[HSPL-UNLOCKER] - - Rhodium W HardSPL

[cmonex]

-continued from first post-


Manual SSPL download: (added soon)


Troubleshooting:

firstly:
- read the instructions above.
- read the instructions above.
- read the instructions above.
nothing happens on the device, does not enter black screen mode:
- anyone having problems with the device crashing instead of entering SSPL, make sure you've used Automatic flash mode before to put the device in SSPL (if you hard-reset your device, you have to repeat Automatic flash mode at least once).
- please make sure you watch the device screen if it asks about running files (it probably won't, I made sure of that, but just in case, check, for example it can warn about model incompatibility).
- also you can try unticking advanced usb/network functionality in settings on the device. exact location of this will probably be: start menu / settings / connections / usbtopc applet.
general usb connection error problems:
- if you get connection error in RUU after the device goes to black SSPL screen: make sure device was still synced via USB to the PC at the point of it entering SSPL (the black screen) and do not try replugging please, that will probably just crash SSPL.
- it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the USB connection is established in SSPL, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait a few minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process.
- anyone having problems with the device entering SSPL without functional USB port ("ERROR 260 CONNECTION" RUU error), you can get SSPL-Manual-Rhodium.exe from attachment in this post, copy it to the *device* itself and run it. then once the screen is showing black, run the Hard-SPL package on the PC and select Manual flash option. please do not use Manual flash option for any other purposes
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time it needs to do that), then if RUU times out, but device is still in black screen, just leave it there and re-run the Hard-SPL package when driver installation finishes - you must use Manual Flash option in such a case. I recommend to wait for Windows to take its time searching for the USB drivers, then click Next in RUU only when they are installed.
- finally, you can try disabling antivirus or firewall programs on the PC.
ModelID checking: if SSPL loader says it's for a different model or device, please make sure you are using the correct HardSPL package. currently this SSPL accepts only RHOD400, RHOD500 modelids i.e. the CDMA-GSM worldphone version, but if we get notified of another compatible RhodiumW version, we will instantly modify it to allow those models. check modelid by entering SPL tricolour screen manually and note what it says (RHOD400, RHOD500, or something else). note: RHOD1xx, 2xx, 3xx are not going to be compatible at all!
other issues:
- if device reports that Enterbootloader.exe fails to run (says missing component or corrupt signature or similar), try a hard reset.
- if device reboots instead of going to SSPL screen (black), which is very unlikely to happen, then contact us by PM to cmonex. do not PM OliNex user, that is not monitored frequently (and PM's to it are disabled now anyway).
- if none of the above help, read thread for further suggestions, if still nothing, make a post in thread describing all details about the exact situation.


how to reflash Stock/Shipped SPL: - STEP BY STEP - FOR WARRANTY REASONS ONLY!

0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the relocker, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL made by us). the included one is the 0.63.0000 stock SPL. 3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.63.0000, not 1.00.OliNex.


About UPDATES:

-new release coming soon, fixes a specific problem for a small group of people-
-more troubleshooting tips soon-

[jimpem]

worked like a charm. Thanks for all the hard work. Donation coming...

[rugby911]

Ok.. I have unlocked my phone any had custom roms on it before.. but today after installing a new rom :
Re: |R|6.5.5|ROM|WWE| ★ Energy "Leo" 23541/21892 |Feb 26| ★ Sense 2.5.2012 / MaxMani
Soo I NEED help.. I installed this software successfully and all was good.

(The 23541 Build is the one I used)

But I also after testing it all out and loving it.. I decided to put android on the SD card and try checking that out.

That worked out nicely as well actually. BUT I did a restart of the phone... and NOW I it just says Touch Pro 2.. then
the HTC logo with the "quietly Brilliant" text and audible chimes.
then the energy logo on the bottom of the screen like it's gonna load THEN reboots.. showing again
Touch Pro2 and in the left corner :

B 04
R 1.96 00WF
P DSDCABPZM-6125
D Energy Rom

-----------------------
As you can see it reboots. is there some way to go into bootloader mode on the phone direct THEN connect it to my laptop and RE-INSTALL a diffrent Rom once its up in tricolor mode?

I dont know what else to do.

Sprint TP2 here

[Telek]

Originally Posted by rugby911

Ok.. I have unlocked my phone any had custom roms on it before.. but today after installing a new rom :
Re: |R|6.5.5|ROM|WWE| ★ Energy "Leo" 23541/21892 |Feb 26| ★ Sense 2.5.2012 / MaxMani
Soo I NEED help.. I installed this software successfully and all was good.

(The 23541 Build is the one I used)

But I also after testing it all out and loving it.. I decided to put android on the SD card and try checking that out.

That worked out nicely as well actually. BUT I did a restart of the phone... and NOW I it just says Touch Pro 2.. then
the HTC logo with the "quietly Brilliant" text and audible chimes.
then the energy logo on the bottom of the screen like it's gonna load THEN reboots.. showing again
Touch Pro2 and in the left corner :

B 04
R 1.96 00WF
P DSDCABPZM-6125
D Energy Rom

-----------------------
As you can see it reboots. is there some way to go into bootloader mode on the phone direct THEN connect it to my laptop and RE-INSTALL a diffrent Rom once its up in tricolor mode?

I dont know what else to do.

Sprint TP2 here

Just do a search for loading ROMs via the SD card - probably the same way that you tried android.

http://tinyurl.com/yelcn8e

I need to relock my phone so I can sell it to a friend. I tried this RELOCKER, but it hangs up on the Progress bar. Is there any way to fix this? Thanks!

[razorloves]

Originally Posted by cabindoor

I need to relock my phone so I can sell it to a friend. I tried this RELOCKER, but it hangs up on the Progress bar. Is there any way to fix this? Thanks!

you know this is for tp2, right? Just makin sure since your profile says you have a tp. Otherwise, are you successfully synced with the computer? Gives us a step by step of what you're doing so we can see if you're doin somethin wrong.

Yeah, I have a TP2. Sorry about that. The phone is successfully synced with the computer. It just hangs on the progress bar at 0%.

[razorloves]

Originally Posted by cabindoor

Yeah, I have a TP2. Sorry about that. The phone is successfully synced with the computer. It just hangs on the progress bar at 0%.

try unchecking the box under "Activesync" in usb to pc settings on the phone then start over.

[ModmyPPC]

Originally Posted by cmonex

how to reflash Stock/Shipped SPL: - STEP BY STEP - FOR WARRANTY REASONS ONLY!

0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
1. download the Relocker by clicking here, extract the zip and run the EXE on your PC
2. if you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL made by us). the included one is the 0.63.0000 stock SPL. 3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 0.63.0000, not 1.00.OliNex.

I flashed the stock 6.1 then the relocker and it still showed the 1.00 olinex on the tricolour screen.

Anyway to view this to confirm/deny? or did I do something wrong?

[ModmyPPC]

Originally Posted by ModmyPPC

I flashed the stock 6.1 then the relocker and it still showed the 1.00 olinex on the tricolour screen.

Anyway to view this to confirm/deny? or did I do something wrong?

Bump since No body answered!