3.16.651.0 IS real, and so is GPS - Link inside - NOT official release

[rmancl]

there are many posts saying its working and a couple of ideas on what to do to make it work but no actual steps. so here is what I did:

!!!!before you start backup your data or move it off the phones memory (storage card will not be effected). also record your A-key if you have it. go to dialer and type ##778 dial. choose view, goto view info on bottom left, then choose a-key. Mine was blank but certain areas have one programmed in. and thats it.

1. Download a) New unlocker b) 3.27 radio c)dcd 2.0 beta (verizon) all downloads referenced in dcd's first post in this thread: http://forum.xda-developers.com/showthread.php?t=362566

2. Run and install unlocker... i used the .bat file...follow instructions exactly
Note: other than unlocking the phone it does not erase anything or make you lose any settings.

3.Run and install Radio rom... just run the "romupdateutility.exe" that is in the down load.

after installing the radio your phone resets and will not boot past verizon screen, this is NORMAL

4. restart phone into boot loader by holding down the Power and Camera buttons, then, reset the phone with the button on the bottom. this will bring you to the tri color screen

5. Run and install the dcd 2.0 beta rom. Even though the instructions say to make sure you activesync first don't worry about this. It will install and restart your phone.

6. program your phone by doing *228 and choosing option 1. after this you will be able to get online but may not be able to make phone calls. Again don't worry this is Normal.

7. this is where things may be different. When i tried to make an out bound phone call i got a verizon message that my phone could not be authinticated. Previous posts indicated that i would need to call to get my A-key. I called verizon and all they had to do was refresh the authintication in their system and it began to work properly. In your area you may need the A-key. set the a key the same way you viewed it earlier but choose edit instead of view. the password is 000000

8. now the fun part GPS!!!!!!
go to your dialer screen and choose menu at the bottom right and then choose options. Goto the services tab and do Get Settings for Location Setting. change option to location NOT 911 only.

8a. Install the GPS application of your choice...google maps works perfect.
8b. In google maps goto menu and choose to use gps. Give it up to 30 minuntes in a window or outside and voila gps working.

Sorry for the lengthy post but I hope it helps people get this done properly and with a little more confidence.

special thanks to all those who figured this stuff out especially dcd and kmartburrito for supplying the rom and proting it over to verizon. also to ImCokeMan for the unlocker. I didn't figure all this out on my own, i just put it in one place.

[rwspark]

Originally Posted by rmancl

there are many posts saying its working and a couple of ideas on what to do to make it work but no actual steps. so here is what I did:

!!!!before you start backup your data or move it off the phones memory (storage card will not be effected). also record your A-key if you have it. go to dialer and type ##778 dial. choose view, goto view info on bottom left, then choose a-key. Mine was blank but certain areas have one programmed in. and thats it.

1. Download a) New unlocker b) 3.27 radio c)dcd 2.0 beta (verizon) all downloads referenced in dcd's first post in this thread: http://forum.xda-developers.com/showthread.php?t=362566

2. Run and install unlocker... i used the .bat file...follow instructions exactly
Note: other than unlocking the phone it does not erase anything or make you lose any settings.

3.Run and install Radio rom... just run the "romupdateutility.exe" that is in the down load.

after installing the radio your phone resets and will not boot past verizon screen, this is NORMAL

4. restart phone into boot loader by holding down the Power and Camera buttons, then, reset the phone with the button on the bottom. this will bring you to the tri color screen

5. Run and install the dcd 2.0 beta rom. Even though the instructions say to make sure you activesync first don't worry about this. It will install and restart your phone.

6. program your phone by doing *228 and choosing option 1. after this you will be able to get online but may not be able to make phone calls. Again don't worry this is Normal.

7. this is where things may be different. When i tried to make an out bound phone call i got a verizon message that my phone could not be authinticated. Previous posts indicated that i would need to call to get my A-key. I called verizon and all they had to do was refresh the authintication in their system and it began to work properly. In your area you may need the A-key. set the a key the same way you viewed it earlier but choose edit instead of view. the password is 000000

My stock rom didn't have the AKEY and it works just fine. I upgraded to the 2.0 beta (verizon) rom and it still had the correct MDN and MSID. But when I dial *228 it says that feature code is not available on the network.

Any ideas?

[rmancl]

Originally Posted by rwspark

My stock rom didn't have the AKEY and it works just fine. I upgraded to the 2.0 beta (verizon) rom and it still had the correct MDN and MSID. But when I dial *228 it says that feature code is not available on the network.

Any ideas?

that is weird, *228 is verizon over the air programing number. Are you in a good verizon area or is it possible you are roaming? I know sometimes when i travel i am unable to use *228 option 2 because (roaming update) i can't connect to a verizon tower.

[rwspark]

Originally Posted by rmancl

that is weird, *228 is verizon over the air programing number. Are you in a good verizon area or is it possible you are roaming? I know sometimes when i travel i am unable to use *228 option 2 because (roaming update) i can't connect to a verizon tower.

I was thinking the same thing. I'll have to flash it again and try it in another area.