3.42.50

[reekolu]

Originally Posted by gorelow

already had that rar and when i try to flash it , it only gets to 8 percent and then says it isnt compatible with my device which is a mogul. anyone else have this problem

Yes, You can't flash via USB you have to do it from your microSD card, the card must be less than 2gb and formated FAT32. Start your Mogul in bootloader mode, (hold down power and camera buttons then press reset with stylus). then just follow the prompts. If this helped you, you can thank me later...lol. the Green Button that is...

[weedahoe]

Originally Posted by reekolu

Yes, You can't flash via USB you have to do it from your microSD card, the card must be less than 2gb and formated FAT32. Start your Mogul in bootloader mode, (hold down power and camera buttons then press reset with stylus). then just follow the prompts. If this helped you, you can thank me later...lol. the Green Button that is...

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.

[lafester]

Originally Posted by weedahoe

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.

Interesting method. does it hard reset the phone?

[reekolu]

Originally Posted by weedahoe

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.

Sorry weedahoe, but I was curious to see of this method worked so I tried it on my girlfreinds Mogul. Like the previous user stated, it gets to 8% then crashes. Your method is inaffective. unless you left out some steps. READERS BEWARE

[flyers2114]

[quote=reekolu;394244]

Originally Posted by weedahoe

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.


Sorry weedahoe, but i was curious to see if this method worked so I tried it on my girlfreinds Mogul. Like the previous user stated, it gets to 8% and crashes. Your method is inaffective, unless you left out some steps. READERS BEWARE.

That is why I was asking how he came up with that method.....if it is stopping at 8% you need to revert back to 1.2....flash radio....then put back 2.4 or 2.47......that is the only way it will work that I know of via RUU....but it does cause a hard reset.....

[puff]

C:\ttn240mfg looks like the RUU directory installed by the 2.40 olipro SPL exe