3.42.50
 

anyone have a link for this radio. cant find it in the search

Re: 3.42.50
 

Re: 3.42.50
 

here it is at ppcgeeks http://forum.ppcgeeks.com/showthread...=radio+3.42.50

Re: 3.42.50
 

already had that rar and when i try to flash it , it only gets to 8 percent and then says it isnt compatible with my device which is a mogul. anyone else have this problem

Re: 3.42.50
 

Yes, You can't flash via USB you have to do it from your microSD card, the card must be less than 2gb and formated FAT32. Start your Mogul in bootloader mode, (hold down power and camera buttons then press reset with stylus). then just follow the prompts. If this helped you, you can thank me later...lol. the Green Button that is...

Re: 3.42.50
 

If you flash it via RUU you have to name it RUU_signed.nbh. You should be able to flash it that way without a SD card. But the SD card is the quickest and easiest method.

Re: 3.42.50
 

either way you must be unlocked.

via usb you need olipro 1.2 bootloader and it will cause a hard reset.
via sd you need 2.4 or 2.47 bootloader and it will NOT cause a hard reset. this method is best for flashing radios.

Re: 3.42.50
 

You cannot use the 1.20 unlocker with these ROMs. That is an old unlocker and it is no longer compatible. He is unlocked according to his post on other threads.

Re: 3.42.50
 

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.


http://pic30.picturetrail.com/VOL149.../331850923.jpg

Re: 3.42.50
 

well personally i have not used this method but i have read about others doing it. they would flash 1.2, flash the new radio, then flash back to 2.4.

to be honest this is the first i have heard that you can use the ruu while having 2.4 installed.

using the sdcard is by far the easiest way.