[ROM] [02/21/10] Juicy R10 (21892.5.0.89) [Sense UI 2.5.2012] [XDA UC] - Page 31

**CovKid66** · #**301** (**permalink**) 11-02-2009, 02:17 PM

Quote:

Originally Posted by RKnight

YES ..... does that actually make a diffrence?

I believe so...for CDMA users. I had the exact same issues on my stock TP2. The unfortunate part was that uninstalling it did not resolve the dialer problems. I had to hard reset! I knew it was down to Advanced Config for two reasons. First, it was probably the only thing I did not reinstall after the hard reset. Second there were others posts I found on PPCG outlining the same problems for CDMA users!

I seem to recall reading that Advanced Config was originally designed for GSM devices. If you can, perhaps wait for Juicy R2 as that will be the same as hard resetting anyway.

EDIT: I just found this post:

http://forum.ppcgeeks.com/showpost.p...4&postcount=16

From this thread:

http://www.ppcgeeks.com/forums/showthread.php?t=87228

See if that 'saves the day'.

mjodotcom · #**302** (**permalink**) 11-02-2009, 02:28 PM

A minor thing, I know...but how do I change the date formating on my email such that it follows the Us Month/Day/Year format as opposed to Date/Month/Year?

ChrisCicc · #**303** (**permalink**) 11-02-2009, 03:07 PM

Quote:

Originally Posted by mjodotcom

A minor thing, I know...but how do I change the date formating on my email such that it follows the Us Month/Day/Year format as opposed to Date/Month/Year?

Check the "locale & text" options under settings.

ChrisCicc · #**304** (**permalink**) 11-02-2009, 03:08 PM

Quote:

Originally Posted by Deimoss

Same issue here. It constantly goes from my State weather to city weather, then it all of a sudden updates me in the city next over. Which like you said , dosent vary much in terms of degree temperature wise, but I have tried ROMS with an accurate GPS lock for the Weather straight off a fresh hard reset boot. Don't know what the issue is Juicy im sure is looking into it

The reason it's likely jumping from location to location is because outdoors it will use GPS, but indoors the far less accurate tower triangulation is used. I've been using it in the Boston area and it works perfectly.

RKnight · #**305** (**permalink**) 11-02-2009, 03:11 PM

Quote:

Originally Posted by CovKid66

I believe so...for CDMA users. I had the exact same issues on my stock TP2. The unfortunate part was that uninstalling it did not resolve the dialer problems. I had to hard reset! I knew it was down to Advanced Config for two reasons. First, it was probably the only thing I did not reinstall after the hard reset. Second there were others posts I found on PPCG outlining the same problems for CDMA users!

I seem to recall reading that Advanced Config was originally designed for GSM devices. If you can, perhaps wait for Juicy R2 as that will be the same as hard resetting anyway.

EDIT: I just found this post:

http://forum.ppcgeeks.com/showpost.p...4&postcount=16

From this thread:

http://www.ppcgeeks.com/forums/showthread.php?t=87228

See if that 'saves the day'.

Great thanks allot the "SuspendResume777" Cab fixed the issue.

fryjr82 · #**306** (**permalink**) 11-02-2009, 03:34 PM

Ok I finally got my MMS for Verizon working with Juicy!

You just need to follow these directions:

http://forum.ppcgeeks.com/showthread...36#post1289936

But you have to use Arcsoft MMS for Verizon instead:

http://forum.ppcgeeks.com/showthread...ht=verizon+mms

#9 and #10 posts has the account information.

wphend00 · #**307** (**permalink**) 11-02-2009, 03:38 PM

Crazy question.... where is the build with TF2.5?
Also... why am I unable to download from rapidfile share... it continually prompts me to go to a premium account, despite the fact that I have not downloaded anythnig from there today...