Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[Scrotum]

Sorry I didnt read through all of the posts, is the relocker working? I had previously read that there were problems with it, but have to relock my phone to turn it in for a replacement.


I'm drunk and dont feel like reading, was watching the cowboys game but it hurt too much and I couldt go on any further.

[puff]

Originally Posted by Scrotum

Sorry I didnt read through all of the posts, is the relocker working? I had previously read that there were problems with it, but have to relock my phone to turn it in for a replacement.


I'm drunk and dont feel like reading, was watching the cowboys game but it hurt too much and I couldt go on any further.

Yes. It should work just fine.

If you should have any issues, please report them with as many details as possible!

[rjayorate]

Originally Posted by saumaun

Have you tried going in to bootloader mode and running the relocker?

Originally Posted by puff

that wont work, you can't flash bootloader directly from bootloader mode
did u try hard reset and make sure advanced network functionality is disabled...

phone will NOT boot o/s.
phones capable of only bootloader mode, and touchpro boot screen (one with red lettering)

i also have no radio, so that may play a role in it. i cannot run a radio rom.
everything gets stuck at 0%

[kdj67f]

Can anyone confirm or deny the ability to flash the relocker from the SD card?

[puff]

Originally Posted by rjayorate

phone will NOT boot o/s.
phones capable of only bootloader mode, and touchpro boot screen (one with red lettering)

i also have no radio, so that may play a role in it. i cannot run a radio rom.
everything gets stuck at 0%

does your bootloader show cmonex? if not, you need to flash the shipped stock ROM...

[puff]

Originally Posted by kdj67f

Can anyone confirm or deny the ability to flash the relocker from the SD card?

a solution to flash SPL from SD Card does not exist at this time afaik, you can flash radios and roms once you are unlocked, however to unlock (or relock) your device at this time, you will need a usb connection and to follow directions in post #1

Originally Posted by no2chem

(reserved for SD Card edition)

[ksann]

VZW TP here.

Could not get it ot work on my Vista64 machine, so tried it on my XP laptop, worked first time. Got the tri-color screen, showed the correct version, then phone rebooted.

How can I verify that it 'took'? I cannot get back to the tri-color screen (repeatedly tried holding down 'power=volume-down', and all that it does is want to turn the darn thing off.


Newbie here, just lost my phone virginity last night.

Thanks guys, donation will be following.


ken

[kdj67f]

Originally Posted by puff

a solution to flash SPL from SD Card does not exist at this time afaik, you can flash radios and roms once you are unlocked, however to unlock (or relock) your device at this time, you will need a usb connection and to follow directions in post #1

Thats all I needed to know. Thanks. Hopefully if I send my phone back they won't notice the unlocked SPL!

[puff]

Originally Posted by ksann

VZW TP here.

Could not get it ot work on my Vista64 machine, so tried it on my XP laptop, worked first time. Got the tri-color screen, showed the correct version, then phone rebooted.

How can I verify that it 'took'? I cannot get back to the tri-color screen (repeatedly tried holding down 'power=volume-down', and all that it does is want to turn the darn thing off.


Newbie here, just lost my phone virginity last night.

Thanks guys, donation will be following.


ken

to verify you must enter bootloader, you can try turning the device OFF completely then boot up and hold down the vol down and power while booting or you can leave it turned on and then press and hold vol down and power and continue to hold them AFTER you reset until you see the rainbow screen... hope that helps

Originally Posted by kdj67f

Thats all I needed to know. Thanks. Hopefully if I send my phone back they won't notice the unlocked SPL!

Find a computer to use and you can be sure

[kdj67f]

Originally Posted by puff

Find a computer to use and you can be sure

Thats why it needs to go back for repairs, broken USB port!