H|July 4|.¸¸.·´¯`·.¸¸. Energy .¸¸.·´¯ 6.5|21916 / 6.5.X|29022 * Sense 2019

[ayesha786]

I really loved this rom but unfortunately, it was too unstable. it would work and not work as it pleased and i'd have to hard reset over n over n over. I wish it had worked cuz I loved it but I have to give up now Hope more stable roms come out in the future..&& thankyou because it was quite a splendid rom had it worked fine

[RoninB]

Does the ## codes work on these ROM or is there a patch for that?

[Jasper988]

I have the new MaxSense UI and I have an issue with answering call. When I slide to answer the call, it sometimes won't connect and I will have to call that person back. Anyone know what's wrong?

[joeblow789]

Originally Posted by expectafight

Flashed to 24631 Dinik from 23128 Titanium for a change of pace...I've run into a number of issues...

1) My keyboard and all hardware button stops working if the phone gets hot (phone gets hot if I'm on the speakerphone for more than 45 Minutes). In addition to this, when I hit the power button, the screen doesn't really shut off. It just shows a black screen (the backlight is still on).

2) The GPS isn't very accurate in maps. I can't get the location accuracy to be less than 150 Meters in Google Maps, even after getting 7+ satellites.

3) Picture messaging is a little weird. I can receive but not send. When I do receive a picture mail, it wipes out all incoming text messages that I have received (just as weird as it sounds) up to that point.

4) After starting a call and putting the phone to my face, the screen shuts off, as it's supposed to. However, if i need to use the keypad in the dark (edit: outside at night also), the screen will shut off as I type, almost instantaneously. Sequence: Press the power button, touch the keypad button, touch a number, screen goes off.

Thats all i have for now.

There are known hardware issues with the TP keyboard, loose ribbon cable, google will yield more info, may be related to your screen issue. I don't do MMS, so no help there. Also, see below about Task 29.

Originally Posted by ayesha786

I really loved this rom but unfortunately, it was too unstable...

Originally Posted by Jasper988

...When I slide to answer the call, it sometimes won't connect and I will have to call that person back. Anyone know what's wrong?

To everyone having issues, if you used Task 29 first, say so. If not, try it & see if your problems persist.
http://forum.ppcgeeks.com/showthread.php?t=121736

Originally Posted by RoninB

Does the ## codes work on these ROM or is there a patch for that?

The ## codes only work if you search this thread

[Jasper988]

I ran task29 and my phone is in the 3 color screen stage but it doesn't connect with active sync on my computer so I'm unsure how to flash it. Any ideas?

What I did
1. Downloaded and ran Task29 w/ splash screen
2. Ran Romudateutility from that folder
3. Power+power down+reset button at bottom

and now... i'm stuck. I connect to computer but Activesync doesn't recognize my device.

Couldn't find anything in the posted thread. Do I just connect my phone in the 3 bar stage to my comp (using USB) and run the ROM even though active sync is not connected to my device?

Help!! =(

[frizzlefry]

Originally Posted by Jasper988

I ran task29 and my phone is in the 3 color screen stage but it doesn't connect with active sync on my computer so I'm unsure how to flash it. Any ideas?

What I did
1. Downloaded and ran Task29 w/ splash screen
2. Ran Romudateutility from that folder
3. Power+power down+reset button at bottom

and now... i'm stuck. I connect to computer but Activesync doesn't recognize my device.

Couldn't find anything in the posted thread. Do I just connect my phone in the 3 bar stage to my comp (using USB) and run the ROM even though active sync is not connected to my device?

Help!! =(

yes. just connect it at the "three bar stage" The display will first show "serial" then "usb" it is the ready for you to flash your rom, don't worry over activesync

[Jasper988]

Which display? The computer or the device?

Thanks for the help!

[jkpsaras]

Originally Posted by Jasper988

Which display? The computer or the device?

Thanks for the help!

The Device's Display.

[l0gikal]

For the MaxSense roms, does it matter if I use the 21914 build vs the 24631 build? I know 21914 is supposed to be a little more stable, but with Maxsense, does that still imply?

[joeblow789]

Maxsense is just a modified HTC Sense, like Cookie, so 21xxx vs 24xxx doesn't matter except for your personal preference. I personally prefer 21xxx, but I'm not normal.