PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   [CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference! (http://forum.ppcgeeks.com/showthread.php?t=114400)

merkk 06-23-2010 08:33 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by demonlordoftheround (Post 1833392)
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.1-update1; en-us; AOSP on XDANDROID MSM Build/ECLAIR) AppleWebKit/530.17 (KHTML, like Gecko) Version/4.0 Mobile Safari/530.17)

Hold the red end button until a menu pops up. Then select turn off phone.

thanks, i tried that before but it didn't work. Just tried it again and it worked - or rather it made the phone reboot. Is there any way to get it to actually power off? Rather do that then pull the battery while it's actually on if possible.

thanks!

defiantone 06-24-2010 10:07 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
with the 6/23 version..cant get to the apn..to set up data..
any fixes..

Reefermattness 06-24-2010 12:49 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by defiantone (Post 1834396)
with the 6/23 version..cant get to the apn..to set up data..
any fixes..

You should be able to skip setup the first time around and still get into your settings.

overmelho 06-24-2010 01:39 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I'm registered on network(Sprint) and still no 3G/Internet connection. I've waited about 30 minutes. Wifi also wont start up. Any Ideas? On a side note, this build is VERY fast! Thanks!

Reefermattness 06-24-2010 01:41 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by overmelho (Post 1834906)
I'm registered on network(Sprint) and still no 3G/Internet connection. I've waited about 30 minutes. Wifi also wont start up. Any Ideas? On a side note, this build is VERY fast! Thanks!

Did you check the FAQ at all?

overmelho 06-24-2010 02:03 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
It just kicked in. Thanks!!!!

biff6789 06-24-2010 09:37 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Why does "Market" crash Android every time I use its search function?

The rest of the market works fine, it only crashes when I use the search function in Market (the magnifying glass)

Searching this thread for the word "market" came up with nothing...

I'm on the latest Sense build and have deleted data.img twice with no luck

merkk 06-24-2010 09:46 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Is there any reason to use the ext2 build? is there some advantage to having the ext2 file system? or is there something else included?

Reefermattness 06-24-2010 10:40 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by biff6789 (Post 1835949)
Why does "Market" crash Android every time I use its search function?

The rest of the market works fine, it only crashes when I use the search function in Market (the magnifying glass)

Searching this thread for the word "market" came up with nothing...

I'm on the latest Sense build and have deleted data.img twice with no luck

The Sense build is bad and buggy like that.

Quote:

Originally Posted by merkk (Post 1835972)
Is there any reason to use the ext2 build? is there some advantage to having the ext2 file system? or is there something else included?

Yeah read/write to the file system instead of just read. There are LOTS of uses for this.

madamealaina 06-25-2010 12:01 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I can't get the marketplace to work right for the life of me. I've tried all the different builds to no avail. Every time I download an app, it gets to 100%, tries to install and crashes the marketplace. I can't get anything to install. Any clues? And yes there is plenty of space for the apps to install.

Reefermattness 06-25-2010 01:02 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by madamealaina (Post 1837095)
I can't get the marketplace to work right for the life of me. I've tried all the different builds to no avail. Every time I download an app, it gets to 100%, tries to install and crashes the marketplace. I can't get anything to install. Any clues? And yes there is plenty of space for the apps to install.

hmmmm, maybe its your storage card. If you can do a full format (not a quick format) to FAT32 and try again, or use a different card. Marketplace works like a charm for me and lots of others, so that is where i would start troubleshooting.

tornadog 06-25-2010 01:55 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I am trying the 6/23 build on my Sprint TP2. It loads up fine but when I go through the setup, it says no data connection exists. On the WM side I have data connection fine.

madamealaina 06-25-2010 02:04 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by Reefermattness (Post 1837259)
hmmmm, maybe its your storage card. If you can do a full format (not a quick format) to FAT32 and try again, or use a different card. Marketplace works like a charm for me and lots of others, so that is where i would start troubleshooting.

It worked great previously. Now it just crashes every time I try to install or update something. At one point, I had changed where I wanted the apps to install. Now I can't find where I did that. It was right after that, that the market stopped working right. I think if I could find where to change the install directory again, it might start working again. I've been searching everywhere and can't find a thing!

biff6789 06-25-2010 02:33 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by Reefermattness (Post 1836072)
The Sense build is bad and buggy like that

Thanks for the reply, bud. You've been thanked :thumbleft:

Jackietreehorn 06-25-2010 05:41 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by tornadog (Post 1837360)
I am trying the 6/23 build on my Sprint TP2. It loads up fine but when I go through the setup, it says no data connection exists. On the WM side I have data connection fine.

Give this a try...

Quote:

Originally Posted by WoZZeR999 (Post 1822240)
Setting up an apn worked for me. To do so, goto 'Wireless & Networks' -> 'Mobile Networks' -> 'Access Point Names' -> Press the 'Android Key' -> Name="aaa", Server="internet.com". Hit back, and enable it. It seemed to fix it right away.

Thanks jtown for the tip!


kroewe 06-25-2010 07:08 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
jackietreehorn...lol. thats a good name
you can call me the dude

SoFocused504 06-25-2010 10:19 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Lately i been having problem with the newest builds i been getting messages like waiting for sd card repeatly...wonder if its my sd card

PropagandaX 06-26-2010 12:16 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I have to say this latest build 6/23 is pretty good. Been about a month since I have run it. Had to manual force the data to work using the apn trick. Battery use is moderate, phone runs warm. Charging seems to work (heat?). Screen seems to turn off ok (still set to auto in WM) completely. Market works. Every app I have downloaded works so far. Gps works good, google maps, etc. Screen keyboard works good but seems a little shaky, auto Hovers around 68 mb ram with task manager used. Getting close....

defiantone 06-26-2010 06:45 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by PropagandaX (Post 1838438)
I have to say this latest build 6/23 is pretty good. Been about a month since I have run it. Had to manual force the data to work using the apn trick. Battery use is moderate, phone runs warm. Charging seems to work (heat?). Screen seems to turn off ok (still set to auto in WM) completely. Market works. Every app I have downloaded works so far. Gps works good, google maps, etc. Screen keyboard works good but seems a little shaky, auto Hovers around 68 mb ram with task manager used. Getting close....

-------------------\
I can't get the 6/23 version to give me data.. back to 6/16...

AndroidTroll 06-26-2010 12:42 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I tried a few builds... but im trying to figure out whick one runs the games from the android market the best. As a example, the physics game that you shot a rag doll and try to hit a star. The game runs but slow. Is there a buikd that has hardware accelaration or no? Also... can soneone post a startup file with the overclocking command line added. 768 mhz. I want to see how it looks because I tried adding it myself and I get error messages. And I added it before the kb cmd line aswell.

emb Driver 06-26-2010 09:12 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by PropagandaX (Post 1838438)
I have to say this latest build 6/23 is pretty good. Been about a month since I have run it. Had to manual force the data to work using the apn trick. Battery use is moderate, phone runs warm. Charging seems to work (heat?). Screen seems to turn off ok (still set to auto in WM) completely. Market works. Every app I have downloaded works so far. Gps works good, google maps, etc. Screen keyboard works good but seems a little shaky, auto Hovers around 68 mb ram with task manager used. Getting close....

I agree that this build is good, but I can't get Air Control to launch, or get Urbanspoon to install properly. Anyone else have this issue?

YnYng 06-26-2010 11:45 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
dude same, urbanspoon refuses to install even though it ppl reported it working in another thread

PropagandaX 06-27-2010 12:32 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by defiantone (Post 1838673)
-------------------\
I can't get the 6/23 version to give me data.. back to 6/16...

It took me a few minutes to get it working right, had to use the trick mentioned a few posts back. Once i did it I have to back out and get back in the network setting then boom it connected.

t0mmyr 06-27-2010 01:36 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
so i tried 6/16 and 6/23 builds recently and my 3g data wont connect anymore, i have my sim card out, is there something different i need to do to get internet working via cellular? it worked well with an older cab, i think i was running 6/1 before

byrnsey88 06-27-2010 01:47 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I am having trouble making calls ever since i updates to the latest rootfs. Nobody can hear me from i am assuming my mic is not working, but I can hear them fine and they sound a little louder then normal.

vzihome 06-27-2010 05:43 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by t0mmyr (Post 1839737)
so i tried 6/16 and 6/23 builds recently and my 3g data wont connect anymore, i have my sim card out, is there something different i need to do to get internet working via cellular? it worked well with an older cab, i think i was running 6/1 before

Need to create a fake APN, name it whatever, server internet.com, save it,, activate it, get out, and surf the net. better instructions were posted some posts back.

InvincibleLiving 06-27-2010 12:16 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
I did the APN trick and it gave me ability to surf web, but when I try to access marketplace it says I have no data connection... what should I try next?

defiantone 06-27-2010 12:24 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by PropagandaX (Post 1839686)
It took me a few minutes to get it working right, had to use the trick mentioned a few posts back. Once i did it I have to back out and get back in the network setting then boom it connected.

------
thanks and you've been thanked..
however, I figured out what I was doing wrong. I had a brainfart... When I went to APN..i thought i should see the screen that comes up when you choose new or add from the settings.. Once I added it...all is well..
felt real stupid for a minute.

InvincibleLiving 06-27-2010 12:51 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by defiantone (Post 1840029)
------
thanks and you've been thanked..
however, I figured out what I was doing wrong. I had a brainfart... When I went to APN..i thought i should see the screen that comes up when you choose new or add from the settings.. Once I added it...all is well..
felt real stupid for a minute.

Can you get into Marketplace now? I still get a 'no data' msg even after doing the APN...

demonlordoftheround 06-27-2010 01:21 PM

Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.1-update1; en-us; AOSP on XDANDROID MSM Build/ECLAIR) AppleWebKit/530.17 (KHTML, like Gecko) Version/4.0 Mobile Safari/530.17)

Naut, sometimes Marketplace is down and gives a network error. What build you using? The Sense build is kind of buggy with Marketplace.

InvincibleLiving 06-27-2010 02:00 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by demonlordoftheround (Post 1840097)
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.1-update1; en-us; AOSP on XDANDROID MSM Build/ECLAIR) AppleWebKit/530.17 (KHTML, like Gecko) Version/4.0 Mobile Safari/530.17)

Naut, sometimes Marketplace is down and gives a network error. What build you using? The Sense build is kind of buggy with Marketplace.

using the most recent (6/23 EXT2). Good to see ya dude!

violentz313 06-27-2010 04:13 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Ok really hate being that guy but with this problem ive tried everything i know. I have used every other build without any issues i recently updated to the ext 2 package and now no matter what ive tried i have no data calls and sms are fine but no data period. Any help would be great this problem is new to me.

violentz313 06-27-2010 04:36 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
and just to clarify i also tried the apn trick which starts my 3g icon but as soon as i back out it shuts off again

defiantone 06-27-2010 07:42 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Quote:

Originally Posted by InvincibleLiving (Post 1840068)
Can you get into Marketplace now? I still get a 'no data' msg even after doing the APN...

---------
yes..I can get into the Marketplace.. even the gps is working better than it did with 06/16.

i_m_jughead 06-27-2010 09:07 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
i wonder when we will get the activesync calendar sych with exchange server....thats the only reason i am not using android right now

proxhack 06-27-2010 09:51 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
it works if you use sense, also you must sync and restart while connected to a computer directly connected to your network(exchange)

InvincibleLiving 06-28-2010 01:02 AM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
after trying all day to get into marketplace and sync my google contacts ect... I finally got in a few minutes ag!o. I may never know what was preventing me from getting in ALL day

fraggy4 06-28-2010 05:14 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
The gps isn't working for me, it gets my position as somewhere off the coast of Africa when in reality I'm in Massachusetts. I've got 3G working with the Verizon TP2, any help?

demonlordoftheround 06-28-2010 05:50 PM

Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.1-update1; en-us; AOSP on XDANDROID MSM Build/ECLAIR) AppleWebKit/530.17 (KHTML, like Gecko) Version/4.0 Mobile Safari/530.17)

LOL, I've had that happen. GPS locks are kinda slow. Try switching on wifi. For some strange reason, GPS is faster for me with wifi on.

fraggy4 06-28-2010 07:28 PM

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [6/23] EXT2 BUILD ADDED!
 
Yeah thanks I'll try that. Should I just go into Maps or Navigation or something with wifi on and hope for the best? :P


All times are GMT -4. The time now is 02:33 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0