Omnia Hacks / Tips / Tricks - Page 24

**syrguy1969** · #1 (**permalink**) 05-29-2009, 05:23 PM

I think that is in reference to the front camera for video calls. It was removed fron the i910 (the i900 has one), but since VZW doesn't support video calling anyway, it isn't really that big of an issue for most.

**Adrynalyne** · #2 (**permalink**) 02-12-2009, 12:20 PM

Follow the instructions. Copy it to \Windows, overwriting the one already there. Its not meant to be executed by you.

**Adrynalyne** · #3 (**permalink**) 02-13-2009, 05:46 PM

To further add to finger friendliness:

http://forum.xda-developers.com/showthread.php?t=459125

Version 1.10 works without a hitch for me so far.

**syrguy1969** · #4 (**permalink**) 02-13-2009, 06:10 PM

I have had my eye on this for a bit...any conflicts with Shell (your using Shell, aren't you?) or any other 'Omnia'-friendly app we use?

**kyrumo** · #5 (**permalink**) 02-13-2009, 09:08 AM

I really thought the Omnia would have been so much further along as far as unlocking and rom developement

**Adrynalyne** · #6 (**permalink**) 02-13-2009, 11:15 AM

Quote:

Originally Posted by kyrumo

I really thought the Omnia would have been so much further along as far as unlocking and rom developement

A ROM has to be released first.

asctony · #7 (**permalink**) 02-13-2009, 04:02 PM

Quote:

Originally Posted by kyrumo

I really thought the Omnia would have been so much further along as far as unlocking and rom developement

Go here to see many ROMs.
http://www.samsung-omnia.org/index.php

benjilim · #8 (**permalink**) 02-13-2009, 09:57 AM

Quote:

Originally Posted by syrguy1969

I figured I would start a thread to put all the reg settings, tweaks + tricks into one place!! I will fill in all the ones I have found in the past, but here are just a couple to start the ball rolling....feel free to contribute!!!

Screen sensitvity has been talked about a lot, and I ran across this just last night, so I haven't tried it out yet (I am waiting until I have time to work)!! As with any reg setting, I suggest doing a backup first, or keeping the old settings someplace for 'fixing' any possible problems no tweak is guaranteed to work, or not cause issues on your device, like anything else, they are at your own risk!!

For anyone that needs to do a hard reset and are at a point where they can't get to the icon for it in the menu:

Switch off your phone, Hold the CALL-END and the CALL-MAKE buttons simultaneously, don't let go of them, power on your device, keep on holding until you see the format screen, then release the buttons and make your choice. however this will not format your "My Storage" drive.

NOW:

HIS SCREEN IS ALMOST TOOO SENSITIVE!!

this is what worked for him:

Improve Screen Calibration (sensitivity)
1. Open your Registry Editor(PHM Registry Editor)
2. Go to HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/TOUCH/
3. Click on CalibrationData
4. Value Data change to > 519,503 177,881 182,129 847,127 849,872
5. Click OK to save it.

You may also wish to copy down the old data before you input the new one.
His OLD Value Data was 505,512 172,875 163,147 846,148 829,876 and yours might be different a bit.

I will report back after I try, but there have been others over at Howard's forum + Modeco saying it does work!!

*edit* There have been mixed results being reported, so this may/may not work for you, as I mentioned, please play safe and always have a backup!!

*NEXT*

The author of this one has joined the community!! Welcome Adrynalyne and thank you for the file, I am sure your work will be appreciated!!!!

The file that controls Samsung Today 2, secst.dll, is already on our device. So...if you install the Samsung Today 2 cab floating around, you are adding ~700kb of unnecessary wasted space, because you aren't overwriting the ROM file, really.

All is needed is to create a registry entry.

[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\ Samsung Today 2]
"Order"=dword:00000003
"Flags"=dword:00000000
"Enabled"=dword:00000001
"Options"=dword:00000001
"Type"=dword:00000005
"Selectability"=dword:00000002
"DLL"="secst.dll"

Thats it. Doesn't even require a reboot. This may also be the answer to those having issues with Samsung Today 2 on their VZW Omnias, too.

I was unable to import a .reg file with PHM registry editor, but if you have an app that can, here is the .reg file. (attached as 'sammy_2')

*NEXT*

For all the people that like using the mouse settings, or the d-pad settings but find it would be great to be able to switch on the fly (each can work better in different situations), take the attached file (Chfingermouse) place it in 'My Device > Windows > Startup > Programs' and then map it to a button (I use camera)! Works GREAT!!!

More to come!!!!

Hi, how do i go to my Registry Editor(PHM Registry Editor)??

**syrguy1969** · #9 (**permalink**) 02-13-2009, 03:12 PM

Quote:

Originally Posted by benjilim

Hi, how do i go to my Registry Editor(PHM Registry Editor)??

I am assuming PHM is alreasy installed. Just open it like any other app and use it like Explorer to get to where the reg setting your trying to get to is and it should be as easy as using the menu on the bottom bar and adding/changing settings accordingly. Reg changes can be tricky and dangerous to new users, so I would suggest either do a complete backup first, or ask in here for a specific reg tweak...most of them have been zipped for easy access!

**Adrynalyne** · #10 (**permalink**) 02-13-2009, 04:08 PM

I think he was referring to the i910.