PPCGeeks - Solution on delay answer when data on (no hard reset needed!)

Page 8 of 13

Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- HTC Diamond (http://forum.ppcgeeks.com/forumdisplay.php?f=66)

- - Solution on delay answer when data on (no hard reset needed!) (http://forum.ppcgeeks.com/showthread.php?t=40427)

jimd144

11-18-2008 10:53 AM

Re: Solution on delay answer when data on (no hard reset needed!)

Quote:

Originally Posted by snovvman (Post 458469)

I had the same problem as many others: When data is on (active or dormant, EVDO or 1xRTT (dormant), it takes many seconds for the calls to be answered, the phone keeps ringing even though I pressed the answer key.

It does appear that one of the tweak applications created the problem, at least for some. After much research, this may be it...

Take a look at your HKLM/Comm/ConnMgr/Planner/Settings/SuspendResume

It is a multi-sz value and should be #777. If it shows anything like ~GPRS or something containing GPRS, change it back to #777 and soft reset.

When I used PHM Regedit to correct this, it seemed to crash (the reg editor never crashed before now). I had to use SKTool's regedit. I will create an export if this will help you.

Once I changed it back to #777, I can answer the call immediately when data is on, time and time again. Prior to this, there was a significant delay.

Please let me know if this works for you.

Edit: I also noticed that, with this correction, after the call, the data goes back to dormant rather than disconnected.

Unfortunately, that lleaves the data connection on full time, as it kills the data timeout

nuguy

11-18-2008 11:22 AM

Re: Solution on delay answer when data on (no hard reset needed!)

I just want to confirm so everyone knows:

This fix does work on the mogul/titan/6800 as well...

Simply:

download cab
unzip cab
end all data connections
run cab
install to device
say ok
tap power button
wait 10 seconds
reboot
fixed!

Many many thanks!

hemirunner426

11-26-2008 08:44 AM

Re: Solution on delay answer when data on (no hard reset needed!)

Does anyone know how to keep automatic data disconnect while still using this tweak? It does fix my dialer (opal dialer on vouge) but data remains active all the time unless i manually shut it down. Is there another tweak or a program to use for automatic data disconnect?

Suz416

12-01-2008 04:04 PM

Re: Solution on delay answer when data on (no hard reset needed!)

Quote:

Originally Posted by scidmail (Post 485915)

Diamond Tweak can mess it up too though. I don't have Advanced Config any more. After correcting the registry and making sure it worked, I went back into Diamond Tweak and selected disconnect after 1min (recommended setting). Performed a soft reset and tested by connecting to the internet and then calling myself. The delay/difficulty in answering was back. I then changed Diamond Tweak to Disable disconnection and did a soft reset. I tested again and it still would not pick up the call when connected to the internet. I had to go back into the registry and correct the entry. Now it answers correctly even when I'm connected to EVDO service.

Now my question is, if I have it check mail say every 4 hours will it disconnect the EVDO service in between the times it polls for new mail? If it does not disconnect, will this have an adverse affect on battery life?

Barb

Barb, I have Diamond tweak installed and I changed the very same entry that you did and I seem to be having the problem answering calls when connected to the internet (the phone rings and rings and even when I click on answer, it won't answer before it goes to voicemail)... what I have gotten lost in is exactly which reg edit you did to change it "back" to normal, and then did you apply the #777 edit? And it works? And your data turns off after the call?
Thanks so much,
Suz

scidmail

12-03-2008 11:32 PM

Re: Solution on delay answer when data on (no hard reset needed!)

Quote:

Originally Posted by Suz416 (Post 552884)

Fixing the item in Diamond Tweak won't fix the registry. You still have to do the #777 edit, or if you're using Total Commander is should look like this:
23 00 37 00 37 00 37 00
00 00 00 00

Barb

pdane

12-05-2008 02:44 AM

Re: Solution on delay answer when data on (no hard reset needed!)

EVDO Planner 600 to 60 Hack w777 fix.zip.zip
Hi there,

I have a Sprint HTC Touch Pro and I think that this program will help me with a problem that I am having but I wanted to check with more experienced users first.

I have recently added Emoze so that I can get push email. Unfortunately, with this app active I cannot answer phone calls. I think that it is because the data is active and will not turn off in time for the voice call to go through.

I am a complete novice when it comes to these phones and other than installing a cab file, I don't know how to do anything, like check a registry file or whatever it is that this cab file fixes.

Thanks again in advance for your help.

Payam

ign 5

12-13-2008 01:27 PM

Re: Solution on delay answer when data on (no hard reset needed!)

OK! so i use the phm editer and it crashes like whoever said it would, i put in juggalo installer, and still same problem...i did see that it changed it to #777/n i think the n just needs to be gone, i understand i need to cahnge it but i am having a hard time finding a program that wont crash when i get in that setting, someone please send me a link! please! help me!

pdane

12-13-2008 07:05 PM

Re: Solution on delay answer when data on (no hard reset needed!)

Quote:

Originally Posted by ign 5 (Post 576065)

I have been dealing with this problem for a few weeks. I finally downloaded FdcSoft taskmanager at http://www.dotfred.net/TaskMgr.htm . Using the regedit I was able to change the settings and it seems to work perfectly!!!

Calls come in and can be answered without a hitch. Even better Emoze works too!!!

linkmeup222

12-13-2008 10:10 PM

Re: Solution on delay answer when data on (no hard reset needed!)

ok.. so i changed the values to #777 and changed the cachetime to 60 but yet the arrows still show up grey for a long long time.. until i actually turn them off.. am i missing something so the connection is disconnected instead of on standby?

verngator

12-13-2008 10:22 PM

Re: Solution on delay answer when data on (no hard reset needed!)

I have a Touch - did the registry edit with Resco and it works great! There were times I could not get the phone to answer if a call came in while I was on the internet...thanks!

Of course I just ordered a Diamond...I'll try the same tweak when I get the Diamond.

Thanks!

All times are GMT -4. The time now is 02:37 AM.

Page 8 of 13

« First

Last »

Show 40 post(s) from this thread on one page

Content Relevant URLs by vBSEO 3.6.0