USB Problem PLEASE HELP!!!!

**CozBoogie** · #1 (**permalink**) 02-20-2009, 12:23 AM

Wrong forum...moved.

late,
Coz

solo624 · #2 (**permalink**) 02-20-2009, 09:27 AM

Does this post\question have to be moved or did you move it already?

gambatte · #3 (**permalink**) 02-20-2009, 11:10 AM

What do you have "Advanced Network Functionality" in Start>Connections>USB to PC checked or unchecked (on the device)? On the PC Activesync, did you reenable "Allow USB connections"? You had to disable when you flashed.

solo624 · #4 (**permalink**) 02-20-2009, 11:54 AM

Yes to your question. I tried it both ways enable\disabling in advanced configuration and enabling actvie sync through the USB port. Resetting etc...

The thing I'm confused with is that I have an older ROM and I go into Bootloader mode and plug in the USB cable it identifies the USB cable (Serial\USB) but it will not except the ROM and gives and error message. It's a timeout error.

So I'm not sure if it's related to MOB 6.1 and the USB configuration through Active Sync or it's internally related that there could be a problem.

With that being said why would be when Win Mob boots it's says device not recognized on the computer and in Bootloader mode and it recognizes usb? So it should except the ROM right if win Mob is corrupted ... Saying the USB port is ok?

I also tried several ver of Active Sync and WMD on Vista the same result.

It's like the xv6700 lost it's USB driver info.

I heard it's possible to boot from the SD card? and reload the drivers there?

gambatte · #5 (**permalink**) 02-20-2009, 12:39 PM

So you are sure everything is kosher on the PC side. When you connect the 6700 you get the "ding" and when you look in device manager you see "mobile remote adapter" or something like that under network adapters? And "HTC USB sync" under mobile devices? Have you changed the 6700 device name and not deleted/recreated the partnership? Don't use a USB hub. Still could be a bad cable, I guess. That's about all you can do. I don't think you can boot from the SD card as it would need the ROM; I've heard of flashing from the SD card. I don't know if the USB drivers are around in .CAB format.