H|July 4|.¸¸.·´¯`·.¸¸. Energy .¸¸.·´¯ 6.5|21916 / 6.5.X|29022 * Sense 2019

[tlower]

Originally Posted by murducky

Yes my settings are for USCC. for VZR Setting go here http://forum.ppcgeeks.com/showpost.p...&postcount=827

I'll give it a shot...I really appreciate your help.

[darnell]

Originally Posted by awitt

Good Afternoon
I downloaded the 7-22 standerd version and think that I found a bug I use tflo3d if you go into the music icon then go to menu it does not allow it to open up so that you can get to options is anyone else having this problem or know of a fix thank you in advance

Originally Posted by socalz71

awitt. I am not having the problem you described. Mine seems to be working fine. Have you tried reflashing or performing a hard reset after the initial install?

Sorry cant help you more

Awitt is talking about the lower right "Menu" soft key on the music tab in TF3D. I don't know if that ever worked in any of the Rhodium manila VGA ports.

Originally Posted by steb0ne

Anyone else having a problem with music stopping while playing in the TouchFlo player?

Not having that problem. Was the little white circle spinning in the upper left corner of the Music tab when you noticed the stop? The Music tab has to finish indexing your music files before it performs well. If that was not the issue, you can check out this thread. Tons of suggestions there. Here's the one that worked for me when I had problems with music skipping even after the Music tab had indexed my music files. But the Music tab has to reindex after each soft reset and won't start the process till you open the Music tab after a soft reset. So if you soft reset, jump to Music and immediately start trying to play music it may be sluggish. I usually open the music tab after a soft reset and wait a minute before playing music.

[kkryter]

Originally Posted by ThreeFaces

It's not the ROM, it's the customization to the home screen...where the date and alarm are moved to the top of the clock. This breaks the flipping animation. When you apply background on all pages, are you also seeing the aforementioned change to the home screen? ...then, when you remove the cab, does the home screen revert back to where the date and alarm info are below the clock, which would seemingly restore the flipping animation?

I just looked and noticed that indeed, the date and alarm are at the top. This is AFTER I have removed the "show background on all tabs" program. At this point the clock isn't flipping, but it is changing and is no longer stuck half way which is what happened when the program was installed.

[allamerican2302]

Originally Posted by murducky

Then do:


After you push the reg do a soft reset. then dial *288 then try to send a MMS should work

1.) i downloaded the remove pic mail cab installed it then did a soft reset

2.) then i downloaded JD's pic mail installed and soft reset

3.) I imported the REG file soft reset

4.) i pressed *228 and send but nothing but a USCC message came up talking about i dialed the wrong number blah blah

but i think im getting progress b/c now when i try 2 send a pic it is saying message delivery failure try again?

but i just get that constantly =/

[tlower]

Originally Posted by allamerican2302

1.)
but i think im getting progress b/c now when i try 2 send a pic it is saying message delivery failure try again?

but i just get that constantly =/

I'm with ya...same problem here.

[murducky]

Originally Posted by allamerican2302

1.) i downloaded the remove pic mail cab installed it then did a soft reset

2.) then i downloaded JD's pic mail installed and soft reset

3.) I imported the REG file soft reset

4.) i pressed *228 and send but nothing but a USCC message came up talking about i dialed the wrong number blah blah

but i think im getting progress b/c now when i try 2 send a pic it is saying message delivery failure try again?

but i just get that constantly =/

I noticed from your sig you changed your radio to the sprint. you will need to check your epst settings make sure your settings are correct. (use the BAFMSL.cab attached as a fast way to get your unlock code and go to your EPST settings)

I would recommend going back to the stock radio for USCC i've had no problems with it and less of a PITA (pain in the ***) when you flash all the time you dont have to check your settings)

Before you Upgrade
Make sure to record your ESN(Hex), ESN(Dec), and MSID from the View Info > Display page.
Your MSID is your 10 digit phone number.
Record the Home SID/NID value in the View Info > Home SID/NID page.

You can also find your ESN on the back of your phone, under the battery.
View Info > Security
You must be in the Edit mode of EPST for the Security page to show up in the View Info menu.

Example
HDR AN AUTH User Id (Long) ESN(Hex)@uscc.net 11A111AA@uscc.net
HDR AN AUTH Password(Long) ESN(Hex) 11A111AA
PPP USER ID MSID@uscc.net 1112223344@uscc.net
PPP PASSWORD MSID 1112223344

Example:
If your ESN(Hex) was 11A111AA, then your HDR User Id would be 11A111AA@uscc.net and your HDR Password would be 11A111AA.
If your phone number (MSID) was 111-222-3344, your PPP USER ID would be 1112223344@uscc.net and your PPP PASSWORD would be 1112223344.

View Info > M.IP Settings
Number of Profiles: 6
Active User Profile Index: 0
MIP_MODE: Mobile IP Preferred
MIP Registration Retries: 1
MIP Registration Retry Timeout: 2000 ms
MIP Pre-Registration Timeout: 3
Mobile Node_HA Auth: Enable
Send a Registration Request: Enable
Dormant Handoff Optimizaiton: Enable


I take no responsibility for anything you do to your phone. Do at your own risk!

You might also want to install the USCC Carrier cab (see attached)

[mshnayde]

Originally Posted by kkryter

I just looked and noticed that indeed, the date and alarm are at the top. This is AFTER I have removed the "show background on all tabs" program. At this point the clock isn't flipping, but it is changing and is no longer stuck half way which is what happened when the program was installed.

Would be great to have Background on all pages work.
This is a great looking ROM and not having this function is a bummer. I hope this can be fixed.

[allamerican2302]

Originally Posted by murducky

I noticed from your sig you changed your radio to the sprint. you will need to check your epst settings make sure your settings are correct. (use the BAFMSL.cab attached as a fast way to get your unlock code and go to your EPST settings)

I would recommend going back to the stock radio for USCC i've had no problems with it and less of a PITA (pain in the ***) when you flash all the time you dont have to check your settings)

Before you Upgrade
Make sure to record your ESN(Hex), ESN(Dec), and MSID from the View Info > Display page.
Your MSID is your 10 digit phone number.
Record the Home SID/NID value in the View Info > Home SID/NID page.

You can also find your ESN on the back of your phone, under the battery.
View Info > Security
You must be in the Edit mode of EPST for the Security page to show up in the View Info menu.

Example
HDR AN AUTH User Id (Long) ESN(Hex)@uscc.net 11A111AA@uscc.net
HDR AN AUTH Password(Long) ESN(Hex) 11A111AA
PPP USER ID MSID@uscc.net 1112223344@uscc.net
PPP PASSWORD MSID 1112223344

Example:
If your ESN(Hex) was 11A111AA, then your HDR User Id would be 11A111AA@uscc.net and your HDR Password would be 11A111AA.
If your phone number (MSID) was 111-222-3344, your PPP USER ID would be 1112223344@uscc.net and your PPP PASSWORD would be 1112223344.

View Info > M.IP Settings
Number of Profiles: 6
Active User Profile Index: 0
MIP_MODE: Mobile IP Preferred
MIP Registration Retries: 1
MIP Registration Retry Timeout: 2000 ms
MIP Pre-Registration Timeout: 3
Mobile Node_HA Auth: Enable
Send a Registration Request: Enable
Dormant Handoff Optimizaiton: Enable


I take no responsibility for anything you do to your phone. Do at your own risk!

You might also want to install the USCC Carrier cab (see attached)

I think your right i will go back to the USCC radio

didnt notice that much of a difference with the sprint radio any way

ill let you knw how it goes...Thnx again

[murducky]

Originally Posted by tlower

I'm with ya...same problem here.

did you change your radio ?

[jb8lakeshow]

Originally Posted by mshnayde

Would be great to have Background on all pages work.
This is a great looking ROM and not having this function is a bummer. I hope this can be fixed.

You can "fix" this. It does this because the rom is using an "enhanced" home tab (date and alarm clock time above the clock). I think cmylxgo posted a cab to revert to the old regular home tab somewhere in this thread. If not, you can copy over the manila file yourself. I'll post it later if I get a chance.