does anyone have any clue as to what im supposed to do with the RUU_signed.nbh file to flash my rom..phone is currently on the "SPL-1.20. Olipro" screen. thanx in advance

Ya know what? could you zip those up and place them here (or on the ftp) for others to install?

first read this short thread... http://forum.ppcgeeks.com/showthread.php?t=9782

that will tell you you need to put the nbh in the ruu folder before you run the ruu itself.

second... it sounds as if you have already flashed the rom over to the phone but are still stuck in the bootloader. with the device still attached
to pc run the 'exit bootloader program. you can find it here... ftp://ppcgeeks:ezupload@ftp.ppcgeeks...tan_exitbl.rar

just extract the file somewhere on your pc and run it.

good luck and hope this helps, cody

i downloaded the file frm the ftp area the newest one he put up on the 10th. I Then extracted the file. I ran the unlocker...at no point did it even give me the option to choose any room to flash. The whole process completed and i was at the oilpro screen. I then did some research and find a comment that some guy name ikcokeman (or something like that said) and according to him you needed to put the nbh file inot the ruu folder. so i downloded his ruu.rar file extracted it ran it with the NBH file in the folder and it was installing it. When done it said update unsuccessful there is a corruption in your file (something like that). I did it again...same shit. Thinking maybe it was the file i deleted it and downloaded again...same shit....so i tried one of his previous files (the one he put up on the 7th). Tried that one...same shit...i gave up and simply re-installed the sprint udate one that he also had in his ftp area and my phone just loaded (worked fine). So im obviously doing something wrong. pls help if you can.

Negotiator,
File corrupt errors (270) at the 100% mark are normal with the colonel's roms for now...simply use the tool cody referenced above at the end of the flash, then a hard reset, and the new rom will be there and working fine...
I must say, however, that perhaps custom beta roms may be outside your comfort zone at this time...

thanks for the update....
just one more question...when i run the "titan_exitbl" which is the tool that cody talks about it keeps giving me this message about making sure active sync is disabled or that my usb is properly connected. makes no sense. obviously my usb is connected if it just finished updating the rom...and i have gone into windows task manager and ended the mobile sync center which is what vista uses...i went into the "process" tab and ended all the active sync and windows mobile stuff in there and im still gettting this message.I also tried the "uni_exitbootloader_180" and im getting the same message...i would appreciate any help thanx

yea i have no prob doing this...but here is the prob...i cant see my windows directory when my phone is connected to my pc (VISTA) even when i enable show hidden files....
so i just copied them on to my storage card and then copied them onto my pc...but guess wat?
the files are visibly on my storage card when looking at them on the phone...but when looking at my storage card on my PC those files dont exist lol....except the appdp folder. This is making no sense to me. So i just copied the folder i put those files in onto my pc and its still blank. If you cld help me figure that one out ill gladly put the files up

Exact copy of my post at XDA (did this here too somewhere..)

Try These:

Thanx for the info...i cldnt not figure out how to get that "could not connect to usb port" message to stop showing so i ended up just using a friends laptop (Win XP) to run the "titan_exitbl" file, and it worked finally got out of that boot loader screen. Colonel the rom is great...runs great...feels like a new phone with this rom.
For anyone that has prob loading this rom its quite simply
1. Run the titan unlocker
2. It will most likely take you to the boot loader screen. Run the one of the programs available to get outta this ("uni_exitbootloader_180") if you do not wanna flash a new rom at this time, other wise simply run the Rom Utility Update (RUU) (with the new rom file to flash in the RUU folder). This will install the rom. If you are installing one of the beta roms from Colonel it might give you a 270 error message this is fine....just run the "titan_exitbl" and the phone will turn off. IF you keep getting a message about usb could not connect or something like that...disable USB connection in active sync...and if you have vista follow krayziepop instructions on how to solve this.
3. perform hard reset
4. And you are good to go

For anyone that wants java support on their phone you can download the java files uploaded by betulike2know and copy and paste them into you windows directory and you should be good to go.

I wrote this out cause this whole process was driving me crazy, figured it out and no one else should have to go thru such crazyness.

Enjoy the great rom

FYI: you can get the RUU file from the ftp area uder imcokeman's files. its called RUU.rar