to Start>>Tools>>Carrier Provisioning and select Sprint when the app opens. It'll install a cab, and they you'll have to soft-reset. By then you should be able to run ##778# and get into EPST.

[Riptide9]

Originally Posted by cmajewsk

Yes, install the Sprint provisioning cab. You can do this all with the ROM. Go to Start>>Tools>>Carrier Provisioning and select Sprint when the app opens. It'll install a cab, and they you'll have to soft-reset. By then you should be able to run ##778# and get into EPST.

Here is a cab that gives you short cuts to the EPST tools. Even without running provisioning.

[bobbyblack]

Whaz up people... Well, I posted this before a couple weeks ago and got little response. But I not sure if it's just my phone ( Its been with the 4 last upgrades ) or you guys haven't notice.... But the caller I.D. don't work, far as telling you the state from which the call was make. Tried Saumaun extended area code, and nothing at all. So if anybody know or have a fix... Can you give me a shout, I"ll give thanks and thanks ahead of time.

[KIOWA69]

Originally Posted by bobbyblack

Whaz up people... Well, I posted this before a couple weeks ago and got little response. But I not sure if it's just my phone ( Its been with the 4 last upgrades ) or you guys haven't notice.... But the caller I.D. don't work, far as telling you the state from which the call was make. Tried Saumaun extended area code, and nothing at all. So if anybody know or have a fix... Can you give me a shout, I"ll give thanks and thanks ahead of time.

try this one and see if it works for you.