Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[razorloves]

Originally Posted by Delwayne15

Im getting the Athena Wrapper error when trying to download from vista can anyone Help

Other people in this thread have had the same problem, try redownloading it and saving it to your computer. Also, make sure you have followed the "Preparations" in the first post.

[Van G]

Trying to unlock Telus Herman using 0.37. Keep getting Error 202. Similar to a few posts here I've followed the suggestions given to them but no go yet.

I get all the way to the point that it is attempting to update and then gives me Error 202: Connection.

A/V is disabled
I have current .Net on WinXP
I removed Exchange sync settings in MSAS
MSAS is connected and NOT sync'ing


Solution: Post 456

Originally Posted by cmonex

UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)


CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!

SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!

there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).

1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.

2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.

3. 0.35 for Verizon touch pro's ONLY.


Important:

first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!


preparations before flash:

1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).


instructions:

1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.

NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.

NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.

NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.

--------------------------------------------------------------------------

Finally, Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!!

it still looks the same where is wm 6.5 sorry im new at this

[razorloves]

Originally Posted by jdogg10791

it still looks the same where is wm 6.5 sorry im new at this

hey there and welcome to ppcgeeks.
unlocking your phone does not install WM6.5 on your phone. don't know where you got that idea. unlocking just allows you to flash any of the custom roms here http://forum.ppcgeeks.com/forumdisplay.php?f=68

[SRX8o7]

I unlocked my phone just now because im trying out a different ROM, it says that it was complete and I did recheck the tricolor screen for ".37.CMONEX" and it is there. When I go to start flashing my new ROM, it still says that I have the MIGHTYROM6 in the RUU, is that normal or should it not say that?

[psycho_maniac]

Originally Posted by SRX8o7

I unlocked my phone just now because im trying out a different ROM, it says that it was complete and I did recheck the tricolor screen for ".37.CMONEX" and it is there. When I go to start flashing my new ROM, it still says that I have the MIGHTYROM6 in the RUU, is that normal or should it not say that?

Yes thats normal BUT im going to assume you mean when you are loading the RUU and it goes to the part where you click update rom and it shows what previous version you have BUT if it shows mr6 on there it would of already been unlocked

[SRX8o7]

Originally Posted by psycho_maniac

Yes thats normal BUT im going to assume you mean when you are loading the RUU and it goes to the part where you click update rom and it shows what previous version you have BUT if it shows mr6 on there it would of already been unlocked

Yes thats what I meant. Thanks alot for the confirmation ^^

[Fyras]

I just tried to use the HPL unlocker, and had it all setup as instructed, but when it went to the tri color screen the connection failed, and I'm not sure what to do now.... help please?

[razorloves]

Originally Posted by Fyras

I just tried to use the HPL unlocker, and had it all setup as instructed, but when it went to the tri color screen the connection failed, and I'm not sure what to do now.... help please?

What error number are you getting? try this. click on Start-Settings-Connections-USB to PC, then uncheck the box under Activesync

[KayoticZ]

Hello I am going to purchase a brand new HTC TP from ebay which will be used with the carrier verizon wireless. I read that the ROM is low and reading this thread, adding a custom ROM is going to make things better/faster. Are there any pros/cons to flashing rom?(i am a noob and dont know about flashing, but read a bit about it.) I just dont want my phone to be messed up in the end and not able to use it. Please, i need help [: