Native HTC messaging MMS fix (collaboration)

[ajent]

Probably hasn't realized it says successfully sent, but never actually sends.

[gregbolt]

Have spent some time on this checking out the settings given for the fix and just as everyone else on Sprint, no go!

Flashed back to factory to test and of course, it worked. After doing some digging, I exported the full Arcsoft Registry key to compare to HTC Messaging. One thing I noticed, Arcsoft is using http://mms.sprintpcs.com as the MMS server and using X-MDN in a different reg key. The UA profile and UA are using Sprint settings in the factory and using HTC in HTC messaging. The HTC settings are pointed to a valid website xml file. At the end of the file, it states "Copied from Rhodium-1.0."

So, of course, I reflashed EnergyRom 2.5 21884 12/17 and changed the Arcsoft settings and Jataayu Settings to reflect only the above website for MMS and added the MDN info as it was in Arcsoft on factory. Still no go. I have attached the reg export and the xml file that HTC Messaging is using as the UA. Any ideas???

[pdawg17]

Originally Posted by ziggy471

That's about right, and I haven't forgotten about the Sprint Users, that's why I spent so much time on this yesterday, that and all the snow. Once I finish my first cup of coffee, I'll start on it again today.


Z

Originally Posted by gregbolt

Have spent some time on this checking out the settings given for the fix and just as everyone else on Sprint, no go!

Flashed back to factory to test and of course, it worked. After doing some digging, I exported the full Arcsoft Registry key to compare to HTC Messaging. One thing I noticed, Arcsoft is using http://mms.sprintpcs.com as the MMS server and using X-MDN in a different reg key. The UA profile and UA are using Sprint settings in the factory and using HTC in HTC messaging. The HTC settings are pointed to a valid website xml file. At the end of the file, it states "Copied from Rhodium-1.0."

So, of course, I reflashed EnergyRom 2.5 21884 12/17 and changed the Arcsoft settings and Jataayu Settings to reflect only the above website for MMS and added the MDN info as it was in Arcsoft on factory. Still no go. I have attached the reg export and the xml file that HTC Messaging is using as the UA. Any ideas???

Why is Sprint being so difficult with us?! I hit the "Thanks" button as I appreciate the hard work trying to get this done...

[ziggy471]

Originally Posted by pdawg17

Why is Sprint being so difficult with us?! I hit the "Thanks" button as I appreciate the hard work trying to get this done...

It's really not Sprint's fault, if you refer to Post #124, I explained what is really happening. The reason I keep working on this is not just to help the Sprint users, but just in case VZW decides to stop ignoring the X-VZW-MDN variable.

I know what the problem is, but I can't seem to figure out where the setting to fix it goes. I've tried about everywhere I can think of, so I'm now at a great big brick wall. If anyone that understands where I'm at from reading #124, I can really use the help.


Z

[ziggy471]

Originally Posted by ajent

Probably hasn't realized it says successfully sent, but never actually sends.

I'd have to agree with you on this one, unless she started where I left off yesterday and found where to force it into CDMA and to insert the Originator.


Z

[Tink]

Originally Posted by ziggy471

I'd have to agree with you on this one, unless she started where I left off yesterday and found where to force it into CDMA and to insert the Originator.


Z

Damn........... Indeed, you are correct in that, even though it says that the msg was successfully sent, it never got there.... However, I sent myself a MMS and I actually received it and was able to open it... You know how every carrier has an email of sorts that actually sends picturemail (i.e., if you want to send a person that has Sprint a picturemail, there is the option to send it to: 1234567890@pm.sprint.com)..... it is actually a MMS....

Anyways, I was able to receive the MMS that way, but not able to send..... Darn.....Oh, I mean DAMN...

[S/\NDM/\N]

i have a ? in the mms server setting all the other carriers have a isp address wouldnt we want to put one in for sprint buz isnt our phone acking like a server when we send an mms.

[chris1683]

Can someone try making their MDN read as follows "+1XXXXXXXXXX" [The x's would be your phone number] The plus one may an important factor.

So it would be something like:
http ://mms.sprintpcs.com/servlets/mms?X-SPRINT-MDN=+1XXXXXXXXXX

I will give this a shot tomorrow but am working right and cannot check for myself.

[iceninja]

Originally Posted by chris1683

Can someone try making their MDN read as follows "+1XXXXXXXXXX" [The x's would be your phone number] The plus one may an important factor.

So it would be something like:
http ://mms.sprintpcs.com/servlets/mms?X-SPRINT-MDN=+1XXXXXXXXXX

I will give this a shot tomorrow but am working right and cannot check for myself.

Of course mms sent successfully but I didn't get anything back.

Ice

[deck]

i wasnt aware that there was a thread regaurding this problem. i have been working on this since the first tachi htc messaging client was released (191. Just to clarify a couple things...

no matter if you use:
http ://mms.sprintpcs.com/servlets/
http ://mms.sprintpcs.com/servlets/mms?X-SPRINT-MDN
http ://mms.sprintpcs.com/servlets/mms?X-SPRINT-MDN=+1XXXXXXXXXX
http ://mms.sprintpcs.com/servlets/mms?X-SPRINT-MDN=1XXXXXXXXXX
http ://mms.sprintpcs.com/servlets/mms?X-SPRINT-MDN=XXX-XXX-XXXX
http ://mms.sprintpcs.com/servlets/mms?X-SPRINT-MDN=XXXXXXXXXX
http ://mms.sprintpcs.com/servlets/mms?X-message-id
http ://mms.sprintpcs.com/servlets/mms?X-message-id=+1XXXXXXXXXX
http ://mms.sprintpcs.com/servlets/mms?X-message-id=1XXXXXXXXXX
http ://mms.sprintpcs.com/servlets/mms?X-message-id=XXX-XXX-XXXX
http ://mms.sprintpcs.com/servlets/mms?X-message-id=XXXXXXXXXX
your recieve will work, send will say it sent, and we all know what happens.

i really believe the solution has to do with this key. "ph1uzoe52iuw"
Can somebody sniff the information being sent while using arcsoft, then one using htc messaging client?

i am still working hard at getting this working myself, and will keep this thread updated on my progress. nice to know others are hard at work at it as well.

-deck