3.42.50

[lafester]

Originally Posted by weedahoe

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.

Interesting method. does it hard reset the phone?

[weedahoe]

no but you do have to reboot. you have to hardreset after flashing the ROM

[flyers2114]

It can be flashed via RUU as long as you revert back to 1.2.....but it will cause a hard reset also.......
Also after seeing Weedahoe's method I would definetely try that as opposed to reverting back even though there is no harm.....a few less steps though....

Weed does it hard reset it?......Very interesting way of doing it.....how did you come up with that way.....

But in my opinion the easiest way is SD card.....takes about 2 minutes and no hard reset....

[flyers2114]

[quote=reekolu;394244]

Originally Posted by weedahoe

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.


Sorry weedahoe, but i was curious to see if this method worked so I tried it on my girlfreinds Mogul. Like the previous user stated, it gets to 8% and crashes. Your method is inaffective, unless you left out some steps. READERS BEWARE.

That is why I was asking how he came up with that method.....if it is stopping at 8% you need to revert back to 1.2....flash radio....then put back 2.4 or 2.47......that is the only way it will work that I know of via RUU....but it does cause a hard reset.....

[puff]

C:\ttn240mfg looks like the RUU directory installed by the 2.40 olipro SPL exe

[reekolu]

Originally Posted by weedahoe

I beg to differ Sir. It can be done via USB as that is how I did mine. I couldnt do mine via SD card because I didnt wanna format my card to FAT32 at the time.

You do need Olipro 2.4 and after it is installed and your phone is upgraded with it simply go to C:\ttn240mfg and change the name of Hard_MFG_SPL_2.40_RUU_signed.nbh to Hard_MFG_SPL_2.40_RUU_signed.nbh.old and copy TITAIMG.nbh into that directory and then run the RUU.

Sorry weedahoe, but I was curious to see of this method worked so I tried it on my girlfreinds Mogul. Like the previous user stated, it gets to 8% then crashes. Your method is inaffective. unless you left out some steps. READERS BEWARE

[weedahoe]

Hey, Im just telling you how I did it.

At any rate, when I was new to this and was reading freaking everything everywhere I ran into thet by member c3327101 called XV6800 Upgrade sequence and followed some of these directions.

What you guys are looking for exactly though is in STEP 2
************************************************** ******************************************
STEP TWO
In the Hard SPL directory find this file, Hard_MFG_SPL_2.40_RUU_signed.nbh. rename or move it.
I just add a .DONE extension so the RUU won’t find it.
Extract this radio, Titan_radio_rom_3.42.40.zip and place the TITAIMG.nbh in the Hard SPL directory.
http://forum.ppcgeeks.com/showthread...om_3.42.40.zip
Run ROMUpdateUtility.exe from the same HardSPL directory, following the prompts until it says Finish.
This updates your radio on your phone
************************************************** ******************************************

This is what I did and how I did it.

[charleskincade]

I'm sorry guys, I just bought another 1gig sd card, formatted it, loaded the file, placed phone in bootloader and stile no file image found! I'm done with this, I don't care about the hard reset so can anyone give me the original file so I can do this the old fashioned way... thanks!

[TweetyBear]

did you format to FAT32? and made sure the bootloader was Olipro 2.40? and renamed file to titaimg.nbh?

[charleskincade]

I did all of that