How to get iGo8 run on TP2 with TTS enable and 2009 NA Maps (step by step guide)

[ACHlLLES]

Not sure in MB, and separately, but if you just follow OP's instructions and end up w/ a functional IGO8 folder, the total size of IGO8 folder should be little over 1GB.

[bdtran]

anyone having backlight problems with igo8? everytime i start up igo8 it restarts my backlight to the very minimum. even if i have auto backlight option unclicked, so i control it manually..everytime i start igo8 it automatically dims. Is there something i need to add to the sys file?or any help pls? thanks

[navychief52]

Originally Posted by bdtran

anyone having backlight problems with igo8? everytime i start up igo8 it restarts my backlight to the very minimum. even if i have auto backlight option unclicked, so i control it manually..everytime i start igo8 it automatically dims. Is there something i need to add to the sys file?or any help pls? thanks

I've added this to my sys.txt file, you may want to try it.


[power]
backlight_day=100
backlight_night=50
backlight_slow_api=1
backlight_sync_with_OS=0
battery_warning_limit=10
powermgm_state=0
skip_resume_process=1
skip_suspend_process=1

[lokmeup]

I cannot get this to work. I have tried everything in this thread and NOTHING works for my device. I am starting to think it is the AT&T Tilt 2 ROM that is preventing me from succeeding.

I tried everything in the first post, tried stopping TF3D, NoPushInternet_v2.CAB, SSK TP2 Dynamic Resource Proxy.cab, htcAddicts cleanRAM v1.8.zip... and still no TTS.

I know the TTS works, because I can still put the SD card into my Tilt (Kaiser) and get TTS. I just cannot get it to work on the Tilt 2. It also does not work on my wife's Tilt 2 (HTC TP2).

Thanks

[ACHlLLES]

If your problem is only TTS function not working properly, I wouldn't complain too much about it.

How much ram is free when you have the program on? It should have about 12x free when I read.

[lokmeup]

I thought voice directions as you drive is kinda the reason to have iGO? Well, that's my reason.

I have about 119mb free after a soft-reset, and 93mb with iGO running... is this my problem?

Kinda crappy that the original Tilt can run the TTS, but my new Tilt2 cannot.

[DarkLord]

Originally Posted by lokmeup

I thought voice directions as you drive is kinda the reason to have iGO? Well, that's my reason.

I have about 119mb free after a soft-reset, and 93mb with iGO running... is this my problem?

Kinda crappy that the original Tilt can run the TTS, but my new Tilt2 cannot.

the older version of Igo8 had problems with the TTS. the TTS voices had to be installed, then the the software would have to be unistalled, then reinstalled. for those of you having problems, use a similar method. Once the TTS voices are installed, then recopy all the other iGO info back to your card and over wright what was there (other than the maps). It worked like a charm for me. I'm not having any TTS problems anymore.

let me know if that works for anyone.

[oldman]

Here's a new issue for you. I want to edit the English6.9.lex dictionary.
I want to change it so that when the map says "S Main St" to read the "S" as South....or if it says Route 66 SB....to read Route 66 SouthBound.
I have tried a variety of text editors, and even downloaded the Loquendo SDK....Unfortunately, the only voices it has in the SDK is Italian.

Do you know how I can make changes like that. From what I understand, all I have to do is to make "SB=South Bound", or NB= North Bound.

If my syntax is incorrect, please correct...but the bigger problem is I can't find anything to edit the dictionary.

Can I add those statements to the sys.txt file?

Thanks for your help
Bob

PS: I have no issues at all running IGO8 on my Verizon TP2., although I am using vers 8.3.2.93112 (June 8, 2009). I'm not sure what improvements your newer versions has.

[xxxwutengxxx]

i can't even go the program to boot. I've used iGO8 before in the past w/ my TP1. I've followed step by step those instructions (had to use voice and lang files from my old iGO8, since the iGO8 only had the dem, building, map, and poi folders). I run iGO8.exe from explorer and my screen goes blank and stays that way (waited 10 minutes)with the sys.txt from the first post. If I use the original sys.txt that came with the iGO8, it shows the splash screen, but then goes away. I did receive a crash text file. Here's what it looks like. Oh, this is when I use it with the original sys.txt, the modified one from the first post doesn't give me anything, jus stays blank.

------------------------------------------------------
------------------------------------------------------
------------------ Crash Log Begin -------------------


Current System time: "2009-10-21 17:22:48"
Build: 8.3.1.57021 Built @ Sep 25 2008 - 12:23:35

Memory Stats:

FreeMemory: 93 MB, 220 KB, 0 B
TotalUseableMemory: 102 MB, 116 KB, 0 B
MaxMemory: 132 MB, 0 KB, 0 B
ReservedMemory: 4 MB, 0 KB, 0 B
ActualCacheSize: 1 MB, 757 KB, 452 B
GarbageSize: 1 MB, 757 KB, 452 B



--------------------------------------------------------------------------
Process Name PID BaseAddr ParentPID PrioBase
--------------------------------------------------------------------------
0x00000000 0x00000000 0x00000000 0x00000000
--------------------------------------------------------------------------
--------------------------------------------------
Modules Name BaseAddr BaseSize
--------------------------------------------------
et9dictionary.dll 0x79040000 0x0001e000
et9disinput.dll 0x012c0000 0x0000c000
htmlview.dll 0x03c7e000 0x00006000
et9ime.dll 0x78830000 0x0007e000
commctrl.dll.0409.mui 0x7ff80000 0x00002000
commctrl.dll 0x0322f000 0x0006a000
aygshell.dll 0x03793000 0x00057000
checkime.dll 0x01620000 0x00008000
toolhelp.dll 0x02f27000 0x00004000
ossvcs.dll 0x0300e000 0x00044000
oleaut32.dll 0x03052000 0x0002f000
coredll.dll.0409.mui 0x7ffe0000 0x00015000
ole32.dll 0x03081000 0x0002c000
coredll.dll 0x03f4a000 0x00097000
--------------------------------------------------

--------------------------------------------------------------
Threads TID BasePrio DeltaPrio
--------------------------------------------------------------
--------------------------------------------------------------


Exception: 0xc0000005
At address: 0x0021d430
Access violation reading address: 0x18000040
0x0021d430 (A)


WinCE CallStack snapshot (function names unknown - map file \Storage Card\iGO8\iGO8.map not found):

0x03f65c38 (A)
0x18521328 (A)
0x18521244 (A)
0x18520628 (A)
0x18520724 (A)
0x1805b97c (A)
0x1805b948 (A)
0x03f88048 (A)
0x03f8e484 (A)
0x80022b34 (A)
0x800509cc (A)
0x800271e8 (A)
0x80022a4c (A)
0x1821d430 (A)
0x1820e47c (A)
0x1820b400 (A)
0x184450ec (A)
0x184446e4 (A)
0x1844f068 (A)
0x1844cc64 (A)
0x1805e0b8 (A)
0x1806273c (A)
0x181879ac (A)
0x1827044c (A)
0x18195410 (A)
0x18195484 (A)
0x181854f4 (A)
0x18187a38 (A)
0x18188a34 (A)
0x18060ac0 (A)
0x1805b3c8 (A)
0x1805b8f0 (A)
0x185af218 (A)
0x03f67270 (A)


Global status:

bInFocus: 1
bMouseDown: 0
bInLogic: 0
bInRender: 0
CurrentState[128]:
GPS Pos: (0.000000,0.000000)
Camera: pos0.000000,0.000000) rot:0 persp:0 zoom:0.000000 eng=0)


State queue:



------------------- Crash Log End --------------------
------------------------------------------------------
------------------------------------------------------



------------------------------------------------------
------------------------------------------------------
------------------ Crash Log Begin -------------------


Current System time: "2009-10-21 17:23:30"
Build: 8.3.1.57021 Built @ Sep 25 2008 - 12:23:35

Memory Stats:

FreeMemory: 92 MB, 940 KB, 0 B
TotalUseableMemory: 101 MB, 836 KB, 0 B
MaxMemory: 132 MB, 0 KB, 0 B
ReservedMemory: 4 MB, 0 KB, 0 B
ActualCacheSize: 1 MB, 757 KB, 452 B
GarbageSize: 1 MB, 757 KB, 452 B



--------------------------------------------------------------------------
Process Name PID BaseAddr ParentPID PrioBase
--------------------------------------------------------------------------
0x00000000 0x00000000 0x00000000 0x00000000
--------------------------------------------------------------------------
--------------------------------------------------
Modules Name BaseAddr BaseSize
--------------------------------------------------
et9dictionary.dll 0x79040000 0x0001e000
et9disinput.dll 0x012c0000 0x0000c000
htmlview.dll 0x03c7e000 0x00006000
et9ime.dll 0x78830000 0x0007e000
commctrl.dll.0409.mui 0x7ff80000 0x00002000
commctrl.dll 0x0322f000 0x0006a000
aygshell.dll 0x03793000 0x00057000
checkime.dll 0x01620000 0x00008000
toolhelp.dll 0x02f27000 0x00004000
ossvcs.dll 0x0300e000 0x00044000
oleaut32.dll 0x03052000 0x0002f000
coredll.dll.0409.mui 0x7ffe0000 0x00015000
ole32.dll 0x03081000 0x0002c000
coredll.dll 0x03f4a000 0x00097000
--------------------------------------------------

--------------------------------------------------------------
Threads TID BasePrio DeltaPrio
--------------------------------------------------------------
--------------------------------------------------------------


Exception: 0xc0000005
At address: 0x0021d430
Access violation reading address: 0x18000040
0x0021d430 (A)


WinCE CallStack snapshot (function names unknown - map file \Storage Card\iGO8\iGO8.map not found):

0x03f65c38 (A)
0x18521328 (A)
0x18521244 (A)
0x18520628 (A)
0x18520724 (A)
0x1805b97c (A)
0x1805b948 (A)
0x03f88048 (A)
0x03f8e484 (A)
0x80022b34 (A)
0x800509cc (A)
0x800271e8 (A)
0x80022a4c (A)
0x1821d430 (A)
0x1820e47c (A)
0x1820b400 (A)
0x184450ec (A)
0x184446e4 (A)
0x1844f068 (A)
0x1844cc64 (A)
0x1805e0b8 (A)
0x1806273c (A)
0x181879ac (A)
0x1827044c (A)
0x18195410 (A)
0x18195484 (A)
0x181854f4 (A)
0x18187a38 (A)
0x18188a34 (A)
0x18060ac0 (A)
0x1805b3c8 (A)
0x1805b8f0 (A)
0x185af218 (A)
0x03f67270 (A)


Global status:

bInFocus: 1
bMouseDown: 0
bInLogic: 0
bInRender: 0
CurrentState[128]:
GPS Pos: (0.000000,0.000000)
Camera: pos0.000000,0.000000) rot:0 persp:0 zoom:0.000000 eng=0)


State queue:



------------------- Crash Log End --------------------
------------------------------------------------------
------------------------------------------------------

[DarkLord]

Originally Posted by xxxwutengxxx

i can't even go the program to boot.

delete everything and start over. i had to do that.