Common NAM Performance Tweaks. - Page 8

jaymark · #71 (**permalink**) 01-24-2009, 09:47 PM

always gives me an error running the program. tried running right after reboot, and in flight mode. weird.

Quote:

Originally Posted by Baffles

Grab baf msl (click "got msl?" in my sig). It uses a very similar method to get your MSL, only it is 100% automated.

Bradleyj44 · #72 (**permalink**) 02-24-2009, 11:51 AM

This actually worked miracles for me guys
Thanks again!
i changed the settings on the Mogul and it worked out well BUT THIS is highly recommmended for the TP
it's like night and day for me=D>

neelesh · #73 (**permalink**) 03-01-2009, 07:58 PM

So I am confused, is a 9 better or a 0??

dcperdue · #74 (**permalink**) 03-08-2009, 12:33 PM

Im on cricket and my acc was on 0 when ever i dialed a number it would take about 2 to 5 seconds to make the call.

I set it to 10 reset went into pst still set on 10 and when i make a call as soon as I press send it starts ringing. On 0 I would get the all networks busy crap at least once in a day. After setting mine to 10 I have never got it. I am using a diamond and a touch pro cloned with the same esn so I can use which ever one I want not at the same time of course.

**OR78** · #75 (**permalink**) 03-12-2009, 09:46 PM

Ok to better help some of you understand this: The ACCOLC is based on priority. First off, Sprint does not utilize this. Mainly it is for GSM phones. This was started in London around '05 i think after the terrorist bombings. If you are very inclined to change the number feel free to but if you are on the sprint network this will not change anything. Now that this has been said, the next thing is priority. The HIGHER the number the higher the priority, meaning 0 is the lowest. Anything higher than 9 is reserved and should not be used. 9 is the highest priority to non essential phones, meaning non emergency or gov't. It is against the law however to go above 9 on a personal phone. Hope this helps.

ablerd · #76 (**permalink**) 03-12-2009, 09:53 PM

canospinach thanks for the thread VERY HELPFUL AND INFORMATIONAL also. KEEP UP THE AWESOME JOB! followed instructions first user with that tweak but confident with the instructions from your thread did it once and updated then softrest. THANKS AGAIN!

jpruett79 · #77 (**permalink**) 04-08-2009, 10:49 AM

just out of curiosity could someone post a link to the section of the us code that makes it illegal to change to a higher number.

Jet2 · #78 (**permalink**) 04-08-2009, 11:32 PM

I have a HTC Touch, and I need to change the ACCOLC to 13, but it will only allow me to enter 0 - 9. Is there any way to change to 13?

vpr5703 · #79 (**permalink**) 04-09-2009, 05:10 PM

Quote:

Originally Posted by Jet2

I have a HTC Touch, and I need to change the ACCOLC to 13, but it will only allow me to enter 0 - 9. Is there any way to change to 13?

As said before, please use the search tool. It is illegal to change ACCOLC to anything other then 0-9 for private handsets. Im not sure how you'd go about getting permission to change it to something higher, but my guess is that if it were truly needed and you worked for a specific agency they would have given you a handset previously programmed with the correct priority ACCOLC to begin with.

**sc00b4s7eve** · #80 (**permalink**) 04-11-2009, 06:00 AM

Quote:

Originally Posted by OR78

Ok to better help some of you understand this: The ACCOLC is based on priority... The HIGHER the number the higher the priority, meaning 0 is the lowest. Anything higher than 9 is reserved and should not be used. 9 is the highest priority to non essential phones, meaning non emergency or gov't. It is against the law however to go above 9 on a personal phone. Hope this helps.

Interesting... I've always heard that 0 was reserved for emergency services and 1 was reserved for state/ gov't.
Where did you find this? Just curious.

EDIT: nevermind... you should just re-read post 1. Sorry. You got it backwards.