Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team - Page 80

diamondfuel · #1 (**permalink**) 08-13-2009, 10:54 PM

Which files do I use for US Cellular?

**razorloves** · #2 (**permalink**) 08-13-2009, 11:46 PM

Quote:

Originally Posted by diamondfuel

Which files do I use for US Cellular?

the 37 version

gregpilot · #3 (**permalink**) 08-17-2009, 05:08 PM

Quote:

Originally Posted by cmonex

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.

SSPLManual.exe running on the phone before running the unlocker worked for me. I was getting the 202 connect error running the unlocker by itself after activesync established. I should point out that after you have verifed a connection established w/ activesync, and *after* running SPLManual.exe on the phone, you may need to give the PC time to recognize a new device, allow those drivers to load, then run the unlocker on your PC. I don't know if my situation was coincidence or not, when I ran SSPLManual.exe on the phone, device manager on the PC installed a new device. Activesync was already running. I think its similar when running wmodem or similar, the host PC drivers needed are different. BTW, the phone is a fairly new Alltell TP, the SPL version was 40.000.

TheSarge · #4 (**permalink**) 08-17-2009, 05:56 PM

Just wanted to let you know I have successfully unlocked my phone and flashed the 'Aurora' version of EnergyROM on there, and I love it. I tried MightyROM first, but MightyROM doesn't come with TouchFlo, so I went with EnergyROm instead. Thanks for everything, guys!

**razorloves** · #5 (**permalink**) 08-17-2009, 07:22 PM

Quote:

Originally Posted by TheSarge

Just wanted to let you know I have successfully unlocked my phone and flashed the 'Aurora' version of EnergyROM on there, and I love it. I tried MightyROM first, but MightyROM doesn't come with TouchFlo, so I went with EnergyROm instead. Thanks for everything, guys!

MightyRom does come with tf3d and titanium. Titanium is on by default. You just go to your Today settings to turn on tf3d.

richards108 · #6 (**permalink**) 09-09-2009, 12:25 PM

Quote:

Originally Posted by gregpilot

SSPLManual.exe running on the phone before running the unlocker worked for me. I was getting the 202 connect error running the unlocker by itself after activesync established. I should point out that after you have verifed a connection established w/ activesync, and *after* running SPLManual.exe on the phone, you may need to give the PC time to recognize a new device, allow those drivers to load, then run the unlocker on your PC. I don't know if my situation was coincidence or not, when I ran SSPLManual.exe on the phone, device manager on the PC installed a new device. Activesync was already running. I think its similar when running wmodem or similar, the host PC drivers needed are different. BTW, the phone is a fairly new Alltell TP, the SPL version was 40.000.

holy crap dude thank you so u so much for posting this i have been trying to figure out the same error 202 forever now and it just processed at %100. i was running the new verizon firmware 40.00 as well

Pirtle36 · #7 (**permalink**) 08-19-2009, 12:39 PM

I am trying to go back to the sprint stock rom and relock my device. I used the relocker and it still allowed me to change the rom. The tri-bar colored screen still said security unlocked. Can you tell me what I did wrong?

**razorloves** · #8 (**permalink**) 08-19-2009, 05:05 PM

Quote:

Originally Posted by Pirtle36

I am trying to go back to the sprint stock rom and relock my device. I used the relocker and it still allowed me to change the rom. The tri-bar colored screen still said security unlocked. Can you tell me what I did wrong?

Well, first you want to flash the SHIPPED updated sprint rom here http://forum.ppcgeeks.com/showthread.php?t=42741
After you have successfully done that, then you can lock it using the relocker file in post 1.
It ALWAYS says Security Unlocked on the bootloader (tri-color) screen. You have to look at the spl version on the bootloader screen to tell if it's locked or unlocked.
0.37.0000 = locked
0.37.cmonex = unlocked

secarpa · #9 (**permalink**) 08-20-2009, 08:44 AM

Hi m8´s

For HTC P4350 PRO is Verizon_HSPL_Package?

thanks

**razorloves** · #10 (**permalink**) 08-20-2009, 08:58 AM

Quote:

Originally Posted by secarpa

Hi m8´s

For HTC P4350 PRO is Verizon_HSPL_Package?

thanks

I don't think there's any such thing as a P4350 Pro. The P4350 is a GSM phone. The stuff in this thread is for the Touch Pro CDMA phone. If you have the P4350, then go here for all you need http://forum.xda-developers.com/forumdisplay.php?f=349