Post Your SDconfig.txt, provisioning.xml, etc. Files Here! - Page 34

**elephant007** · #**331** (**permalink**) 07-14-2009, 10:27 PM

Quote:

Originally Posted by DomSim

could be the properties of the .lnk. they could be set as read only, or if you are moving them into a folder and the .lnk already exists there you may need to set the overwrite to true

I'll try that, thing is if I run the script a second time without making any changes to the script, it works... I'll try your suggestions though, thank you

dahray02 · #**332** (**permalink**) 07-14-2009, 11:00 PM

okay so i just read through this whole thread....i am currently on an old 6.1 rom and am thinking about moving to a 6.5 one....i've been hesitant to change roms cuz i didnt want to have to redo all tha tweaks i've made to it....someone pointed me to this thread. most of tha programs i have are installed on my sd card not the phone mem...my first question is: Is there somewhere i can look to double check which app is on my internal mem and which is on my sd card.....next for the ones on my sd card, with this UC thing, i shouldnt have to reinstall them, but..all the registry entries they use will be gone, if i go into my registry now HKLM/Software....do i just copy that whole folder to keep all tha entries that my apps use? for instance my registration code for Sprite Backup/Terminator...without tha registry entries i lose those...so to sum up i want to upgrade to a newer rom and keep all the settings for the apps installed on my card

ontop of that, how do i restore my contacts and texts...thats all, i'll manually redo my email, and all tha apps installed on my internal mem...thanks in advance

dahray02 · #**333** (**permalink**) 07-16-2009, 06:21 PM

ok how about i tackle one problem at a time....how do get the registration info for Sprite..or Slingbox, i would believe those are in tha registry...and the apps are installed on my sd card...so a re installation shouldnt be needed

strickly_ppc670 · #**334** (**permalink**) 07-21-2009, 10:29 AM

Can some one help me out in configuring Yahoo email?
Activesync and gmail was a snap- Yahoo is throwing me a curve ball.

Code:

<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{02000c0f-0910-0c02-0902-0303030a0010}">
<parm name="CONNECTIONID" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="SERVICENAME" value="Yahoo!" />
<parm name="SERVICETYPE" value="POP3" />
<parm name="INSERVER" value="pop.mail.yahoo.com" />
<parm name="OUTSERVER" value="smtp.mail.yahoo.com"/>
<parm name="NAME" value="" />
<parm name="AUTHNAME" value="stricklando" />
<parm name="AUTHSECRET" value="XXXXXXX" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="stricklando@yahoo.com" />
<parm name="FORMAT" value="2" />
<parm name="LINGER" value="15" />
<parm name="RETRIEVE" value="51200" />
<parm name="KEEPMAX" value="" />
<parm name="DWNDAY" value="3" />
<characteristic type="TAGPROPS">
<parm name="8128000B" value="1"/>
<parm name="812C000B" value="1"/>
</characteristic>
<parm name="AUTHREQUIRED" value="1" />
<parm name="SMTPALTENABLED" value="0" />
<parm name="SMTPALTAUTHNAME" value="" />
<parm name="SMTPALTPASSWORD" value="" />
</characteristic>
</characteristic>

Is there a way to cab up the email stuff?

Thanks

**elephant007** · #**335** (**permalink**) 07-21-2009, 11:18 AM

Quote:

Originally Posted by strickly_ppc670

Can some one help me out in configuring Yahoo email?
Activesync and gmail was a snap- Yahoo is throwing me a curve ball.

Code:

<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{02000c0f-0910-0c02-0902-0303030a0010}">
<parm name="CONNECTIONID" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="SERVICENAME" value="Yahoo!" />
<parm name="SERVICETYPE" value="POP3" />
<parm name="INSERVER" value="pop.mail.yahoo.com" />
<parm name="OUTSERVER" value="smtp.mail.yahoo.com"/>
<parm name="NAME" value="" />
<parm name="AUTHNAME" value="stricklando" />
<parm name="AUTHSECRET" value="XXXXXXX" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="stricklando@yahoo.com" />
<parm name="FORMAT" value="2" />
<parm name="LINGER" value="15" />
<parm name="RETRIEVE" value="51200" />
<parm name="KEEPMAX" value="" />
<parm name="DWNDAY" value="3" />
<characteristic type="TAGPROPS">
<parm name="8128000B" value="1"/>
<parm name="812C000B" value="1"/>
</characteristic>
<parm name="AUTHREQUIRED" value="1" />
<parm name="SMTPALTENABLED" value="0" />
<parm name="SMTPALTAUTHNAME" value="" />
<parm name="SMTPALTPASSWORD" value="" />
</characteristic>
</characteristic>

Is there a way to cab up the email stuff?

Thanks

Do you need to add specific port numbers for Yahoo! other than the default? something like smtp.mail.yahoo.com:587
I haven't figured out the CAB thing, what I have figured out is using CERegEditor to take a snap shot of the registry before configuring something and after configuring it, comparing the two and then making a cab out of the difference... it's all built into CERegEditor

most of my registry tweaks are in a CAB file

strickly_ppc670 · #**336** (**permalink**) 07-21-2009, 02:23 PM

Quote:

Originally Posted by elephant007

Do you need to add specific port numbers for Yahoo! other than the default? something like smtp.mail.yahoo.com:587
I haven't figured out the CAB thing, what I have figured out is using CERegEditor to take a snap shot of the registry before configuring something and after configuring it, comparing the two and then making a cab out of the difference... it's all built into CERegEditor

most of my registry tweaks are in a CAB file

All Im missing is the port? Do I add it to my "smtp.mail.yahoo.com" with a simple change to "smtp.mail.yahoo.com:587"? I tried the editor, but it will not load on my computer at work... go figure.... thanks for the info!

strickly_ppc670 · #**337** (**permalink**) 07-21-2009, 04:52 PM

Quote:

Originally Posted by strickly_ppc670

Can some one help me out in configuring Yahoo email?
Activesync and gmail was a snap- Yahoo is throwing me a curve ball.

Code:

<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{02000c0f-0910-0c02-0902-0303030a0010}">
<parm name="CONNECTIONID" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="SERVICENAME" value="Yahoo!" />
<parm name="SERVICETYPE" value="POP3" />
<parm name="INSERVER" value="pop.mail.yahoo.com" />
<parm name="OUTSERVER" value="smtp.mail.yahoo.com"/>
<parm name="NAME" value="" />
<parm name="AUTHNAME" value="stricklando" />
<parm name="AUTHSECRET" value="XXXXXXX" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="stricklando@yahoo.com" />
<parm name="FORMAT" value="2" />
<parm name="LINGER" value="15" />
<parm name="RETRIEVE" value="51200" />
<parm name="KEEPMAX" value="" />
<parm name="DWNDAY" value="3" />
<characteristic type="TAGPROPS">
<parm name="8128000B" value="1"/>
<parm name="812C000B" value="1"/>
</characteristic>
<parm name="AUTHREQUIRED" value="1" />
<parm name="SMTPALTENABLED" value="0" />
<parm name="SMTPALTAUTHNAME" value="" />
<parm name="SMTPALTPASSWORD" value="" />
</characteristic>
</characteristic>

Is there a way to cab up the email stuff?

Thanks

---- Can someone help with a Yahoo XML script? Thanks

**elephant007** · #**338** (**permalink**) 07-21-2009, 11:45 PM

Quote:

Originally Posted by strickly_ppc670

---- Can someone help with a Yahoo XML script? Thanks

you have the xml script there
just need to end it with
</wap-provisioningdoc>

did a one second search on Google and found something you might be interested in
http://forum.xda-developers.com/show....php?p=2851179

**elephant007** · #**339** (**permalink**) 07-22-2009, 02:09 PM

Quote:

Originally Posted by DomSim

could be the properties of the .lnk. they could be set as read only, or if you are moving them into a folder and the .lnk already exists there you may need to set the overwrite to true

Your suggestion did not work, although it gave me an idea which did work

I made a mortscript that will move the icons like I need it to, then I have the mortscript delete itself!!

I use SDConfig to copy the file to \Windows\Startup so when the PPC reboots, it will run the mscr (mortscript) file from \Windows\Startup and delete itself because that's what it's supposed to do

This resolved my issue

DomSim · #**340** (**permalink**) 07-22-2009, 05:14 PM

Quote:

Originally Posted by elephant007

Your suggestion did not work, although it gave me an idea which did work

I made a mortscript that will move the icons like I need it to, then I have the mortscript delete itself!!

I use SDConfig to copy the file to \Windows\Startup so when the PPC reboots, it will run the mscr (mortscript) file from \Windows\Startup and delete itself because that's what it's supposed to do

This resolved my issue

i do exactly this myself which is where i ran into the issue you were having. i had to have my mortscript also change the file attributes. but glad you got it figured out.