|ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors

[chufo68]

can someone please post the regedit to get INPUT option back under personal settings. i can't activate my touchpal. i'm searchin all over with no luck. i know i've seen it here before. thanks

[ajac]

anyone else getting constant manila freezes up?

[Riptide9]

Originally Posted by Dead_Cow

I want to second (or third or fourth or whatever I am). I love this ROM, but I need the battery to last longer than 8 hours (that's with WiFi and BT and Location off!)

Been doing some testing and here is what I have come up with...

Started with Fresh flash (Feb22 Std) with nothing installed

1) Installed the attached battery monitor (Attached file 01)to check settings

Battery DisChargeCurrent 250-285 mA
ChargeCurrent 450 mA (usb 2.0 lets me know quick charge isn't working - should be 900+ mA)

2) Installed the attached nuebattery2 driver (Attached file 02)and enabled quick charge settings and don't round percentage to re-enable 1% reading and reset

Battery DisChargeCurrent 250-285 mA
ChargeCurrent 922 mA (now it is quick charging)

3) A lot people are supecting that the battery issue is related to bluetooth whether you are using it or not so I installed the SprintStockBTDlls (Attached file 03) file
**This is key -----> Enabled BT first, installed dll's cab, reset, then disabled BT...
It has been found that installing this cab with BT off will prevent BT from working

Original thread from mrmediaguy at Mighty's for reference on this subject:
http://forum.ppcgeeks.com/showpost.php?p=1544672&postcount=17174


Battery
DisChargeCurrent 164mA (plugged into activesync via usb 2.0)

Battery DisChargeCurrent 46mA (unplugged)

To me this is a substantial difference in discharge and charging amounts.

I think this warrants more testing.

[PrsnlCrcl]

Originally Posted by btstarcher

I just went back to the stock 6.1 and programmed it; when I tried to connect it gave me the username/password message and "Error Code : 11, PPP Connection Failure." Dadgummit.

If this issue is the same "authentication" issue that I have run into in the past, the only way to fix it is to call verizon. They need to do something in the switches to clear the issue. I tried flashing multiple ROM's trying to clear it the first time I ran into it and it would not work until I called Verizon. What happens when you try to make a phone call? Does a lady come on and say "we are unable to authenticate your phone at this time?"

[welrope]

Originally Posted by Riptide9

Been doing some testing and here is what I have come up with...

Started with Fresh flash (Feb22 Std) with nothing installed

1) Installed the attached battery monitor to check settings

Battery DisChargeCurrent 250-285 mA
ChargeCurrent 450 mA (usb 2.0 lets me know quick charge isn't working - should be 900+ mA)

2) Installed the attached nuebattery2 driver and enabled quick charge settings and don't round percentage to re-enable 1% reading and reset

Battery DisChargeCurrent 250-285 mA
ChargeCurrent 922 mA (now it is quick charging)

3) A lot people are supecting that the battery issue is related to bluetooth whether you are using it or not so I installed the SprintStockBTDlls file from this thread http://forum.ppcgeeks.com/showpost.php?p=1544672&postcount=17174

Enabled BT, reset, disabled BT...

Battery
DisChargeCurrent 164mA (plugged into activesync via usb 2.0)

Battery DisChargeCurrent 46mA (unplugged)

To me this is a substantial difference in discharge and charging amounts.

I think this warrants more testing.

Battery life is wonderful here, im on my second day and battery hasn't fell below 80 percent yet. Hopefully, by the end of the week, i will post back and let you guys know how it went

[Mazzakre]

Originally Posted by chaseclear

im sure this has already been addressed, but I haven't seen anything on it recently.. I was wondering if there is any program/way to allocate some of the storage memory to the program memory since mine hovers at about 50k~ most of the time.

.....no.....

[glenwill]

Originally Posted by redlegend

Sounds like there's at least a few of us that want the old style back. Anyone prefer the new style? I noticed the Feb 22 ROMs have the same new bubble style.

Any input from NRG on this one? Any way (cab) to get the old style back? Or are we stuck with it for good? The HTC messaging app is almost quicker than this one.

thanks in advance

My own preference for messaging is one that doesn't require a bunch of fixes to make Sprint work for MMS! The current one is working with only a settings cab loaded to enter Sprint settings.

[murducky]

Originally Posted by welrope

Battery life is wonderful here, im on my second day and battery hasn't fell below 80 percent yet. Hopefully, by the end of the week, i will post back and let you guys know how it went

what battery tweaks/mods are you running? I pulled my tp2 off the charger at 100% this morning at 7:10am its 1:47pm now and the battery is at 53%.


I have my backlight at 8 bars. I have the disconnect data after 60 sec cab.

[Comstar]

For people with battery problems try this. It's a repost of mine from the TP1 days. I've been doing this for a long time now, everytime I flash, and my battery life is always MUCH improved. It was much researched and has worked for a lot of other people too. If anyone wants more of an explanation I can dig up more of the old posts. But basically the phone constantly polls the phone postion to mute the ring. There is a HD tweak for it but it never seems to change this entry.

Give it a try. I know it used to get cooked into TP1 Roms.


Here is the reg edit:

HKLM\Software\HTC\PHONE\
FaceDownMuteRing (change to 0)

Make sure to soft reset

^ hey Murducky probably remembers it!

[xjgriffx]

are these new roms cfc compressed?