[TESTING] - NAND OMGB (1.2.3)

[[ACL]]

Originally Posted by muziling

My god, flash new NBH,... my phone turn to RHOD100 again...
Does git code is the neweast?

After flash NBH, i did this

Fastboot erase recovery
Fastboot erase boot
Fastboot erase misc
Fastboot erase system
::Fastboot erase data
Fastboot erase cache
::Fastboot flash recovery recovery.img
Fastboot erase userdata
Fastboot erase TPCAL
Fastboot erase WIFI
::Fastboot reboot
Fastboot flash recovery cwm_recovery.img
fastboot boot cwm_recovery.img
pause

yup, git is latest. If this is happening then something is overwriting your nand since im double checking the variant with that value as well. LK cant overwrite this since its deep inside the mfg block near the wifi section. You doing something crazy?

[muziling]

Originally Posted by [ACL]

yup, git is latest. If this is happening then something is overwriting your nand since im double checking the variant with that value as well. LK cant overwrite this since its deep inside the mfg block near the wifi section. You doing something crazy?

Just use that commands to erase partition in fastboot.
I don't want to express out and repair my phone again.... and seem impossible to change RHOD100 to RHOD400 by NBH, Or someone can dump these partitions data, then flash back to my phone


non_writeable, but write by fastboot... OK, who can give me wifi partition data

    ptable_add(&flash_ptable, "WIFI", MTD_WFI_CDMA/0x20000,
            MTD_MISC/0x20000, 0, TYPE_APPS_PARTITION, PERM_NON_WRITEABLE);

Use http://androidforums.com/optimus-s-a...-recovery.html

[mbellot]

Full blown, old school, hard lock-up tonight.

The phone was awake (playing a game of Sudoku) when it went into space.

A couple observations that may (or may not) matter.

1. Happened shortly after booting (less than 10 minutes), the LED was still OFF, not orange or green
2. Display stayed on
3. Key backlight stayed on
4. I happened to notice right before the lock-up that it looked like I lost reception, grayed out signal meter with tiny "x" at the left side and no data icon (1x or 3G). It seemed like as soon as I got signal back (two bars, still no data icon) it froze up.

I waited twenty minutes to see if it would sleep/recover so I could pull full logs but no dice. I finally resorted to the little red button and only got last_kmsg.

If I'm reading it right, it's your old friend SMD causing a kernel panic. Hopefully these logs shed new light on the problem.

[muziling]

Originally Posted by mbellot

If I'm reading it right, it's your old friend SMD causing a kernel panic. Hopefully these logs shed new light on the problem.

Hope ACL can merge patch
59b67bdc0f06 - photon-test - testpage - Google Project Hosting

If doesn't apply this, many people told me SoD many times.

[[ACL]]

Originally Posted by mbellot

Full blown, old school, hard lock-up tonight.

The phone was awake (playing a game of Sudoku) when it went into space.

A couple observations that may (or may not) matter.

1. Happened shortly after booting (less than 10 minutes), the LED was still OFF, not orange or green
2. Display stayed on
3. Key backlight stayed on
4. I happened to notice right before the lock-up that it looked like I lost reception, grayed out signal meter with tiny "x" at the left side and no data icon (1x or 3G). It seemed like as soon as I got signal back (two bars, still no data icon) it froze up.

I waited twenty minutes to see if it would sleep/recover so I could pull full logs but no dice. I finally resorted to the little red button and only got last_kmsg.

If I'm reading it right, it's your old friend SMD causing a kernel panic. Hopefully these logs shed new light on the problem.

Yep you are right.. good ol smd. Not sure how much time ill get to spend on this but ill take a look.

[mbellot]

Originally Posted by muziling

Just use that commands to erase partition in fastboot.
I don't want to express out and repair my phone again.... and seem impossible to change RHOD100 to RHOD400 by NBH, Or someone can dump these partitions data, then flash back to my phone


non_writeable, but write by fastboot... OK, who can give me wifi partition data

    ptable_add(&flash_ptable, "WIFI", MTD_WFI_CDMA/0x20000,
            MTD_MISC/0x20000, 0, TYPE_APPS_PARTITION, PERM_NON_WRITEABLE);

Use Need a dump to build recovery. - Android Forums

Muz, which partition(s) do you want? Do you want them from fastboot or within OMGB?

In OMGB I have the following listed in /proc/mtd

cat mtd
dev:    size   erasesize  name
mtd0: 005c0000 00020000 "recovery"
mtd1: 00060000 00020000 "misc"
mtd2: 00400000 00020000 "boot"
mtd3: 0c000000 00020000 "system"
mtd4: 0e4e0000 00020000 "userdata"
mtd5: 02000000 00020000 "cache"

[muziling]

Originally Posted by mbellot

Muz, which partition(s) do you want? Do you want them from fastboot or within OMGB?

In OMGB I have the following listed in /proc/mtd

cat mtd
dev:    size   erasesize  name
mtd0: 005c0000 00020000 "recovery"
mtd1: 00060000 00020000 "misc"
mtd2: 00400000 00020000 "boot"
mtd3: 0c000000 00020000 "system"
mtd4: 0e4e0000 00020000 "userdata"
mtd5: 02000000 00020000 "cache"

Need WIFI partition data , seems can not access in android .
Fastboot can access WIFI partition, but no dump option to dump out data.

[[ACL]]

Originally Posted by muziling

Just use that commands to erase partition in fastboot.
I don't want to express out and repair my phone again.... and seem impossible to change RHOD100 to RHOD400 by NBH, Or someone can dump these partitions data, then flash back to my phone


non_writeable, but write by fastboot... OK, who can give me wifi partition data

    ptable_add(&flash_ptable, "WIFI", MTD_WFI_CDMA/0x20000,
            MTD_MISC/0x20000, 0, TYPE_APPS_PARTITION, PERM_NON_WRITEABLE);

Use Need a dump to build recovery. - Android Forums

wifi parition is unique to every device. Someone elses wont help. Go back to winmo and stop breaking your device. lol

[Jelmer]

The CID of my Rhod100:

HTC__E11 (With two __)

Thanks for the great work!

Jelmer.

[[ACL]]

Originally Posted by Jelmer

The CID of my Rhod100:

HTC__E11 (With two __)

Thanks for the great work!

Jelmer.

What KB should we map this to ? i know rhod100 has uk/de and something else right ?