PPCGeeks
Page 45 of 243 « First 354344 45 46475595145 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Windows Mobile Software (http://forum.ppcgeeks.com/forumdisplay.php?f=23)
-   -   WM 6.5 Kitchen QVGA and VGA Developer Edition (http://forum.ppcgeeks.com/showthread.php?t=54678)

cac2us 03-26-2009 02:57 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by dsi76 (Post 800056)
Here's a working QVGA SYS for 21198 (with a few things taken out for speed):

http://rapidshare.de/files/46348659/....qvga.zip.html

Thanks to Anryl for posting the original files.

Do I need a premium account to DNLD from RAPID SH ?
I wait XX sec., enter the 3 chars., hit DNLD, and then a screen pops up for 200 miliseconds & "POOF" nothing. Win XP PRO, IE8, Sys Mech8 AV, PEERGaurdian 2,
Can someone please post this file on a site that will allow an actual download to take place?
Thank You.

da_reeseboy 03-26-2009 03:17 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
I think I remember coming across another person that had an issue with ie8 and rapidshare. Do you have another browser you can use?

dan-htc-touch 03-26-2009 03:48 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
direct ftp of qvga and vga sys folders, tested and working well on my titan, kaiser, and touch pro... if rapidshare is an issue, this should not be.

All WWE, and ready to go

http://dan-vogue-titan.ppckitchen.org/21198_all.rar

mettercomputers 03-26-2009 03:54 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by dan-htc-touch (Post 801618)
direct ftp of qvga and vga sys folders, tested and working well on my titan, kaiser, and touch pro... if rapidshare is an issue, this should not be.

All WWE, and ready to go

http://dan-vogue-titan.ppckitchen.org/21198_all.rar

seem to be having a problem with 21198. my memory card not showing up and suggestions. Please help

dan-htc-touch 03-26-2009 03:59 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by mettercomputers (Post 801638)
seem to be having a problem with 21198. my memory card not showing up and suggestions. Please help
just checked my titan, saw sd card no problem, might be a driver issue, what kitchen did you use?

thvoicwethin 03-26-2009 04:00 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
I'm having trouble loading the bin file with the XIP (what is it), and also with using the new 21198 ROM. Can someone PM me some details? I'm a noob at PPCKitchen and building ROMs, except for building ones that come preloaded with the PPCKitchen software.

I'm not a total noob, just a noob at XIP and using other kitchens.

Any help would be greatly appreciated.

dan-htc-touch 03-26-2009 04:02 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by thvoicwethin (Post 801656)
I'm having trouble loading the bin file with the XIP (what is it), and also with using the new 21198 ROM. Can someone PM me some details? I'm a noob at PPCKitchen and building ROMs, except for building ones that come preloaded with the PPCKitchen software.

I'm not a total noob, just a noob at XIP and using other kitchens.

Any help would be greatly appreciated.
you just have to had a line in your devicebases txt that points to the new xip, and a buildbases txt with the matching buildid for that xip, look at how current are set up, and clone the setup to a new build, or head to chat.freenode.net 6667 #ppckitchen, I am there alot, and can help with ppckitchen woes

dsi76 03-26-2009 04:25 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by cac2us (Post 801511)
Do I need a premium account to DNLD from RAPID SH ?
I wait XX sec., enter the 3 chars., hit DNLD, and then a screen pops up for 200 miliseconds & "POOF" nothing. Win XP PRO, IE8, Sys Mech8 AV, PEERGaurdian 2,
Can someone please post this file on a site that will allow an actual download to take place?
Thank You.
Should work, just select Free and wait the 45 seconds or so, until a Download link pops up.

Tplane37 03-26-2009 04:40 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Dan:

Did you get the "Acces to *.dsm denied" error in PPCK? I just DLed ur files and have not tested them. But that is where I got hung up on 21195 and 21198. If so, how did you get around it/fix it? It looks to be in <SYS_21198_Common> but I am not sure. I have verified that there is no request for the file in my <option.xml>. Basically, I am lost and have been looking around for a way to correct the issue, with no luck obviously.

Had the same error for 21193, but all I had to do was copy the *.dsm file manually from <orig_*> to <*temp> in my Aplications Data folder. But in 21195 and 21198, the requested *.dsm is not on my PC anywhere (And do you know how long it takes to use the "Search" function on 6 TB???? A LONG time!)

dan-htc-touch 03-26-2009 05:05 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by Tplane37 (Post 801771)
Dan:

Did you get the "Acces to *.dsm denied" error in PPCK? I just DLed ur files and have not tested them. But that is where I got hung up on 21195 and 21198. If so, how did you get around it/fix it? It looks to be in <SYS_21198_Common> but I am not sure. I have verified that there is no request for the file in my <option.xml>. Basically, I am lost and have been looking around for a way to correct the issue, with no luck obviously.

Had the same error for 21193, but all I had to do was copy the *.dsm file manually from <orig_*> to <*temp> in my Aplications Data folder. But in 21195 and 21198, the requested *.dsm is not on my PC anywhere (And do you know how long it takes to use the "Search" function on 6 TB???? A LONG time!)
hmm, can't say I've ever had that issue, I would guess it's permissions related

Getitnowmarketing 03-26-2009 05:41 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by Tplane37 (Post 801771)
Dan:

Did you get the "Acces to *.dsm denied" error in PPCK? I just DLed ur files and have not tested them. But that is where I got hung up on 21195 and 21198. If so, how did you get around it/fix it? It looks to be in <SYS_21198_Common> but I am not sure. I have verified that there is no request for the file in my <option.xml>. Basically, I am lost and have been looking around for a way to correct the issue, with no luck obviously.

Had the same error for 21193, but all I had to do was copy the *.dsm file manually from <orig_*> to <*temp> in my Aplications Data folder. But in 21195 and 21198, the requested *.dsm is not on my PC anywhere (And do you know how long it takes to use the "Search" function on 6 TB???? A LONG time!)
Its from the option.xml (or lack thereof) in the both common & qvga . These options have a dsm in them to include or exclude the pkg mainly for welcome center, sim_tkit etc. Make sure the dsm in the option.xml actually matches whats in the sys_21198_common and sys_96DPI for ppck. In other words check the dsm and modify the option.xml as needed. Dsm is different from vga to qvga on certain items like transcriber etc and sometimes with using modded CHS resources the dsm are different from the WWE ones. Also, check the attributes on the dsm. Are they set to hidden, read only and system?? They should be set to unhidden, non read only and non system for ppck as the kitchen sets the proper attrib at the right point in the build process. I gave you the dos batch file to unhide them tplane use that one.

rainabba 03-26-2009 05:49 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by da_reeseboy (Post 800878)
If your referring to the way windows looks, thats in the today themes.
these changes were far more drastic than anything I've seen a today theme do.

rainabba 03-26-2009 05:58 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by Tplane37 (Post 801771)
Dan:

Did you get the "Acces to *.dsm denied" error in PPCK? I just DLed ur files and have not tested them. But that is where I got hung up on 21195 and 21198. If so, how did you get around it/fix it? It looks to be in <SYS_21198_Common> but I am not sure. I have verified that there is no request for the file in my <option.xml>. Basically, I am lost and have been looking around for a way to correct the issue, with no luck obviously.

Had the same error for 21193, but all I had to do was copy the *.dsm file manually from <orig_*> to <*temp> in my Aplications Data folder. But in 21195 and 21198, the requested *.dsm is not on my PC anywhere (And do you know how long it takes to use the "Search" function on 6 TB???? A LONG time!)
I dealt with that quite a bit the other day and it was one of two things. Either a module had both a file and folder of the same name when it should only have the folder. For example, mscoree.dll which is part of .Net was one that gave me trouble.

The 2nd cause is actually directly related to the first I think. If your SYS contains a module in folder form, but another kitchen has it in file form, you see this.

Ultimately I think it's because Vista freaks out when you ask it to overwrite a file with a folder of the same name. File -> File or Folder -> Folder is fine, but not one to the other.

My solution was to clean out file instances or entire modules from SYS when they existed somewhere else.

EDIT: After reading Drellisdee's response, I'm remembering another issue I had and perhaps this was what I experienced. Following are other steps I took that ultimately did the trick, though I'm not positive which did it.
  • "Take Ownership" of your temp folder. Though this should already be done, in my case it wasn't and I have no explanation (and I'm the domain admin)
  • Drop to a cmd window. CD to the \Kitchens folder, and run "attrib -H -S -R *.* /S /D" to ensure all files are visible, and writable.
  • Consider leaving the 2119x SYS folders expanded instead of archived. (Thanks to dan-htc for that tip). Things run quicker and it saves you time setting things up.

Getitnowmarketing 03-26-2009 06:08 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
1 Attachment(s)
Quote:
Originally Posted by rainabba (Post 801974)
I dealt with that quite a bit the other day and it was one of two things. Either a module had both a file and folder of the same name when it should only have the folder. For example, mscoree.dll which is part of .Net was one that gave me trouble.

The 2nd cause is actually directly related to the first I think. If your SYS contains a module in folder form, but another kitchen has it in file form, you see this.

Ultimately I think it's because Vista freaks out when you ask it to overwrite a file with a folder of the same name. File -> File or Folder -> Folder is fine, but not one to the other.

My solution was to clean out file instances or entire modules from SYS when they existed somewhere else.

EDIT: After reading Drellisdee's response, I'm remembering another issue I had and perhaps this was what I experienced. Following are other steps I took that ultimately did the trick, though I'm not positive which did it.
  • "Take Ownership" of your temp folder. Though this should already be done, in my case it wasn't and I have no explanation (and I'm the domain admin)
  • Drop to a cmd window. CD to the \Kitchens folder, and run "attrib -H -S -R *.* /S /D" to ensure all files are visible, and writable.
  • Consider leaving the 2119x SYS folders expanded instead of archived. (Thanks to dan-htc for that tip). Things run quicker and it saves you time setting things up.
Its step2. Without that the overwrite function in PPCK for duplicates will not work and you will get permission errors. Here is a bat to run from root of SYS_common & the dpi to prep the files for ppck. This will cause trouble on an ervius kitchen so bewarned.

Tplane37 03-26-2009 06:49 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by rainabba (Post 801974)
I dealt with that quite a bit the other day and it was one of two things. Either a module had both a file and folder of the same name when it should only have the folder. For example, mscoree.dll which is part of .Net was one that gave me trouble.

The 2nd cause is actually directly related to the first I think. If your SYS contains a module in folder form, but another kitchen has it in file form, you see this.

Ultimately I think it's because Vista freaks out when you ask it to overwrite a file with a folder of the same name. File -> File or Folder -> Folder is fine, but not one to the other.

My solution was to clean out file instances or entire modules from SYS when they existed somewhere else.

EDIT: After reading Drellisdee's response, I'm remembering another issue I had and perhaps this was what I experienced. Following are other steps I took that ultimately did the trick, though I'm not positive which did it.
  • "Take Ownership" of your temp folder. Though this should already be done, in my case it wasn't and I have no explanation (and I'm the domain admin)
  • Drop to a cmd window. CD to the \Kitchens folder, and run "attrib -H -S -R *.* /S /D" to ensure all files are visible, and writable.
  • Consider leaving the 2119x SYS folders expanded instead of archived. (Thanks to dan-htc for that tip). Things run quicker and it saves you time setting things up.
If Drellisdee's option doesn't work, I'll try this. Drell played a big role in getting me this far, and hasn't steered me wrong yet! But I take all the input I can get, because you never know when an issue is going to come up that very few people have come accross. :mrgreen:
Quote:
Originally Posted by drellisdee (Post 801933)
Its from the option.xml (or lack thereof) in the both common & qvga . These options have a dsm in them to include or exclude the pkg mainly for welcome center, sim_tkit etc. Make sure the dsm in the option.xml actually matches whats in the sys_21198_common and sys_96DPI for ppck. In other words check the dsm and modify the option.xml as needed. Dsm is different from vga to qvga on certain items like transcriber etc and sometimes with using modded CHS resources the dsm are different from the WWE ones. Also, check the attributes on the dsm. Are they set to hidden, read only and system?? They should be set to unhidden, non read only and non system for ppck as the kitchen sets the proper attrib at the right point in the build process. I gave you the dos batch file to unhide them tplane use that one.
I'll give that a shot. Thanks. I did notice during the 0804 to 0409 MUI switching marathon that many files were not visible in the Chinese SYS for both 21195 and 21198. I checked all my properties in my File Explorer and made sure that "View Hidden Files" and everything was selected....but I did not think to use that BAT file...thought it was for closing files, not setting permissions.

hansk75 03-26-2009 07:07 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
1 Attachment(s)
daryelv,

Here is 21198 XIP for Diamond. If you have any problem, let me know. It works OK with my device and I confirmed it is 21198.

jtuite 03-26-2009 07:28 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
3 Attachment(s)
Here is a 21198 ROM for the Verizon Vogue. from what I can see everything works. the initial boot for me seemed to take a long time so don't think it got stuck. it will say windows 6.1 on the splash screen because I didnt change it in ppc kitchen. just put the welcomehead.96.png in the windows folder to overwrite the existing one. the RUU will say something other than 21198 because I didn't edit the text files to reflect the new build. this is my first Rom using ppcgeeks kitchen. http://www.mediafire.com/download.php?oul1tuiyi0x
I will get everything fixed later. it has the vogue 6.1 dialer on it but if you want the 6.5 one just install the cab.

Tplane37 03-26-2009 07:34 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Okay, follow the link below. I have posted links to some builds for the Titan. Build 21193 I worked on from start to finish with the help of the members listed in the first post. Build 21198 I used the SYS files posted by Dan-HTC-Touch.

All of my posted builds to date use Dan-HTC-Touch's XIP's. Thanks to everyone who has helped me along the way!

Titan_2119x_Beta_x ROMS

rangness 03-26-2009 07:37 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
i put Titan_21193_Beta_1_USO_Edition_RUU on my mogul but then went back to my old rom (r4r)....but the two splash screens (boat and flag/uso) remnained...why did they stay?

if i ever have to go back to stock rom, will they go away?

jdume 03-26-2009 07:43 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by rainabba (Post 800624)
I'm now realizing that all the windows and menus had a different looks. Everything was rounded, with larger borders, and better spaced out.

How was that done?
Maby from previous builds?

lennie 03-26-2009 07:52 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
hello to the masses, my first post here. I'm using an Athena and would love to get this build running on it. but I have no clue how to port a xip....can someone please please post a ported 21198 xip for the athena? x7501?....please..... (a working rom would be fine too:mrgreen::mrgreen:)


plus I was trying to cook my first rom with build 21193 but I kept getting a imgfs signiture not found. I have not clue how to get this thing going from here. Any help would be much apreciated....

Tplane37 03-26-2009 08:01 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by rangness (Post 802194)
i put Titan_21193_Beta_1_USO_Edition_RUU on my mogul but then went back to my old rom (r4r)....but the two splash screens (boat and flag/uso) remnained...why did they stay?

if i ever have to go back to stock rom, will they go away?
If you go back to stock, yes, they will go away. If you flash another ROM made in PPCKitchens, they will also change. Most non-PPCKitchens kitchens do not change the Sub-Splash or the Carrier Splash screens. All stock builds (that I know of) do.

Bandits007 03-26-2009 08:15 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
what do I do with DCD carrier cabs?

rainabba 03-26-2009 08:17 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by Bandits007 (Post 802280)
what do I do with DCD carrier cabs?
Run the cab for your carrier.

Bandits007 03-26-2009 08:21 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Sorry if I am repeating myself but I have a Sprint Mogul .....how do I run those cab files...on my pc or on the phone itself?....sorry Im a n00b

rainabba 03-26-2009 08:33 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by Bandits007 (Post 802297)
Sorry if I am repeating myself but I have a Sprint Mogul .....how do I run those cab files...on my pc or on the phone itself?....sorry Im a n00b
I really don't mean to be rude, but just because there's a chainsaw handy and you CAN play with it, doesn't mean you should.

If you have to ask what to do with a CAB, you likely should be in a "Developer Edition" thread.

To answer your question though, a .cab is meant to be executed on the phone.

mettercomputers 03-26-2009 08:56 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by dan-htc-touch (Post 801653)
just checked my titan, saw sd card no problem, might be a driver issue, what kitchen did you use?
an-htc-touch or someone

using ppck because have not had any luck getting a os.nb.payload for my titan to use my normal kitchen. Been trying to learn xip porting but not having luck finding someone to walk me through it. Can you point me in the right direction thank you

thvoicwethin 03-26-2009 08:59 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by rainabba (Post 802317)
I really don't mean to be rude, but just because there's a chainsaw handy and you CAN play with it, doesn't mean you should.

If you have to ask what to do with a CAB, you shouldn't be in a "Developer Edition" thread.

To answer your question though, a .cab is meant to be executed on the phone.
+1

Quote:
Originally Posted by rangness (Post 802255)
Originally Posted by rangness http://67.228.199.237/forum.ppcgeeks...s/viewpost.gif
i put Titan_21193_Beta_1_USO_Edition_RUU on my mogul but then went back to my old rom (r4r)....but the two splash screens (boat and flag/uso) remnained...why did they stay?

if i ever have to go back to stock rom, will they go away?
Simple soft reset the phone, hit the reset button and let it load again. mine does it all the time with winmo 6.5 when it first boots. let it sit the 2nd time, it should come up, if not...do it one more time....

if all else fails, flash again.

rainabba 03-26-2009 09:01 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by mettercomputers (Post 802367)
an-htc-touch or someone

using ppck because have not had any luck getting a os.nb.payload for my titan to use my normal kitchen. Been trying to learn xip porting but not having luck finding someone to walk me through it. Can you point me in the right direction thank you
dan-htc might recommend: http://forum.xda-developers.com/showthread.php?t=443383

dan-htc-touch 03-26-2009 09:18 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by rainabba (Post 802377)
that's exactly what I recomend, it's what I use

MikeElGiga23 03-26-2009 10:20 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
does anyone know where we can get the new 6.5 dialer?? i have seen several 6.5 kitchens and roms but they all miss this

i have a qvga vogue

friguy3 03-26-2009 10:49 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by mike20pr (Post 802542)
does anyone know where we can get the new 6.5 dialer?? i have seen several 6.5 kitchens and roms but they all miss this

i have a qvga vogue
Im not sure there really is a "new" dialer out. Most have the older one. The screen shots you prob saw are of the password keypad to unlock your phone from the lock screen.

ankit360 03-26-2009 10:52 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
http://hi.baidu.com/sad_indulgen/blo...fe850cd53.html

jtuite 03-26-2009 10:59 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by mike20pr (Post 802542)
does anyone know where we can get the new 6.5 dialer?? i have seen several 6.5 kitchens and roms but they all miss this

i have a qvga vogue
I posted it two pages back

DavidinCT 03-26-2009 11:06 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by ankit360 (Post 802645)
Am I reading that right ? Build 5.2.21314 ? I'm only on 5.5.21198, what's with that ? ](*,)

That's just a few builds off...

da_reeseboy 03-26-2009 11:07 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by ankit360 (Post 802645)
21314???!!!!! What the ........

MikeElGiga23 03-26-2009 11:10 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by jtuite (Post 802662)
I posted it two pages back
so there is really a new 6.5 dialer? or were the pics i saw just the unlock password keypad?

may i trouble you for a screenie of the actual dialer please?

jtuite 03-26-2009 11:15 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by mike20pr (Post 802684)
so there is really a new 6.5 dialer? or were the pics i saw just the unlock password keypad?

may i trouble you for a screenie of the actual dialer please?
the dialer I posted is the one that comes with 6.5 I don't know what pic you saw. if it can't be identified as a dialer by looking at it then it was probably the unlock screen

DavidinCT 03-26-2009 11:15 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by mike20pr (Post 802684)
so there is really a new 6.5 dialer? or were the pics i saw just the unlock password keypad?

may i trouble you for a screenie of the actual dialer please?
It's got me wondering too....

daryelv 03-26-2009 11:20 PM
Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 
Quote:
Originally Posted by hansk75 (Post 802127)
daryelv,

Here is 21198 XIP for Diamond. If you have any problem, let me know. It works OK with my device and I confirmed it is 21198.
Thanks, I've never had any problems with the XIPs you post. For some reason every time I try to insert a XIP ported using xipporterex.exe my ROM never boots. Maybe it's because I do all my kitchen work on the E: drive instead of the root C:? Or I just have a bad os.nb.payload that I'm working with. I'm sure one of these days I'll have more time to figure out what I'm doing wrong.

Thanks again,
Daryel


All times are GMT -4. The time now is 02:17 AM.
Page 45 of 243 « First 354344 45 46475595145 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0