|
||||
First thing to try is put the phone in bootloader (power, notes (tape button) and soft reset at once). Then connect it to the PC and try running the stock rom update exe file for your device. That will work in most cases like this.
__________________
Note: 3 Color screen is stuck in bootloader NOT "bricked"; just flash a stock rom exe
Touch Custom rom unlocker Undoing advances in Mogul's since 2007. Titan ReLocker, WM5 roms (don't use w/ gps radio): Telus, TNZ |
|
||||
Re:
ICM, thanks for the posted reply... My vista machine nor my xp machine will no longer recognize my xv6700. I flashed the rom and screen now reads:
SD Download = USB = Sections = 0 Download Completed CheckSum OK! 100% v1.02 ______________________________________________ Any further help would greatly be appreciated. |
|
||||
Re:
Quote:
btw what your miniSD size? can you dump it with ntrw? I like to know whats on it.. get ntrw here: ftp://ftp.tw.openbsd.org/pub/OpenBSD/4.0/tools/ntrw.exe ftp://ftp.funet.fi/.m/mirrors3/ftp.o...tools/ntrw.exe ftp://ftp.freebsdchina.org/pub/OpenB...tools/ntrw.exe ntrw howto: ntrw.exe read file drive: ntrw read sd_dump.bin [your sd drive, eg: f: g: or k:] example: ntrw read sd_dump.bin g: ntrw will dump you sdcard contain in raw format, if you dont mind please dump it and upload to ftp.. thanks |
|
||||
Renyssance (and anyone else)...
You should only use XP for flashing. Vista will only get you stuck in the bootloader mode. You might already know this, but I thought I'd say it since it wasn't mentioned in this thread yet and you have both available to you. Check out helmi_c's advice above. ^^^
__________________
Projects: (SlideSound) (Personal OEMizer (1.4.0 )) (TDial Designer (v1.1.1 )) (TierAutoinstall (1.9)) and more...
HTC Sliding Sound Control Panel replacement. | SprintTV on Mogul? Donations appreciated |
|
||||
helmi.. as you suggested I removed the miniSD [1.0GB] and attempted to start the device in bootloader mode. All I got was ascreen hat read:
Serial v1.02 this was until I connected the device to the cradle of course at which the word serial then changed to USB. Granted that this case was performed from my vista machine, I will attempt to get a different result from my X machine. Tell me, does ntrw require that my PDA be at least detected by the o.s.? if so I think I may be in need of another option. |
|
||||
USB.. v1.02 is all that it should read when in bootloader mode and connected to the PC, so that's correct. That's exactly what you want it to say before running the flash utility.
|
|
||||
Quote:
well 1gb sd card? well you can forget about ntrw then, its nothing usefull for you just for my curiosity... you better use xp for flashing... it should flash allright... |
|
||||
Ok tiermann & helmi..
I appreciate the help. I will flash and install from the XP machine. Is there a particular flash utility that would be of use here? And once the rom is flashed successfully should I then be able to load the rom update via Ative Sync or is there another option? |
|
||||
It is normal for your PC to not detect the device in the "usual" way when it is in bootloader... but if you go into Device Manager you should see a device called "Microsoft USB Sync" under the "Windows CE USB Devices" heading.
The fact that the PPC screen changes to "USB" from "Serial" when you plug it in means that it's seeing the computer just fine. But bootloader mode doesn't trigger activesync so maybe that's what is fooling you. I would suggest just running the latest official ROM update package from your carrier (you can download it at www.utstar.com). That should re-flash all 3 ROMs and get you back to a "known good" configuration. Then you can try to flash the custom again (and this time keep your daughter away from it ) |
|
|
|